Choose Car Type


then
Search for parts
or
Browse
for parts

DIFF PINION THRUST 0.048 INCH

Part No:
056793

Thrust Washer 0.048" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm.

A selection of various thicknesses of cupped washer are available from which suitable sizes can be selected as required to give zero backlash
The Differential fitted to TR2 8, Dolomite 2.5PI etc. use a common arrangement of thrust washers in conjunction with pinion gears (100823 or 153385). A complete range of thicknesses is shown below allowing excessive wear to be eliminated by use of one or a combination of thrust washers.
138440 0.027 ' 139952 0.056
147249 0.030 139953 0.060"
138441 0.035" 139954 0.064"
148805 0.041" 160375 0.065-67"
056793 0.048 139955 0.068"
139951 0.052" 139956 0.072"
TR s TR2-3- with a Lockheed axle use pinion gear 100823


Engine, Transmission, wheels/Tyres and Heating/Cooling

To view the Triumph Catalogue Plates, please pick a car type