Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
GEARBOX PARTS
Revington TR keep most gearbox parts new under there original part numbers and the most popular second hand parts under the original number suffixed SH. So for gears, shafts, bearings etc. please choose category 'Engine, transmission and heating/cooling' and select he tab 'Browse Original Triumph Catalogue Plates' section of our catalogue to identify the original part numbers you need.
The parts listed below are mainly special parts that will help improve your gearbox.
Revington TR have a large selection of TR Gearboxes with and without overdrive available for purchase, for use as core units for rebuilding or as a sum of spares. Please enquire for further details.
| Part No. | Description and Comments | Price | Add to Cart | |
|---|---|---|---|---|
 |
RTR1003
|
GASKET SET GEARBOX TR2-6Revington TR information: TR2-6, 2.5PI etc. gasket set to allow the gearbox t be stripped and reassembled. further kits are available for the overdrive |
£10.21 Ex VAT @ 20% |
|
|
RTR1149
|
KIT LAYGEAR UPRATED TR4-6Revington TR information: TR3B-6 modified lay gear providing extra bearing for extra support in this vulnerable area, provided with bearings, clips and lay shaft. Please state gearbox number and number of teeth on the lay gear. New Laygear/Countershaft when... READ MORE |
£430.55 Ex VAT @ 20% |
|
 |
RTR1490
|
TR4-6 DOG/STRAIGHT CUT GEAR SETRevington TR information: This racing gear set by Quaife offers 'dog' engagement and straight cut gears. Definitely for racing only as they are VERY noisy, the set includes a non-overdrive mainshaft. The input shaft accepts a clutch plate with... READ MORE |
£5040.76 Ex VAT @ 20% |
|
|
RTR1325-2
|
KIT MAINSHAFT UPRATE KIT TR2-3BRevington TR information: Uprating bush kit for 3rd gear. This kit is only relevant to the 3 synchromesh gearbox, please for appropriate kits for later 4 synchromesh gearboxes where these have been fitted to TR2 to 3A... READ MORE |
£203.87 Ex VAT @ 20% |
|
|
RTR1325-4
|
KIT MAINSHAFT UPRATE KIT TR4-6ERevington TR information: Uprating kit for TR4-Early 6 gearbox. Replacing weak 2nd and 3rd gear bushes. This improvement set fits all gearboxes TR4 to early TR6 from commission number CT1(TR4) to CD21768(TR6). The kit replaces the weak 'Top Hat'... READ MORE |
£203.87 Ex VAT @ 20% |
|
|
RTR1325-6E
|
KIT MAINSHAFT UPRATE KIT TR6EARLYRevington TR information: Uprating kit for TR6 Early gearbox. CD21769 to CR/CT 25000. Replacing weak 1st 2nd and 3rd gear bushes. The kit replaces the weak 'Top Hat' bush, which was originally brass along with the 1st and 3rd... READ MORE |
£203.87 Ex VAT @ 20% |
|
|
RTR1325-6L
|
KIT MAINSHAFT UPRATE KIT TR6LATERevington TR information: Uprating kit for TR6 Late (mid 73) gearbox onwards. Replacing 1st 2nd and 3rd gear bushes. This improvement set fits later TR6 gearboxes mid 1973 onwards CR/CF12501 onwards. The kit replaces the standard 'Top Hat' for... READ MORE |
£203.87 Ex VAT @ 20% |
|
 |
155660 |
MAGNETIC DRAIN PLUGRevington TR information: Magnetic sump plug, catches all the iron filings as your engine slowly wears. Can be used in gearbox and axle too. Don't forget the fibre washer which is sometimes required. |
£17.81 Ex VAT @ 20% |
|
 |
RTR1302
|
GEAR LEVER CRANKED TR2-6Revington TR information: TR4-6 cranked gear lever placing the gear knob further back for a more comfortable gear change. Same shape as that in TR4 Works rally car. Modified from a standard Second hand TR4-6 part and exchange for... READ MORE |
£343.45 Ex VAT @ 20% |
|
|
RTR1021-A
|
GEAR LEVER TR2-3B screw in type 128mm o/a lengthRevington TR information: Gear lever straight, TR2-6 with a 3/8"UNF male 1" long thread at the base for assembly into a threaded gear change assembly. Chrome plated, suitable for all standard Type TR gearbox top covers as well... READ MORE |
£84.38 Ex VAT @ 20% |
|
|
RTR1021-B
|
GEAR LEVER TR4-6 cranked 185mm o/a Length screw typeRevington TR information: Gear lever cranked, TR2-6 with a 3/8"UNF male 1" long thread at the base for assembly into a threaded gear change assembly. Chrome plated, suitable for all standard Type TR gearbox top covers as well... READ MORE |
£108.43 Ex VAT @ 20% |
|
 |
RTR1266K
|
ROLLER THRUST KIT TR2-6Revington TR information: This simple kit consists of a pack of thrust bearings and special washers that allow the stag concept to be incorporated into a TR gearbox using a standard TR layshaft (very slightly smaller than a Stag... READ MORE |
£90.00 Ex VAT @ 20% |
|
 |
RTR1266-1K
|
ROLLER THRUST KIT TR2-6 LARGE TOP HATRevington TR information: This kit consists of a pack of thrust bearings and washers modified in design concept such that when fitted to a TR gearbox it will more reliably transmit the highest TR power and torque, still using... READ MORE |
£322.57 Ex VAT @ 20% |
|
 |
RTR1266-2K
|
STAG ROLLER THRUST KIT LRGE SHFTRevington TR information: This kit consists of a pack of thrust bearings and washers to the standard Stag specification requiring a Stag layshaft (slightly larger than the TR part) to be used. Please be aware, this pack is a... READ MORE |
£123.54 Ex VAT @ 20% |
