Site Map Contact Us Terms and Conditions

call us on +44 (0)1823 698437 or email moc/rtnotgniver//ofni
Follow us on Twitter Find us on Facebook Blogger Email

Choose Car Type


then
Search for parts
or
Browse
for parts

Engine, Transmission and Heating/Cooling

TR4A Plate A - 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD

  Plate No. Part No. Description and Comments No Per Unit Price Add to Cart
A1AA
514659
ENGINE UNIT 86 mm

Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1BB
514660
ENGINE UNIT 83 mm

Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1CC
514659/R
ENGINE UNIT 86 mm Recondition Unit

Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1DD
514660/R
ENGINE UNIT 83 mm Recondition Unit

Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1EE
514760
ENGINE UNIT 86 mm

Remarks: LOW COMPRESSION ENGINE. For use in countries where High Octane fuel is unobtainable. Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1FF
514760/R
ENGINE UNIT 86 mm Recondition Unit

Remarks: LOW COMPRESSION ENGINE. For use in countries where High Octane fuel is unobtainable. Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs.

1  
A1GG
514744

CLICK FOR
MORE INFO

DECARBONISING GASKET SET 86 mm

1  
A1HH
514745

CLICK FOR
MORE INFO

DECARBONISING GASKET SET 83 mm

1  
A1II
514746

CLICK FOR
MORE INFO

ENGINE GASKET SET 86 mm

1  
A1JJ
514747

CLICK FOR
MORE INFO

ENGINE GASKET SET 83 mm

1  
A1
502363

CLICK FOR
MORE INFO

CYLINDER BLOCK

not available new, use second hand part 502363SH

1  
A2
Cap, bearing Front

Remarks: Not serviced

 
A2A
Cap, bearing Centre

Remarks: Not serviced

 
A3
Cap, bearing Rear

Remarks: Not serviced

 
A4
058335

CLICK FOR
MORE INFO

Packing, felt, rear bearing cap

2
Ex VAT: £2.70
Inc VAT: £3.24

A5
057121

CLICK FOR
MORE INFO

Screw, set Bearing caps to block

6
Ex VAT: £3.16
Inc VAT: £3.79

A6
101587

CLICK FOR
MORE INFO

Washer, spring Bearing caps to block

This item has been superceded by WS108143133 - see below

6  
WS108143133
WASHER SPRING 1/2" RECT SECTION

6
Ex VAT: £0.09
Inc VAT: £0.11

A7
056405

CLICK FOR
MORE INFO

Bush, oil pump drive shaft

1
Ex VAT: £37.25
Inc VAT: £44.70

A7A
044473

CLICK FOR
MORE INFO

Plug, core, rear of camshaft

1
Ex VAT: £1.37
Inc VAT: £1.64

A7B
056765

CLICK FOR
MORE INFO

Plug, core, oil gallery ends

TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly.

2
Ex VAT: £3.45
Inc VAT: £4.14

A8
102785

CLICK FOR
MORE INFO

Strew, Set Oil gallery side

May need to consider second hand.

3  
A9
500463

CLICK FOR
MORE INFO

Washer, copper Oil gallery side

This item has been superceded by WC10711064 - see below

3  
WC10711064
WASHER COPPER 7/16 x 11/16 x .064

3
Ex VAT: £0.48
Inc VAT: £0.58

A9A
HU0954

CLICK FOR
MORE INFO

Screw, set Oil gallery side

This item has been superceded by SH506041 - see below

1  
SH506041
SCREW 3/8 UNC X 1/2 INCH

1
Ex VAT: £0.85
Inc VAT: £1.02

A9B
500464

CLICK FOR
MORE INFO

Washer, copper Oil gallery side

This item has been superceded by WC10610080 - see below

1  
WC10610080
WASHER COPPER 3/8 X 5/8 X .080"

1
Ex VAT: £0.98
Inc VAT: £1.18

A10
061478

CLICK FOR
MORE INFO

Tap, water drain

1
Ex VAT: £9.56
Inc VAT: £11.47

A11
WF0511

CLICK FOR
MORE INFO

Washer, fibre, water drain tap

This item has been superceded by WF10812062 - see below

1  
WF10812062
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK

1
Ex VAT: £0.24
Inc VAT: £0.29

A11A
WF0525

CLICK FOR
MORE INFO

Washer, fibre, water drain tap

This item has been superceded by WF10812062 - see below

as req'd.  
WF10812062
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK

as req'd.
Ex VAT: £0.24
Inc VAT: £0.29

A12
113570

CLICK FOR
MORE INFO

Stud, cylinder head attachment, front and centre of block - R.H. side

1/2"UNC

2
Ex VAT: £9.41
Inc VAT: £11.29

A13
121734

CLICK FOR
MORE INFO

Stud, cylinder head attachment; rear of block - R.H. side

1
Ex VAT: £17.08
Inc VAT: £20.50

A14
113169

CLICK FOR
MORE INFO

Stud, cylinder head attachment, adjacent to centre of cylinder head - R.H. side

2
Ex VAT: £11.42
Inc VAT: £13.70

A15
106959

CLICK FOR
MORE INFO

Stud, cylinder head attachment, front centre and rear of block - L.H. side

Head stud for various applications from TR2 - TR4A

3
Ex VAT: £9.58
Inc VAT: £11.50

A16
106960

CLICK FOR
MORE INFO

Stud, cylinder head attachment, adjacent to centre of cylinder head - L.H. side

2
Ex VAT: £7.67
Inc VAT: £9.20

A16A
V7318

CLICK FOR
MORE INFO

Stud, oil pump attachment

This item has been superceded by ST705111 - see below

3  
ST705111
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC

3
Ex VAT: £0.56
Inc VAT: £0.67

A17
V7322

CLICK FOR
MORE INFO

Stud, petrol pump attachment

This item has been superceded by ST705111 - see below

2  
ST705111
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC

2
Ex VAT: £0.56
Inc VAT: £0.67

A18
V7322

CLICK FOR
MORE INFO

Stud, distributor pedestal attachment

This item has been superceded by ST705111 - see below

2  
ST705111
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC

2
Ex VAT: £0.56
Inc VAT: £0.67

A19
V7318

CLICK FOR
MORE INFO

Stud, front engine plate and timing cover attachment

This item has been superceded by ST705111 - see below

1  
ST705111
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC

1
Ex VAT: £0.56
Inc VAT: £0.67

A20
DP0512

CLICK FOR
MORE INFO

Dowel, locating front engine plate

This item has been superceded by DP514 - see below

2  
DP514
DOWEL 5/16 DIA X 7/8" LONG

2
Ex VAT: £0.96
Inc VAT: £1.15

A21
V7318

CLICK FOR
MORE INFO

Stud, gearbox attachment

This item has been superceded by ST705111 - see below

3  
ST705111
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC

3
Ex VAT: £0.56
Inc VAT: £0.67

A22AA
DP0612

CLICK FOR
MORE INFO

Dowel, locating gearbox on rear face of cylinder block

This item has been superceded by DP619 - see below

2  
DP619
DOWEL 3/8" DIA x 1.5" LONG Cut to fit

2
Ex VAT: £1.29
Inc VAT: £1.55

A22
112170

CLICK FOR
MORE INFO

Stud Oil filter (pressure) attachment lower front

This item has been superceded by ST705171 - see below

1  
ST705171
STUD 5/16 UNC/UNF2-1/8

1
Ex VAT: £1.60
Inc VAT: £1.92

A22A
DN3408

CLICK FOR
MORE INFO

Nut, cap Oil filter (pressure) attachment lower front

This item has been superceded by 14B2685 - see below

1  
14B2685
NUT DOME 5/16 UNF CHROME

1
Ex VAT: £1.03
Inc VAT: £1.24

A23
112233

CLICK FOR
MORE INFO

Bolt, oil filter (pressure) attachment, upper front

This item has been superceded by BH505101 - see below

1  
BH505101
BOLT 5/16 UNC X 1-1/4 INCH

1
Ex VAT: £0.67
Inc VAT: £0.80

A24
112231

CLICK FOR
MORE INFO

Bolt, oil filter (pressure) attachment, upper rear

This item has been superceded by BH505321 - see below

1  
BH505321
BOLT 5/16 UNC X 4 INCH

1
Ex VAT: £2.27
Inc VAT: £2.72

A25
112232

CLICK FOR
MORE INFO

Bolt, oil filter (pressure) attachment, lower rear

This item has been superceded by BH505241 - see below

1  
BH505241
BOLT 5/16 UNC X 3 INCH

1
Ex VAT: £1.72
Inc VAT: £2.06

A25A
WL0208

CLICK FOR
MORE INFO

Washer, lock, fitted on bolts

This item has been superceded by WS105090853 - see below

3  
WS105090853
WASHER SPRING 5/16" ID RECT SECTION

3
Ex VAT: £0.15
Inc VAT: £0.18

A26
055810

CLICK FOR
MORE INFO

FRONT SEALING BLOCK

Consider original second hand part 055810SH

1  
A27
059381

CLICK FOR
MORE INFO

Pad, sealing, in ends of block

2
Ex VAT: £0.63
Inc VAT: £0.76

A28
056574

CLICK FOR
MORE INFO

Screw, sealing block attachment

2
Ex VAT: £1.29
Inc VAT: £1.55

A29
060862

CLICK FOR
MORE INFO

REAR OIL SEAL ASSEMBLY

This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The

1
Ex VAT: £44.67
Inc VAT: £53.60

A30
HU0755

CLICK FOR
MORE INFO

Screw, set Oil seal to cylinder block

This item has been superceded by SH504051 - see below

8  
SH504051
SCREW 1/4 UNC X 5/8"

8
Ex VAT: £0.21
Inc VAT: £0.25

A30A
WL0207

CLICK FOR
MORE INFO

Washer, spring Oil seal to cylinder block

This item has been superceded by WS104070643 - see below

8  
WS104070643
WASHER SPRING 1/4" RECT SECTION

8
Ex VAT: £0.13
Inc VAT: £0.16

A31
122166

CLICK FOR
MORE INFO

CYLINDER LINER (Graded F, G, H) 86 mm Engine

Liner 86mm. Standard

4
Ex VAT: £46.78
Inc VAT: £56.14

A32
112789

CLICK FOR
MORE INFO

Gasket, liner 86 mm Engine

Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium.

2
Ex VAT: £2.24
Inc VAT: £2.69

A31
105539

CLICK FOR
MORE INFO

CYLINDER LINER (Graded F, G, H) 83 mm Engine

Liners 83mm Standard

4
Ex VAT: £44.60
Inc VAT: £53.52

A32
112789

CLICK FOR
MORE INFO

Gasket, liner 83 mm Engine

Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium.

2
Ex VAT: £2.24
Inc VAT: £2.69

A33
304711

CLICK FOR
MORE INFO

FRONT ENGINE PLATE

the pin is 056763

1  
A34
056389

CLICK FOR
MORE INFO

Washer, joint Engine plate attachment to cylinder block

1
Ex VAT: £0.96
Inc VAT: £1.15

A34A
HU0856

CLICK FOR
MORE INFO

Screw, set Engine plate attachment to cylinder block

This item has been superceded by SH505061 - see below

5  
SH505061

CLICK FOR
MORE INFO

SCREW 5/16 UNC X 3/4 INCH

5
Ex VAT: £0.46
Inc VAT: £0.55

A34B
WL0208

CLICK FOR
MORE INFO

Washer, spring Engine plate attachment to cylinder block

This item has been superceded by WS105090853 - see below

5  
WS105090853
WASHER SPRING 5/16" ID RECT SECTION

5
Ex VAT: £0.15
Inc VAT: £0.18

A35
130985

CLICK FOR
MORE INFO

FRONT ENGINE MOUNTING

This round engine mounting was fitted to TR4. The square type part number 143057 was fitted to TR4A. The parts are however interchangeable.

2
Ex VAT: £10.00
Inc VAT: £12.00

A36
HN2009

CLICK FOR
MORE INFO

Nut Mounting to engine plate and frame

This item has been superceded by NP606111 - see below

4  
NP606111
NUT PLAIN 3/8 UNF X 11/32" (STD)

4
Ex VAT: £0.08
Inc VAT: £0.10

A37
WL0209

CLICK FOR
MORE INFO

Washer, lock Mounting to engine plate and frame

This item has been superceded by WS106111243 - see below

4  
WS106111243
WASHER SPRING 3/8" RECT SECTION

4
Ex VAT: £0.15
Inc VAT: £0.18

A37A
134234

CLICK FOR
MORE INFO

Washer, packing Mounting to engine plate and frame

This item has been superceded by WP106381572 - see below

2  
WP106381572

CLICK FOR
MORE INFO

WASHER PLAIN 3/8 X 2-3/8 X .157

Stainless steel washer, supporting diff mounting, replaces 134234.

2
Ex VAT: £11.12
Inc VAT: £13.34

REAR ENGINE MOUNTING (For details see Gear Box Section)

 
A38
115350

CLICK FOR
MORE INFO

OIL SUMP ASSEMBLY

Consider alloy sump 301318 or second hand part 115350SH

1  
A39
211123

CLICK FOR
MORE INFO

Washer, joint, between sump and cylinder block

This is a thinner paper gasket tha tit more suitable for this application.

1
Ex VAT: £4.13
Inc VAT: £4.96

A40
114774

CLICK FOR
MORE INFO

Plug, oil drain

The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted.

1
Ex VAT: £3.00
Inc VAT: £3.60

A41
100749

CLICK FOR
MORE INFO

Screw, set Sump to cylinder block

This item has been superceded by SH505061 - see below

16  
SH505061

CLICK FOR
MORE INFO

SCREW 5/16 UNC X 3/4 INCH

16
Ex VAT: £0.46
Inc VAT: £0.55

A41A
HU0855
Screw, set Sump to front sealing block

1  
A41B
105220

CLICK FOR
MORE INFO

Screw, set Slave cylinder stay to sump and cylinder block

This item has been superceded by BH505101 - see below

2  
BH505101
BOLT 5/16 UNC X 1-1/4 INCH

2
Ex VAT: £0.67
Inc VAT: £0.80

A42
WL0208

CLICK FOR
MORE INFO

Washer, lock, on set screws

This item has been superceded by WS105090853 - see below

19  
WS105090853
WASHER SPRING 5/16" ID RECT SECTION

19
Ex VAT: £0.15
Inc VAT: £0.18

A43
102139

CLICK FOR
MORE INFO

Dipstick

1
Ex VAT: £20.17
Inc VAT: £24.20

A44
032307

CLICK FOR
MORE INFO

Washer, felt

1
Ex VAT: £1.08
Inc VAT: £1.30

A45
132924

CLICK FOR
MORE INFO

Plug, closing, breather pipe aperture

1
Ex VAT: £2.06
Inc VAT: £2.47

A46
514748

CLICK FOR
MORE INFO

COMBUSTION HEAD ASSEMBLY (Complete with valves and springs) 86 mm

TR4A New cast iron cylinder head with unleaded seats, built up with valves, springs, caps etc. ready to fit. Suitable for 86mm engines. Will also fit TR2-4 with suitable manifolds and gaskets.

1
Ex VAT: £1583.33
Inc VAT: £1900.00

A46A
514749

CLICK FOR
MORE INFO

COMBUSTION HEAD ASSEMBLY (Complete with valves and springs) 83 mm

1  
A46B
511695

CLICK FOR
MORE INFO

COMBUSTION HEAD ASSEMBLY (Less valves and springs) 86 mm

TR4A New cast iron cylinder head fully machined with unleaded seats and guides, but with no valves, springs, caps etc. ready to accept your own parts. Suitable for 86mm engines.

1
Ex VAT: £1450.00
Inc VAT: £1740.00

A46C
511785

CLICK FOR
MORE INFO

COMBUSTION HEAD ASSEMBLY (Less valves and springs) 83 mm

83mm head

1  
A46D
PS1603

CLICK FOR
MORE INFO

Plug, core, top face of combustion head

1
Ex VAT: £3.77
Inc VAT: £4.52

A47
100792

CLICK FOR
MORE INFO

Tube, sealing

These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads.

8
Ex VAT: £4.20
Inc VAT: £5.04

A48
058923

CLICK FOR
MORE INFO

Guide, valve Inlet

Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A.

4
Ex VAT: £1.97
Inc VAT: £2.36

A49
058923

CLICK FOR
MORE INFO

Guide, valve Exhaust

Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A.

4
Ex VAT: £1.97
Inc VAT: £2.36

A49A
111913

CLICK FOR
MORE INFO

Insert, valve seat Inlet

as req'd.  
A49B
102941

CLICK FOR
MORE INFO

Insert, valve seat Exhaust

as req'd.  
A49C
027378

CLICK FOR
MORE INFO

Plug, core, rear face of head

Remarks: Fitted up to Engine No. only

1
Ex VAT: £1.38
Inc VAT: £1.66

A49D
144648

CLICK FOR
MORE INFO

Plug, core, rear face of head

Remarks: Fitted from Engine No. and future

1
Ex VAT: £0.98
Inc VAT: £1.18

A49E
114774

CLICK FOR
MORE INFO

Plug, (not required when heater is fitted)

The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted.

1
Ex VAT: £3.00
Inc VAT: £3.60

A49F
HU0953

CLICK FOR
MORE INFO

Screw, set Fitted in cylinder head for rocker oil feed

This item has been superceded by SH506031 - see below

1  
SH506031
SCREW HEX 3/8UNC X 3/8 INCH

1  
A49G
500464

CLICK FOR
MORE INFO

Washer, copper Fitted in cylinder head for rocker oil feed

This item has been superceded by WC10610080 - see below

1  
WC10610080
WASHER COPPER 3/8 X 5/8 X .080"

1
Ex VAT: £0.98
Inc VAT: £1.18

A50
111717

CLICK FOR
MORE INFO

Stud, rocker pedestal

This item has been superceded by ST706251 - see below

4  
ST706251
STUD 3/8 X3-1/8" 1-1/8"UNF1/2"UNC

4
Ex VAT: £1.99
Inc VAT: £2.39

A51
059011

CLICK FOR
MORE INFO

Stud, rocker cover

This item has been superceded by ST705301 - see below

2  
ST705301

CLICK FOR
MORE INFO

STUD 5/16 X 3-3/4" 5/8UNF+1/2UNC

This stud is mainly used for holding the standard rocker cover on TR2-4A. If you have an aluminium rocker cover fitted then a slightly longer stud ST705341 will most likely be required. Consider also fitting kit...

2
Ex VAT: £1.84
Inc VAT: £2.21

A51A
058917

CLICK FOR
MORE INFO

Stud, manifold attachment 1 15/16" long

This item has been superceded by ST506152 - see below

1  
ST506152
STUD 3/8 X 1-15/16" UNC+ UNC

1
Ex VAT: £2.53
Inc VAT: £3.04

A51B
058688

CLICK FOR
MORE INFO

Stud, manifold attachment 1 11/16" long

This item has been superceded by ST506132 - see below

1  
ST506132
STUD 3/8 X 1-11/16" UNC+ UNC

1
Ex VAT: £1.18
Inc VAT: £1.42

A51C
102474

CLICK FOR
MORE INFO

Stud, manifold attachment 2.06' long

This item has been superceded by ST506162 - see below

4  
ST506162
STUD 3/8 X 2.06" UNC+ UNC

4
Ex VAT: £1.42
Inc VAT: £1.70

A51D
107055

CLICK FOR
MORE INFO

Stud, manifold attachment 2.38' long

This item has been superceded by ST506191 - see below

2  
ST506191
STUD 3/8 X 2-3/8 UNC+ UNC

2
Ex VAT: £2.27
Inc VAT: £2.72

A51E
DP0512

CLICK FOR
MORE INFO

Dowel, manifold attachment

This item has been superceded by DP514 - see below

2  
DP514
DOWEL 5/16 DIA X 7/8" LONG

2
Ex VAT: £0.96
Inc VAT: £1.15

A52
205481

CLICK FOR
MORE INFO

Gasket Between combustion head and cylinder block 86 mm

Should you require a complete head gasket set, order GEG178 below.

1
Ex VAT: £17.33
Inc VAT: £20.80

A52
202127

CLICK FOR
MORE INFO

Gasket Between combustion head and cylinder block 83 mm

No longer available. Use 205481 or gasket set 505281. This is an 86mm gasket

1  
A52A
208096

CLICK FOR
MORE INFO

Plate, low compression-86 mm

Remarks: For use in countries where High Octane fuel is unobtainable

1  
A52B
202775

CLICK FOR
MORE INFO

Gasket, low compression plate-86 mm

TR2-4A Steel shim head gasket 87mm - 0.5mm (0.020") thick when compressed
Remarks: For use in countries where High Octane fuel is unobtainable

1
Ex VAT: £101.33
Inc VAT: £121.60

A53
110962

CLICK FOR
MORE INFO

Nut Combustion Head attachment

10 required

10
Ex VAT: £1.26
Inc VAT: £1.51

A54
WP0029

CLICK FOR
MORE INFO

Washer, pialn Combustion Head attachment

This item has been superceded by WP108140753 - see below

10  
WP108140753
WASHER PLAIN 1/2" x 7/8" X 0.075" HARDENED

Hardened cylinder head stud attachment Washer " Internal diameter x 7/8" Outside diameter for underneath the cylinder head nut of TR2-TR4A and other engines with " diameter studs.

10
Ex VAT: £1.69
Inc VAT: £2.03

A54A
121231

CLICK FOR
MORE INFO

Eye, lifting, assembly, front

1  
A54B
121752

CLICK FOR
MORE INFO

Bracket, lifting, rear

consider second hand part 121752SH.

1
Ex VAT: £7.29
Inc VAT: £8.75

A54C
WL0033

CLICK FOR
MORE INFO

Washer, plain, lifting eye

This item has been superceded by WL33 - currently not available

1  
VALVES

 
A55
107626

CLICK FOR
MORE INFO

Valve Inlet

4
Ex VAT: £6.42
Inc VAT: £7.70

A56
136567

CLICK FOR
MORE INFO

Valve Exhaust

32.89mm Head Diameter. For larger valves, gas flowed, see RTR1119

4
Ex VAT: £10.27
Inc VAT: £12.32

A57
142135

CLICK FOR
MORE INFO

Spring, valve Outer

Singular valve springs are now not available separately. Please order car set RTR1148

8  
A58
142136

CLICK FOR
MORE INFO

Spring, valve Inner

Singular valve springs are now not available separately. Please order car set RTR1148

8  
A59
142137

CLICK FOR
MORE INFO

Collar, valve spring

Alloy caps are RTR1120

8
Ex VAT: £3.84
Inc VAT: £4.61

A60
106663

CLICK FOR
MORE INFO

Cone, split, retaining collar on valve

There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half.

8 prs.
Ex VAT: £3.34
Inc VAT: £4.01

A61
057933

CLICK FOR
MORE INFO

VALVE TAPPET

Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.

8
Ex VAT: £4.21
Inc VAT: £5.05

A62
106968

CLICK FOR
MORE INFO

PUSH ROD ASSEMBLY

Consider second hand original part 106968SH or for competition use RTR1155.

8
Ex VAT: £10.25
Inc VAT: £12.30

A62A
108616

CLICK FOR
MORE INFO

PUSH ROD (To be used in conjunction with Compression Plate 208096 in countries where High Octane fuel is unobtainable)

use 106968SH

8  
A63
111064

CLICK FOR
MORE INFO

ROCKER SHAFT

Consider tuftrided part RTR1103.

1
Ex VAT: £30.82
Inc VAT: £36.98

A64
112545

CLICK FOR
MORE INFO

Pedestal, rocker, drilled

Not available new singularly. Order second hand part 112545SH or new set 112545X. The non-drilled part is 112546SH.

1  
A65
042880

CLICK FOR
MORE INFO

Screw, locking, pedestal to shaft

1  
A66
112546

CLICK FOR
MORE INFO

Pedestal, rocker, plain

Not available new singularly. Order second hand part 112546SH or new set 112545X. The drilled part is 112545SH.

3  
A67
HN2009

CLICK FOR
MORE INFO

Nut, rocker pedestal to combustion head

This item has been superceded by NP606111 - see below

4  
NP606111
NUT PLAIN 3/8 UNF X 11/32" (STD)

4
Ex VAT: £0.08
Inc VAT: £0.10

A68
WP0184

CLICK FOR
MORE INFO

Washer, plain, rocker pedestal to combustion head

This item has been superceded by WP10612075 - see below

4  
WP10612075
WASHER PLAIN 3/8 X 3/4 TABLE3

4
Ex VAT: £0.21
Inc VAT: £0.25

A69
108012

CLICK FOR
MORE INFO

Rocker assembly No.1

4
Ex VAT: £7.93
Inc VAT: £9.52

A70
108014

CLICK FOR
MORE INFO

Rocker assembly No. 2

4
Ex VAT: £8.25
Inc VAT: £9.90

A70A
044370

CLICK FOR
MORE INFO

Bush, rocker

16
Ex VAT: £2.40
Inc VAT: £2.88

A71
109495

CLICK FOR
MORE INFO

Screw, adjustment Fitted in rockers

All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC...

8
Ex VAT: £3.01
Inc VAT: £3.61

A72
057110

CLICK FOR
MORE INFO

Nut, lock Fitted in rockers

This item has been superceded by 51K1178 - see below

8  
51K1178

CLICK FOR
MORE INFO

LOCKNUT ROCKER ADJ.

5/16" UNF locknut rocker adjusting TR2-6

8
Ex VAT: £0.33
Inc VAT: £0.40

A73
128074

CLICK FOR
MORE INFO

Spring, rocker Centre

1  
A74
130481

CLICK FOR
MORE INFO

Spring, rocker Intermediate

2  
A75
044630

CLICK FOR
MORE INFO

Spring, rocker Outer

This item has been superceded by WT11016 - see below

2  
WT11016
WASHER THACKERY 5/8 INCH

No longer available

2  
A75
044630

CLICK FOR
MORE INFO

Spring, rocker Outer

This item has been superceded by WT11016 - see below

2  
WT11016
WASHER THACKERY 5/8 INCH

No longer available

2  
A76
060733

CLICK FOR
MORE INFO

Collar, on ends of shaft

2
Ex VAT: £1.52
Inc VAT: £1.82

A77
058334

CLICK FOR
MORE INFO

Pin, (Mills), securing collar

This item has been superceded by 500975 - see below

2  
500975

CLICK FOR
MORE INFO

MILLS PIN 1/8"x1"

2
Ex VAT: £0.42
Inc VAT: £0.50

A78
306527

CLICK FOR
MORE INFO

ROCKER COVER ASSEMBLY

Rocker cover, TR4A with Twist oil fitter cap and breather pipe. This part is not available new. Consider a second hand part 306527SH or a rechromed part 306527RCEX.

1  
A79
143393

CLICK FOR
MORE INFO

Cap, oil filler

This item has been superceded by GZC1400 - see below

1  
GZC1400
OIL FILLER CAP

1
Ex VAT: £1.72
Inc VAT: £2.06

A80
121219

CLICK FOR
MORE INFO

Washer, joint, cover to combustion head

This item has been superceded by GEG437 - see below

1  
GEG437

CLICK FOR
MORE INFO

GASKET ROCKER COVER TR2-4A

Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess.

1
Ex VAT: £4.42
Inc VAT: £5.30

A81
YN2908

CLICK FOR
MORE INFO

Nut, nyloc Rocker cover attachment

This item has been superceded by NY605141 - see below

2  
NY605141
NYLOC 5/16 UNF X 7/16 THICK

2
Ex VAT: £0.33
Inc VAT: £0.40

A82
WP0008

CLICK FOR
MORE INFO

Washer, plain Rocker cover attachment

This item has been superceded by WP10510075 - see below

2  
WP10510075
WASHER PLAIN 5/16 X 5/8 X .075

2
Ex VAT: £0.23
Inc VAT: £0.28

A83
WF0508

CLICK FOR
MORE INFO

Washer, fibre Rocker cover attachment

This item has been superceded by WF10510056 - see below

2  
WF10510056
WASHER FIBRE 5/16 I/D X 5/8 OD

2
Ex VAT: £0.45
Inc VAT: £0.54