Choose Car Type


then
Search for parts
or
Browse for parts

Home  »  Engine, Transmission, wheels/Tyres and Heating/Cooling  »  ENGINES and COMPONENTS  »  PISTONS AND 'PISTON AND LINER KITS', RINGS  »  PISTONS  »   4 CYLINDER TR2-4A  »  87-89mm PISTONS  »  FORGED PISTON 92mm TR2-4A etc.

FORGED PISTON 92mm TR2-4A etc.

RTR Upgrade
Part No:
RTR1221-92
Price
£465.89
Price Ex VAT @ 20%
£388.24

AVAILABLE This part is available to order

Only supplied in sets of 4 but priced per piston, this very high quality forged piston suits TR2, 3, 3A, 3B, 4, 4A and Italia as well as other similar engines in Morgan, Doretti etc. with standard length connecting rods

This piston is 92mm diameter and is supplied with rings, gudgeon pins and circlips. The pistons are made to special order with a 3 week lead time. Other sizes are available, please ask.
This piston cannot be used with a standard type liner over bored as the wall thickness is simply not large enough. A special liner is however available, order RTR1222-92,
Also special ½" and 3/4" shorter piston for use with longer connecting rods are also available, see below

Engine, Transmission, wheels/Tyres and Heating/Cooling

17 plates in total

ENGINE: CYLINDER BLOCK AND HEAD

PLATE A - ENGINE: CYLINDER BLOCK AND HEAD

ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

PLATE B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.

ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

PLATE D - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.

ENGINE: OIL FILTER ASSEMBLY.

PLATE F - ENGINE: OIL FILTER ASSEMBLY.

ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

PLATE C - ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated).

ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

PLATE H - ENGINE: WATER THERMOSTAT, WATER HOSES AND IGNITION (Not illustrated).

ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

PLATE JA - ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated).

CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

PLATE J - CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER.

GEARBOX: CASING, TOP COVER AND MOUNTING.

PLATE K - GEARBOX: CASING, TOP COVER AND MOUNTING.

GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

PLATE L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.

HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

PLATE AT - HIGH SPEED EQUIPMENT: GEARBOX AND OVERDRIVE, COMPETITION PARTS AND TONNEAU COVER Uprated Springs, Dampers and Brakes

OVERDRIVE UNIT DETAILS.

PLATE AW - OVERDRIVE UNIT DETAILS.

REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

PLATE P - REAR AXLE: EARLY 'LOCKHEED' TYPE 4 BOLT MOUNTING.

REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

PLATE PS - REAR AXLE: LATE 'GIRLING TYPE' 6 BOLT MOUNTING.

REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

PLATE Q - REAR SUSPENSION, PROPELLOR SHAFT AND ROAD WHEELS.

EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

PLATE X - EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS.

ACCESSORIES: HEATER KIT.

PLATE AU - ACCESSORIES: HEATER KIT.