Site Map Contact Us Terms and Conditions

call us on +44 (0)1823 698437 or email moc/rtnotgniver//ofni
Follow us on Twitter Find us on Facebook Blogger Email

Choose Car Type


then
Search for parts
or
Browse
for parts

WASHER

Part No:
WP0008

This part appears on the following Triumph Catalogue Plates

Car Type Plate Plate Title Plate No. Triumph Part Description No per Unit
TR2 A ENGINE: CYLINDER BLOCK AND HEAD A80A Washer, plain, under nut 2
TR2 G ENGINE: 1-1/2" SU CARBURETTORS. G82 Washer, plain, between lever and split pin
From Engine No. 1
1
TR2 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR2 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR2 GS ENGINE: 1-3/4" SU CARBURETTORS. GS80 Washer, plain, between lever and split pin
From Engine No. 8997E
1
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31A Washer, plain, on bolt
From Comm. No. TS1
1
TR2 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31AO Washer, plain I
TR2 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T35 Washer, plain, between spring washer and cotter pin
From Comm. No. TS1
2
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26L Washer, plain, dynamo to bracket
From Engine No. 10346E
A/R
TR2 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26U Washer, plain, on setscrew
From Engine No. 1
1
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR2 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S26 Washer, plain, between cotter pin and fork-end 1
TR2 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S47 Washer, plain, between cotter pin and fork-end 2
TR2 K GEARBOX: CASING, TOP COVER AND MOUNTING. K13 Washer, plain, on screws
From Comm. No. TS1
2
TR2 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W26AH Washer, plain, under nut
From Comm. No. TS13046
1
TR2 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR2 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17 Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17 Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR2 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR3 A ENGINE: CYLINDER BLOCK AND HEAD A80A Washer, plain, under nut 2
TR3 G ENGINE: 1-1/2" SU CARBURETTORS. G82 Washer, plain, between lever and split pin
From Engine No. 1
1
TR3 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR3 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR3 GS ENGINE: 1-3/4" SU CARBURETTORS. GS80 Washer, plain, between lever and split pin
From Engine No. 8997E
1
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31A Washer, plain, on bolt
From Comm. No. TS1
1
TR3 R STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. R31AO Washer, plain I
TR3 T PEDALS: ACCELERATOR, CLUTCH AND BRAKE. T35 Washer, plain, between spring washer and cotter pin
From Comm. No. TS1
2
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26L Washer, plain, dynamo to bracket
From Engine No. 10346E
A/R
TR3 C ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). C26U Washer, plain, on setscrew
From Engine No. 1
1
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 AN BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. AN14 Washer, plain, under nut 2
TR3 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S26 Washer, plain, between cotter pin and fork-end 1
TR3 S HANDBRAKE: LEVER, CABLES AND COMPENSATOR. S47 Washer, plain, between cotter pin and fork-end 2
TR3 K GEARBOX: CASING, TOP COVER AND MOUNTING. K13 Washer, plain, on screws
From Comm. No. TS1
2
TR3 W HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. W26AH Washer, plain, under nut
From Comm. No. TS13046
1
TR3 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR3 AW OVERDRIVE UNIT DETAILS. AW45 Washers, plain, on setscrew 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17 Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X17 Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR3 X EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. X20A Washer, plain, on bolt 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 Z EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. Z11 Washer, plain Silencer to tail pipe 2
TR4 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR4 JA ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). J9 Washer, plain Dynamo to bracket rear as req'd.
TR4 BB OVERDRIVE: OVERDRIVE UNIT DETAILS BB54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4 BB OVERDRIVE: OVERDRIVE UNIT DETAILS BB54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4 HS ENGINE: 1-3/4" STROMBERG CARBURETTORS. HS70 Washer, plain Lever to manifold
Fitted from Engine No. CT16801E up to CT16900E and from CT and future
1
TR4 W CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. W10 Washer, plain Master cylinder fork ends to pedals 2
TR4 U HANDBRAKE: LEVER, CABLES AND COMPENSATOR. U47 Washer, plain, between cotter pin and fork-end 2
TR4 Y HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. Y24 Washer, plain, under nut 1
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW27 Washer, plain Support tubes to overiders 2
TR4 AW BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. AW66 Washer, plain Tie rods to overiders 2
TR4A A 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD A82 Washer, plain Rocker cover attachment 2
TR4A M 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). M9 Washer, plain Dynamo to bracket rear as req'd.
TR4A M 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). M9 Washer, plain Dynamo to bracket rear as req'd.
TR4A K 83 m.m. and 86 m.m. ENGINE: 1-3/4" STROMBERG CARBURETTORS. K70 Washer, plain manifold
Fitted up to Engine No only
1
TR4A KS 83 m.m. and 86 m.m. ENGINE: 1-3/4" SU CARBURETTORS. KS74 Washer, plain Securing bellcrank lever to support bracket
Fitted from Engine No and future
1
TR4A L 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. L4 Washer, plain Air cleaner to carburettor
Normal Fitment
4
TR4A L 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. L17 Washer, plain Air cleaner to carburettors
Special orders only
4
TR4A BJ OVERDRIVE: OVERDRIVE UNIT DETAILS (Rigid axles only). BJ54 Washer, plain Attaching Solenoid bracket to front casing 2
TR4A BK OVERDRIVE: OVERDRIVE UNIT DETAILS (independent rear axles only). BK53 Washer, plain Attaching solenoid bracket to front casing 2
TR4A AG RADIATOR AND OVERFLOW BOTTLE. TOOLS AND SERVICE KITS (Not illustrated). AG12 Washer, plain Stay to front suspension box 4
TR4A AB CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. AB10 Washer, plain Master cylinder fork ends to pedals 2
TR4A AFS EXHAUST SYSTEM: SINGLE REAR TRANSVERSE SILENCER TYPE. AFS27 Washer Securing silencer to rear end of Intermediate pipe and mounting bracket
Fitted from Comm. No and future
1
TR4A AQ BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. AQ38 Washer, plain Body mounting spare wheel pan 1
TR4A AT BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. AT7 Washer, plain Bonnet hinge to closing panel 4
TR4A AT BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. AT9 Washer, plain Bonnet hinge to front stiffener assembly 8
TR4A AW BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. AW68 Washer, plain Support bracket to fixing bracket 2
TR4A AW BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. AW68 Washer, plain Support bracket to fixing bracket 2
TR4A BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. BD60 Washer, plain Tie rods to overiders 2
TR250 AE ELECTRICAL EQUIPMENT: Distributor and Ignition Coil AE31 Washer, plain - Ignition coil attachment 2
TR250 B ENGINE: Cylinder Head B51 Washer, plain - Rocker cover to cylinder head studs 3
TR250 V STEERING V22 Washer, plain - Securing joint to columns 2
TR250 V STEERING V61 Washer, plain - Rack and pinion body to frame 4
TR250 AQ BODY FITTINGS: Body Shell to Chassis Mountings AQ44 Washer, plain - Body mounting spare wheel pan 1
TR250 M ENGINE: Alternator Mounting M5 Washer, plain Alternator to mounting bracket 1
TR250 M ENGINE: Alternator Mounting M5 Washer, plain Alternator to mounting bracket 1
TR250 X ACCELERATION CONTROL X20 Washer, plain - Bell crank lever to support bracket 1
TR250 AT BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies AT7 Washer, plain - Bonnet hinge to closing panel 4
TR250 AT BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies AT10 Washer, plain - Bonnet hinge to front stiffener assembly 8
TR250 AW BODY AND FITTINGS: Facia Panel Assembly AW66 Washer, plain - Support bracket to fixing bracket 2
TR250 AW BODY AND FITTINGS: Facia Panel Assembly AW66 Washer, plain - Support bracket to fixing bracket 2
TR250 Y BRAKE CONTROLS: Clutch and Brake Pedal, and Master Cylinder Y14 Washer, plain - Master cylinder fork ends to pedals 2
TR250 N CLUTCH N41 Washer, plain - Slave cylinder push rod to clutch operating lever 1
TR250 N CLUTCH N41 Washer, plain - Slave cylinder push rod to clutch operating lever 1
TR250 W HANDBRAKE W27 Washer, plain - Fork end to wheel cylinder lever and cable 2
TR250 BC BODY AND FITTINGS: Bumpers BC60 Washer, plain - Tie rods to overriders 2
TR250 AC EXHAUST SYSTEM AC23 Washer - Flexible strip to bracket and chassis frame 1
TR5 AF ELECTRICAL EQUIPMENT: DISTRIBUTOR AND IGNITION COIL AF33 Washer, plain Ignition coil attachment 2
TR5 U STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS U22 Washer, plain Securing joint to columns 2
TR5 U STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS U61 Washer, plain Rack and pinion body to frame 4
TR5 AR BODY AND FITTINGS: COMPLTE BODY AND BODY MOUNTINGS AR44 Washer, plain Body mounting spare wheel pan 1
TR5 B ENGINE: CYLINDER HEAD B51 Washer, plain Rocker cover to cylinder head studs 3
TR5 K ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS K5 Washer, plain Alternator to mounting bracket 1
TR5 K ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS K5 Washer, plain Alternator to mounting bracket 1
TR5 AU BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION AU7 Washer, plain Bonnet hinge to closing panel 4
TR5 AU BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION AU10 Washer, plain Bonnet hinge to stiffener front assembly 8
TR5 X CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT X9A Washer, plain Pedal box to dash-R.H.S. only 2
TR5 X CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT X14 Washer, plain Master cylinder fork ends to pedals 2
TR5 AX BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME AX66 Washer, plain Support bracket to fixing bracket 2
TR5 AX BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME AX66 Washer, plain Support bracket to fixing bracket 2
TR5 L CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER L41 Washer, plain Slave cylinder push rod to clutch operating lever 1
TR5 L CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER L41 Washer, plain Slave cylinder push rod to clutch operating lever 1
TR5 V HANDBRAKE: LEVER AND CABLES V27 Washer, plain Fork end to wheel cylinder lever and cable 2
TR5 BJ OVERDRIVE: ASSEMBLY DETAILS BJ53 Washer, plain Attaching solenoid bracket to front casing 2
TR5 BD BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS BD60 Washer, plain Tie rods to overriders 2
TR5 AC EXHAUST SYSTEM AND MOUNTINGS AC26 Washer Strip to brackets and chassis 1
TR6CP AX ELECTRICAL EQUIPMENT: Distributor and Coil AX33 WASHER, plain - Ignition coil attachment 2
TR6CP P ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies P51 WASHER, plain -Rocker cover to cylinder head studs 3
TR6CP AH STEERING AH59 WASHER, plain - Rack and pinion body to frame 4
TR6CP BH BODY AND FITTINGS: Body Shell Complete and Mounting BH44 WASHER, plain - Body mounting spare wheel pan 1
TR6CP BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CP BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CP AL ACCELERATION CONTROL (PETROL INJECTION MODEL) AL56W WASHER, plain, fast idle cam to mounting bracket
Fitted from Engine No. CF1 HE
1
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CP BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CP BL BODY AND FITTINGS: Radiator Grill and Bonnet Assembly BL7 WASHER, plain - Bonnet hinge to bonnet 8
TR6CP BS BODY AND FITTINGS: Boot Assembly and Rear Decals BS4 WASHER, plain - Hinges to trunk lid 6
TR6CP CB OVERDRIVE: Unit Assembly CB53 WASHER, plain Attaching solenoid bracket to front casing 2
TR6CP AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM9B WASHER, plain - Pedal box to dash - R.H.S. only 2
TR6CP AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM14 WASHER, plain - Master cylinder fork ends to pedals 2
TR6CP Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CP Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CP BV BODY AND FITTINGS: Bumpers BV6 WASHER, plain - Front bumper side fixing
Fitted up to Comm. No. CF1
2
TR6CP BV BODY AND FITTINGS: Bumpers BV39 WASHER, plain Securing bumper to side bracket
Fitted up to Comm. No. CP26933 and CC31778
2
TR6CP AJ HANDBRAKE AJ27 WASHER, plain - Fork end to wheel cylinder lever and cable 2
TR6CP AU EXHAUST SYSTEM (PETROL INJECTION MODEL) AU26 WASHER - Strip to brackets and chassis 1
TR6CC AX ELECTRICAL EQUIPMENT: Distributor and Coil AX33 WASHER, plain - Ignition coil attachment 2
TR6CC B ENGINE (Carburettor Model): Cylinder and Rocker Assemblies B51 WASHER, plain -Rocker cover to cylinder head studs 3
TR6CC AH STEERING AH59 WASHER, plain - Rack and pinion body to frame 4
TR6CC BH BODY AND FITTINGS: Body Shell Complete and Mounting BH44 WASHER, plain - Body mounting spare wheel pan 1
TR6CC BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CC BP BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame BP66 WASHER, plain - Support bracket to fixing bracket 2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CC BQ BODY AND FITTINGS: Steering Outer Column BQ34D WASHER,plain-Securing upper clamp to lower
Fitted from Body No. 50,001 wherever lock type steering is fitted
2
TR6CC BL BODY AND FITTINGS: Radiator Grill and Bonnet Assembly BL7 WASHER, plain - Bonnet hinge to bonnet 8
TR6CC BS BODY AND FITTINGS: Boot Assembly and Rear Decals BS4 WASHER, plain - Hinges to trunk lid 6
TR6CC CB OVERDRIVE: Unit Assembly CB53 WASHER, plain Attaching solenoid bracket to front casing 2
TR6CC AK ACCELERATION CONTROL (CARBURETTOR MODEL) AK20 WASHER, plain - Bell crank lever to support bracket 1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR10AQ WASHER, plain - Securing bracket assembly canister mounting
Fitted from Body No. CC62448 up to ............
1
TR6CC AR PETROL SYSTEM (CARBURETTOR MODEL) AR11BH WASHER, plain - Securing bracket assembly canister mounting 1
TR6CC AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM9B WASHER, plain - Pedal box to dash - R.H.S. only 2
TR6CC AM CLUTCH, BRAKE PEDALS & MASTER CYLINDER AM14 WASHER, plain - Master cylinder fork ends to pedals 2
TR6CC Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CC Y CLUTCH: Clutch Assembly and Operation Y41 WASHER, plain - Slave cylinder push rod to clutch operating lever 1
TR6CC BV BODY AND FITTINGS: Bumpers BV6 WASHER, plain - Front bumper side fixing
Fitted up to Comm. No. CF1
2
TR6CC BV BODY AND FITTINGS: Bumpers BV39 WASHER, plain Securing bumper to side bracket
Fitted up to Comm. No. CP26933 and CC31778
2
TR6CC AJ HANDBRAKE AJ27 WASHER, plain - Fork end to wheel cylinder lever and cable 2
TR6CC AT EXHAUST SYSTEM (CARBURETTOR MODEL) AT23 WASHER - Flexible strip to bracket and chassis frame 1
TR6CF 20-32 ENGINE (CARBURETTOR MODELS) 20-32 WASHER PLAIN 5/16 X 5/8 X .075 3
TR6CF 20-32 ENGINE (CARBURETTOR MODELS) 20-32 WASHER PLAIN 5/16 X 5/8 X .075 3

To view the Triumph Catalogue Plates, please pick a car type