Choose Car Type


then
Search for parts
or
Browse for parts

Home  »  Fuel and braking systems  »  FRONT BRAKES  »  STANDARD TR3-TR6 CALIPERS  »  CALIPER TR6 LATE IMP RH CLIP SEALS

CALIPER TR6 LATE IMP RH CLIP SEALS

Part No:
311852EX
Deposit *
£50.00

NOT AVAILABLE This part is no longer available

* Deposit Required: A deposit is required for this part. This will be refunded in full or in part on receipt of exchange item, depending on the condition of the part received. Vat at the prevailing rate will be added to the deposit if applicable.

Calliper 16PB type RH, TR6 from CC29930 and CP26077 to TR6 CC81078 and CP76094. This type of caliper which uses ¼" pad retention pins, has imperial threads and later seals (retained with a spring

clip). This is an original unit rebuilt, consider also 4-pot caliper kit RTR4461PK. See below

Fuel and braking systems

14 plates in total

83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE E - 83 m.m. and 86 m.m. ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

83 m.m. and 86 m.m. ENGINE: 1-3/4" STROMBERG CARBURETTORS.

PLATE K - 83 m.m. and 86 m.m. ENGINE: 1-3/4" STROMBERG CARBURETTORS.

83 m.m. and 86 m.m. ENGINE: 1-3/4" SU CARBURETTORS.

PLATE KS - 83 m.m. and 86 m.m. ENGINE: 1-3/4" SU CARBURETTORS.

83 m.m. and 86 m.m. ENGINE: BREATHER DETAILS.

PLATE F - 83 m.m. and 86 m.m. ENGINE: BREATHER DETAILS.

83 m.m. and 86 m.m. ENGINE: AIR CLEANERS.

PLATE L - 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS.

ACCELERATOR PEDAL ASSEMBLY

PLATE AA - ACCELERATOR PEDAL ASSEMBLY

83 m.m. and 86 m.m. ENGINE: PETROL PUMP ASSEMBLY.

PLATE G - 83 m.m. and 86 m.m. ENGINE: PETROL PUMP ASSEMBLY.

CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET.

PLATE AB - CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET.

BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS.

PLATE AC - BRAKE UNIT: FRONT CALIPERS AND REAR DRUMS.

FRONT SUSPENSION AND FRONT HUBS.

PLATE S - FRONT SUSPENSION AND FRONT HUBS.

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE N - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

HYDRAULIC PIPES.

PLATE AD - HYDRAULIC PIPES.

HANDBRAKE: LEVER, CABLES, AND COVER ASSEMBLY.

PLATE Z - HANDBRAKE: LEVER, CABLES, AND COVER ASSEMBLY.

PETROL SYSTEM: PETROL PIPES, PETROL TANK AND SENDER UNIT.

PLATE AE - PETROL SYSTEM: PETROL PIPES, PETROL TANK AND SENDER UNIT.