Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate Q - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
Q1 | 208051 |
MAINSHAFTRevington TR information: Gearbox Mainshaft. No Longer Available, use 208051SH |
1 | ||
|
Q2 | 116496 |
Washer, between 1st gear and bearing |
1 |
£43.81 Ex VAT @ 20% |
|
|
Q3 | 058391 |
Bearing, mainshaft centreRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
|
Q4 | 058955 |
Circlip, locating bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
|
|
Q5 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
|
Q6 | 059443 |
Washer, between circiip and bearingRevington TR information: This washer sits between the rear bearing and the retaining circlip in TR2-3B gearbox. Not available new. Use second hand part 059443SH Parts 058949 and 059443 are very similar however 058949 won't fit on the... READ MORE |
1 | ||
|
Q7 | 058949 |
Washer Mainshaft rearRevington TR information: Washer mainshaft TR2-3B gearbox. Not available new. Use second hand part 058949SH Parts 058949 and 059443 are very similar however 058949 won't fit on the mainshaft adjacent to the rear main bearing. Technical information: - ... READ MORE |
1 | ||
|
Q8 | SP756 |
Bearing Mainshaft rearThis item has been superceded by SP75G - see below |
1 | ||
|
SP75G |
BEARING 4SYNC O/D RR ANNRevington TR information: Remove circlip when using in a Lockheed axle application. |
1 |
£18.70 Ex VAT @ 20% |
||
|
Q9 | 058948 |
Flange, mainshaftRevington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE |
1 | ||
|
Q10 | 057868 |
Nut, slotted Flange to mainshaftRevington TR information: see also 057868SH |
1 |
£6.78 Ex VAT @ 20% |
|
|
Q11 | WP0024 |
Washer, plain Flange to mainshaft |
1 |
£1.03 Ex VAT @ 20% |
|
|
Q12 | P00012 |
Pin, split Flange to mainshaftThis item has been superceded by PS108091 - see below |
1 | ||
|
PS108091 |
PIN SPLIT 1/8 X 1-1/8 |
1 |
£0.26 Ex VAT @ 20% |
||
|
Q13 | 128100 |
Gear, 1st speedThis item has been superceded by 152770 - see below |
1 | ||
|
152770 |
1ST GEAR TR6Revington TR information: This 1st speed gear also fits TR4-5. We have good stock of very usable second hand parts. |
1 |
£61.21 Ex VAT @ 20% |
||
|
Q14 | 129940 |
Bush, 1st speed |
1 |
£49.69 Ex VAT @ 20% |
|
|
Q14A | 129941 |
Washer, fitted between 1st gear and mainshaft 0.118"Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
as req'd. |
£11.50 Ex VAT @ 20% |
|
|
Q15 | 129942 |
Washer, fitted between 1st gear and mainshaft 0.121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
as req'd. |
£12.07 Ex VAT @ 20% |
|
|
Q15A | 129943 |
Washer, fitted between 1st gear and mainshaft 0.124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.26 Ex VAT @ 20% |
|
|
Q15B | 129944 |
Washer, fitted between 1st gear and mainshaft 0.127"Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.36 Ex VAT @ 20% |
|
|
Q15C | 134670 |
Revington TR information: TR4-Early TR6 second speed thrust washer 0.132” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear... READ MORE |
as req'd. |
£11.96 Ex VAT @ 20% |
|
|
Q16 | 128102 |
Hub, synchro, 1st and 2ndThis item has been superceded by 153843 - see below |
1 | ||
|
153843 |
SYNCHRO HUB 1st & 2nd TR6Revington TR information: Not available new please consider second hand part 153843SH. |
1 | |||
|
Q17 | 122075 |
Spring Fitted in 1st and 2nd synchro hubRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
|
|
Q18 | BL0016 |
Ball Fitted in 1st and 2nd synchro hubThis item has been superceded by BLS108 - see below |
3 | ||
|
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
||
 |
Q19 | 113431 |
Cup, synchro,lst and 2nd gearRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
|
|
Q20 | 128103 |
Gear, reverse and operating sleeveThis item has been superceded by 153843 - see below |
1 | ||
|
153843 |
SYNCHRO HUB 1st & 2nd TR6Revington TR information: Not available new please consider second hand part 153843SH. |
1 | |||
|
Q21 | 105629 |
Gear, 2nd speedRevington TR information: 2nd Gear with 33 teeth used on all cars TR2-6 up to approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160” This gear has 3 oil holes from the bore... READ MORE |
1 |
£169.06 Ex VAT @ 20% |
|
|
Q22 | 129939 |
Bush, 2nd speed gear |
1 |
£75.86 Ex VAT @ 20% |
|
|
Q22A | 129941 |
Washer, fitted between 2nd gear and mainshaft 0.118'Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
as req'd. |
£11.50 Ex VAT @ 20% |
|
|
Q23 | 129942 |
Washer, fitted between 2nd gear and mainshaft 0.121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
as req'd. |
£12.07 Ex VAT @ 20% |
|
|
Q23A | 129943 |
Washer, fitted between 2nd gear and mainshaft 0.124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.26 Ex VAT @ 20% |
|
|
Q23B | 129944 |
Washer, fitted between 2nd gear and mainshaft 0.127'Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
as req'd. |
£14.36 Ex VAT @ 20% |
|
|
Q24 | 105630 |
Gear, 3rd speed |
1 |
£160.54 Ex VAT @ 20% |
|
|
Q25 | 129940 |
Bush, 3rd speed gear |
1 |
£49.69 Ex VAT @ 20% |
|
|
Q26 | 132220 |
Washer Retaining 3rd speed gear on mainshaft |
1 | ||
|
Q27 | 055707 |
Circlip Retaining 3rd speed gear on mainshaft |
1 |
£5.52 Ex VAT @ 20% |
|
|
Q28 | 062064 |
Sleevesynchro, 3rd and topRevington TR information: Not available new, use 062064SH. |
1 | ||
|
Q29 | 122075 |
Spring Fitted in 3rd and top synchro sleeveRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
|
|
Q30 | BL0016 |
Ball Fitted in 3rd and top synchro sleeveThis item has been superceded by BLS108 - see below |
3 | ||
|
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
||
|
Q31 | 113431 |
Cup, synchro, 3rd and topRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
|
|
Q32 | 113430 |
Sleeve, operating, 3rd and top |
1 | ||
|
Q33 | 204215 |
CONSTANT PINION SHAFTRevington TR information: Not avaialble new. Use 204214 or Consider 204215SH |
1 | ||
|
Q34 | 128933 |
Bearing, needle roller, pinion shaftTriumph Catalogue Remarks: Alternative to 117836 |
1 | ||
|
145008 |
CAGED NEEDLE BEARING TR5/6Revington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949 |
1 |
£25.78 Ex VAT @ 20% |
||
|
Q34 | 117836 |
Bearing, needle roller, pinion shaftTriumph Catalogue Remarks: Alternative to 128933 |
1 | ||
|
145008 |
CAGED NEEDLE BEARING TR5/6Revington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949 |
1 |
£25.78 Ex VAT @ 20% |
||
|
Q35 | 060658 |
Thrower, oil, constant pinion |
1 |
£2.27 Ex VAT @ 20% |
|
|
Q36 | 058391 |
Bearing, ballRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
|
Q37 | 058955 |
Circlip, locating, bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
|
|
Q38 | 058956 |
Circlip, retaining, bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
|
Q39 | 060078 |
Washer, bearing |
1 |
£1.10 Ex VAT @ 20% |
|
|
Q40 | 128105 |
COUNTERSHAFT |
1 |
£43.80 Ex VAT @ 20% |
|
|
Q41 | 128107 |
Gear, countershaft 1st and reverseRevington TR information: First and reverse gear countershaft. consider using our uprated version 128107UREX or 128107URNEW. 128107UR comes with bearings First gear has 16 teeth and is 53.4mm diameter. Fitted up to CC89816 Later cars used UKC662 post CC89817 which... READ MORE |
1 | ||
|
Q42 | 128108 |
Gear, countershaft 2nd speedThis item has been superceded by 140508 - see below |
1 | ||
|
140508 |
2ND SPEED GEAR TR5-6 |
1 |
£111.50 Ex VAT @ 20% |
||
|
Q43 | 105659 |
Gear, countershaft 3rd speed |
1 | ||
|
Q44 | 059456 |
Piece, distance, between 3rd and constant gears |
1 |
£24.25 Ex VAT @ 20% |
|
|
Q45 | 105626 |
Gear, constantRevington TR information: Not available new. Use 105626SH or 105626SR |
1 | ||
|
Q46 | 126862 |
Bearing, needleTriumph Catalogue Remarks: Fitted up to Gearbox No |
1 |
£16.82 Ex VAT @ 20% |
|
|
Q46A | 145301 |
Bearing, needleTriumph Catalogue Remarks: Fitted from Gearbox No and future |
1 | ||
|
150339 |
BEARING L/SHAFT CAGED ORIGINALRevington TR information: TR5 and TR6 open caged bearing For TR4 bearing see 126862 below. ForTR2and TR3 see 058088 below. |
1 |
£6.44 Ex VAT @ 20% |
||
|
Q47 | 129955 |
Washer, thrust Front of countershaft |
1 |
£11.59 Ex VAT @ 20% |
|
|
Q48 | 129956 |
Washer, thrust Rear of countershaft |
1 |
£17.39 Ex VAT @ 20% |
|
|
Q49 | 129937 |
REVERSE SPINDLE |
1 |
£38.39 Ex VAT @ 20% |
|
|
Q50 | 128110 |
Wheel, reverse, assembly |
1 |
£151.31 Ex VAT @ 20% |
|
|
Q51 | 129862 |
Bush, reverse wheel |
1 |
£11.74 Ex VAT @ 20% |
|
|
Q52 | 129954 |
Screw, wedglok C/shah and reverse shaft |
1 |
£2.87 Ex VAT @ 20% |
|
|
Q53 | 129938 |
Plate, locking to gear box rear of C/shaft |
1 |
£8.47 Ex VAT @ 20% |
|
|
Q54 | 124894 |
REVERSE OPERATING LEVER ASSEMBLY |
1 | ||
|
Q55 | 106448 |
Pin, fulcrum, fitted in gear box |
1 | ||
|
Q56 | TN3209 |
Nut, nyloc Fulcrum pinThis item has been superceded by NY606121 - see below |
1 | ||
|
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
1 |
£0.79 Ex VAT @ 20% |
||
|
Q57 | WP0036 |
Washer, plain to gear boxThis item has been superceded by WP10610057 - see below |
1 | ||
|
WP10610057 |
WASHER PLAIN 3/8 X 5/8 X 0.057" |
1 |
£0.65 Ex VAT @ 20% |
