- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
SCREW 5/16 X 3/4 INCH UNF
Part No:
HU0805
NOT AVAILABLE This part is no longer available
This part appears on the following Triumph Catalogue Plates
| Car Type | Plate | Plate Title | Plate No. | Triumph Part Description | No per Unit |
| TR2 | N | FRONT SUSPENSION AND FRONT HUBS. | N55 | Setscrew, bracket to chassis frame | 8 |
| TR2 | B | ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL. | B39A | Screw, set, cover to front engine plate From Engine No. 1 |
4 |
| TR2 | B | ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL. | B39B | Screw, set, cover to front engine plate From Engine No. _________ |
2 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31H | Screw, set, steady bracket to frame bracket From Comm. No. TS8637 |
1 |
| TR2 | V | BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. | V9 | Screw, cylinder assembly to back plate From Comm. No. TS1 to 13045 |
2 |
| TR2 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S17 | Screw, set, attachment plate to chassis frame | 2 |
| TR2 | P | REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING. | P35A | Screw, set, cover to casing From Comm. No. TS1 to Comm. No. TS13045 |
8 |
| TR2 | PS | REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING. | PS37 | Screw, set, cover to casing From Comm. No. TS13046 |
8 |
| TR3 | N | FRONT SUSPENSION AND FRONT HUBS. | N55 | Setscrew, bracket to chassis frame | 8 |
| TR3 | B | ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL. | B39A | Screw, set, cover to front engine plate From Engine No. 1 |
4 |
| TR3 | B | ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL. | B39B | Screw, set, cover to front engine plate From Engine No. _________ |
2 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31H | Screw, set, steady bracket to frame bracket From Comm. No. TS8637 |
1 |
| TR3 | V | BRAKE UNIT: FRONT AND REAR, LOCKHEED AND GIRLING. | V9 | Screw, cylinder assembly to back plate From Comm. No. TS1 to 13045 |
2 |
| TR3 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S17 | Screw, set, attachment plate to chassis frame | 2 |
| TR3 | P | REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING. | P35A | Screw, set, cover to casing From Comm. No. TS1 to Comm. No. TS13045 |
8 |
| TR3 | PS | REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING. | PS37 | Screw, set, cover to casing From Comm. No. TS13046 |
8 |
| TR4 | N | CHASSIS FRAME AND RADIATOR SKID SHIELD. | N33 | Screw, set Front extension bracket to chassis frame Fitted up to Commission No. CT5897 only |
8 |
| TR4 | N | CHASSIS FRAME AND RADIATOR SKID SHIELD. | N36 | Screw, set Intermediate extension bracket to chassis frame Fitted up to Commission No. CT5897 only |
8 |
| TR4 | A | ENGINE: CYLINDER BLOCK AND HEAD. | A48 | Screw, set Breather pipe to bracket | 1 |
| TR4 | B | ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL. | B45A | Screw, set timing cover to front engine plate | 2 |
| TR4 | AM | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM. | AM3 | Screw, set Hinge to door | 12 |
| TR4 | AM | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM. | AM3 | Screw, set Hinge to door | 12 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P66 | Setscrew Fulcrum brackets to chassis frame | 8 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P66 | Setscrew Fulcrum brackets to chassis frame | 8 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P87A | Screw, set Rebound rubber to chassis frame | 4 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P87A | Screw, set Rebound rubber to chassis frame | 4 |
| TR4 | U | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | U17 | Screw, set Attachment plate to frame bracket | 2 |
| TR4 | AW | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | AW25 | Bolt Support tubes to overiders | 2 |
| TR4 | AW | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | AW64 | Screw, set Tie rods to overiders | 2 |
| TR4 | R | REAR AXLE | R34 | Screw, set, cover to casing | 8 |
| TR4A | U | RIGID REAR AXLE. | U34 | Screw, set, cover to casing | 8 |
| TR4A | AU | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM. | AU3 | Screw, set Hinge to door | 12 |
| TR4A | AU | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM. | AU3 | Screw, set Hinge to door | 12 |
| TR4A | BD | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | BD58 | Screw, set Tie rods to overiders | 2 |
| TR250 | A | ENGINE: External | A45 | Screw, set - Oil pump to cylinder block | 23 |
| TR250 | A | ENGINE: External | A64 | Screw, set - Lifting eyes to cylinder block | 4 |
| TR250 | AU | BODY AND FITTINGS: Door Assembly | AU3 | Screw, set - Hinge to door | 12 |
| TR250 | AU | BODY AND FITTINGS: Door Assembly | AU3 | Screw, set - Hinge to door | 12 |
| TR250 | BC | BODY AND FITTINGS: Bumpers | BC58 | Screw, set - Tie rods to overriders | 2 |
| TR5 | A | ENGINE: ENGINE UNIT COMPLETE, GASKET SETS, CYLINDER BLOCK, FRONT AND REAR PLATES AND OIL PUMP | A49 | Screw, set Oil pump to cylinder block | 23 |
| TR5 | A | ENGINE: ENGINE UNIT COMPLETE, GASKET SETS, CYLINDER BLOCK, FRONT AND REAR PLATES AND OIL PUMP | A68 | Screw, set Lifting eyes to | 4 |
| TR5 | G | ENGINE: AIR MANIFLOLD AND AIR CLEANER ASSEMBLIES | G11 | Setscrew Air cleaner support bracket to radiator stay | 1 |
| TR5 | C | ENGINE: CRANK, PISTONS CONNECTING RODS AND CAMSHAFT | C75 | Screw, set Distributor to pedestal | 1 |
| TR5 | X | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT | X9B | Screw, set Pedal box to dash-R.H.S. only | 2 |
| TR5 | AV | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM | AV3 | Screw, set Hinge to door | 12 |
| TR5 | AV | BODY AND FITTINGS: DOORS, HINGES AND LOCKS, GLASS, REGULATOR AND TRIM | AV3 | Screw, set Hinge to door | 12 |
| TR5 | BD | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS | BD58 | Screw, set Tie rods to overriders | 2 |
| TR6CP | N | ENGINE (Petrol Injection Model): Block and Sump | N55 | SCREW, set - Oil sump to cylinder block | 23 |
| TR6CP | N | ENGINE (Petrol Injection Model): Block and Sump | N82 | SCREW, set - Lifting eyes to cylinder block | 4 |
| TR6CP | Q | ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel | Q75 | SCREW, set - Distributor to pedestal | 1 |
| TR6CP | U | ENGINE (Petrol Injection Model): Air Manifold and Cleaner | U12 | SETSCREW - Air cleaner support bracket t radiator stay | 1 |
| TR6CP | BM | BODY AND FITTINGS: Door Assembly | BM3 | SCREW, set - Hinge to door | 12 |
| TR6CP | BM | BODY AND FITTINGS: Door Assembly | BM3 | SCREW, set - Hinge to door | 12 |
| TR6CP | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM9C | SCREW, set - Pedal box to dash - R.H.S. only | 2 |
| TR6CC | A | ENGINE (Carburettor Model): Block and Sump | A50 | SCREW, set - Oil sump to cylinder block | 23 |
| TR6CC | A | ENGINE (Carburettor Model): Block and Sump | A77 | SCREW, set - Lifting eyes to cylinder block | 4 |
| TR6CC | BM | BODY AND FITTINGS: Door Assembly | BM3 | SCREW, set - Hinge to door | 12 |
| TR6CC | BM | BODY AND FITTINGS: Door Assembly | BM3 | SCREW, set - Hinge to door | 12 |
| TR6CC | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM9C | SCREW, set - Pedal box to dash - R.H.S. only | 2 |
| TR6CR | 20-45 | ENGINE (P.I. MODELS) | 20-45 | SCREW 5/16 UNF X 5/8 INCH | 1 |
| TR6CR | 20-53 | ENGINE (P.I. MODELS) | 20-53 | SCREW 5/16 UNF X 5/8 INCH | 1 |
| TR6CR | 20-53 | ENGINE (P.I. MODELS) | 20-53 | SCREW 5/16 UNF X 5/8 INCH | 1 |
| TR6CF | 20-07 | ENGINE (CARB MODELS) | 20-07 | SCREW 5/16 UNF X 5/8 INCH | 4 |
