Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR2 Plate B - ENGINE: CRANK, PISTONS, CONNECTING RODS AND FLYWHEEL.
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
B1 | 301815 |
CRANKSHAFTRevington TR information: Crankshaft Cross drilled type, from TS881E. This Crankshaft is rarely if ever available new. Consider second hand part 301815SH, 301815-1SH, 301815-2SH or a Steel billet Crankshaft RTR1214, RTR1215, RTR1469. Crankshaft plugs 301815P are available separately. See... READ MORE |
1 | |||
301815SH |
Second Hand CRANKSHAFT TR2-4A NO NDTRevington TR information: Second Hand Crankshaft Cross-drilled type, from TS881E (earlier type available too). Second hand crankshafts may well already have been ground undersize. The price quoted here is for crankshafts that measure -0.020" or more undersize (mains and... READ MORE |
1 |
£730.42 Ex VAT @ 20% |
|||
B2 | 108810 |
Bearing, mainThis item has been superceded by AEM3196STD - see below |
3 prs. | |||
AEM3196STD |
TR2-4A MAIN BEARING SET STANDARDRevington TR information: TR2-4A Main Bearing set std. Bi metal equivalent to Glacier AM, Alecular alloy on high strength steel. |
3 prs. |
£56.56 Ex VAT @ 20% |
|||
B3A | 112617 |
Washer, thrust, top, centre bearing, 004" oversizeThis item has been superceded by AEW2004005 - see below |
2 | |||
AEW2004005 |
TR2-4A THRUST WASHER 0.005" OVERSIZERevington TR information: TR2-4A Thrust Washer set of 4 pieces 0.005" oversize. |
2 |
£12.79 Ex VAT @ 20% |
|||
B4 | 045919 |
Washer, thrust, bottom, centre bearingThis item has been superceded by AEW2004STD - see below |
2 | |||
AEW2004STD |
TR2-4A THRUST WASHER STANDARDRevington TR information: TR2-4A Thrust Washer set std. if single uppers are required, order 045918. |
2 |
£12.79 Ex VAT @ 20% |
|||
B4A | 112618 |
Washer, thrust, bottom, centre bearing, 004" oversizeThis item has been superceded by AEW2004005 - see below |
2 | |||
AEW2004005 |
TR2-4A THRUST WASHER 0.005" OVERSIZERevington TR information: TR2-4A Thrust Washer set of 4 pieces 0.005" oversize. |
2 |
£12.79 Ex VAT @ 20% |
|||
B5 | 056522 |
Shim, chain wheel location, 004" |
A/R |
£7.01 Ex VAT @ 20% |
||
B5A | 056523 |
Shim, chain wheel location, 006" |
A/R |
£1.67 Ex VAT @ 20% |
||
B6 | 055971 |
Wheel, chain (Duplex)Revington TR information: Consider second hand part 055971SH. |
1 |
£36.58 Ex VAT @ 20% |
||
055971SH |
Second Hand GEAR CRANKSHAFT |
1 |
£33.67 Ex VAT @ 20% |
|||
B7 | 057196 |
Deflector, oilRevington TR information: Consider second hand part 057196SH. We have been asked several times which way this is fitted. The thrower is very slightly curved. It fits with the base of the thrower at the back ... READ MORE |
1 |
£9.55 Ex VAT @ 20% |
||
057196SH |
OIL THROWER SECOND HAND |
1 |
£5.90 Ex VAT @ 20% |
|||
B8 | 107250 |
Hub, fan pulleyRevington TR information: This Hub is common to the TR2-4A engine, has the crankshaft front oil seal running on it coup;es the fan extension and fan belt pulley to the crankshaft. Consider also second hand part 107250SH ... READ MORE |
1 |
£102.37 Ex VAT @ 20% |
||
107250SH |
Second Hand HUB FAN PULLEY TR2-4A |
1 |
£50.23 Ex VAT @ 20% |
|||
B9 | KW0624 |
Key, hub, deflector and chain wheel to crankshaftThis item has been superceded by WKN606 - see below |
2 | |||
WKN606 |
WOODRUFF KEY-CRANK- |
2 |
£3.04 Ex VAT @ 20% |
|||
B10 | 110023 |
Pulley, rear halfRevington TR information: TR2-4A Engine fan belt pulley, rear half. Not currently available, consider original second hand part 110023SH or our aluminium replacement which forms part of our thin belt conversion. RTR1208K |
1 | |||
110023SH |
Second Hand PULLY REAR HALF |
1 |
£22.98 Ex VAT @ 20% |
|||
B11 | 107252 |
Pulley, front halfRevington TR information: TR2-4A Engine fan belt pulley, front half. Not currently available, consider original second hand part or our aluminium replacement which forms part of our thin belt conversion. RTR1208K |
1 | |||
107252SH |
Second Hand PULLEY FRONT HALF |
1 |
£45.92 Ex VAT @ 20% |
|||
B12 | 108493 |
Extension, fan hubRevington TR information: Consider original second hand part 108493SH Various engine fan arrangements were used from TR2-TR4A which broadly fall into two categories, with the TR4A having a third option for plastic fans. The engine in a TR4-4A is... READ MORE |
1 |
£54.96 Ex VAT @ 20% |
||
108493SH |
Second Hand FAN HUB EXT'N TR2-3ARevington TR information: 95mm long Various engine fan arrangements were used from TR2-TR4A which broadly fall into two categories, with the TR4A having a third option for plastic fans. The engine in a TR4-4A is further away from the... READ MORE |
1 |
£40.82 Ex VAT @ 20% |
|||
B12A | 109370 |
Piece, balanceThis item has been superceded by 107858 - see below |
A/R | |||
107858 |
Piece, balance |
A/R |
£17.26 Ex VAT @ 20% |
|||
B13 | HB0711 |
Bolt, fan pulley, extension and balance piece to hubThis item has been superceded by BH604111 - see below |
6 | |||
BH604111 |
BOLT 1/4 UNF X 1-3/8" |
6 |
£1.02 Ex VAT @ 20% |
|||
B14 | TN3207 |
Nut, nyloc, securing boltThis item has been superceded by NY604101 - see below |
6 | |||
NY604101 |
NUT NYLOC 1/4 UNF X 5/16 |
6 |
£0.56 Ex VAT @ 20% |
|||
B14A | WP0127 |
Washer, plain, under nutThis item has been superceded by WP127 - see below |
6 | |||
WP127 |
WASHER 1/4"x9/16" |
6 |
£0.73 Ex VAT @ 20% |
|||
B15 | 108498 |
Bolt, securing extension and fan pulley hub to crankshaftRevington TR information: Use original second hand part number 108498SH Various engine fan arrangements were used from TR2-TR4A which broadly fall into two categories, with the TR4A having a third option for plastic fans. The engine in a TR4-4A... READ MORE |
1 | |||
108498SH |
Second Hand CRANK BOLT TR2-3B for starting handleRevington TR information: 140mm long Various engine fan arrangements were used from TR2-TR4A which broadly fall into two categories, with the TR4A having a third option for plastic fans. The engine in a TR4-4A is further away from the... READ MORE |
1 |
£34.92 Ex VAT @ 20% |
|||
B15A | 108494 |
Shim, on boltRevington TR information: This item has a secondhand part available - see below |
A/R |
£1.36 Ex VAT @ 20% |
||
108494SH |
SHIM FOR CRANK BOLT TR2-4A |
A/R |
£2.32 Ex VAT @ 20% |
|||
B16 | 108497 |
Washer, locking boltRevington TR information: This item has a secondhand part available - see below |
1 |
£10.78 Ex VAT @ 20% |
||
108497SH |
LOCK WASHER CRANK |
1 |
£5.28 Ex VAT @ 20% |
|||
B17 | 047246 |
Bush, constant pinion pilot, In rear end of shaftRevington TR information: Size is approx 1"x 1" fitted in the crankshaft The image shows the difference between the 2 bushes |
1 | |||
B18 | 202025 |
FAN ASSEMBLYRevington TR information: Consider using second hand part 202025SH. Note that this part number is shown in the TR4 parts book incorrectly. The correct part number for TR4 is 209792, which was corrected by Triumph at amendment number 11.... READ MORE |
1 |
£166.87 Ex VAT @ 20% |
||
202025SH |
Second Hand 4 BLADE FAN TR2-3A |
1 |
£60.70 Ex VAT @ 20% |
|||
B19 | 108496 |
Bush, rubber, fitted in attachment holesRevington TR information: Rubber bush supporting the engine cooling fan on the crankshaft extension. 8 required per car. RevingtonTR prefer the SuperPro Polyurethane version offering improved stability and longevity. Please order kit part number SPF0275K. 'CLICK FOR MORE INFO'... READ MORE |
8 |
£1.10 Ex VAT @ 20% |
||
B20 | 108499 |
Sleeve, in rubber bushes |
4 |
£1.73 Ex VAT @ 20% |
||
B21 | 108495 |
Washer, plain, over outer rubber bushThis item has been superceded by WP10511075 - see below |
4 | |||
WP10511075 |
WASHER PLAIN 5/16" x 11/16" x 0.075"Revington TR information: TR4 late washer plain |
4 |
£0.16 Ex VAT @ 20% |
|||
B22 | 107858 |
Piece, balanceRevington TR information: This item has a secondhand part available - see below |
A/R |
£17.26 Ex VAT @ 20% |
||
107858SH |
BALANCE PIECE-FAN- SH |
A/R |
£5.40 Ex VAT @ 20% |
|||
B23 | HB0811 |
Bolt, securing balance piece and fanThis item has been superceded by BH605111 - see below |
4 | |||
BH605111 |
BOLT 5/16 UNF X 1-3/8 INCHRevington TR information: For dynamo mounting detail see plate M in the TR4A original parts book or web site. |
4 |
£1.08 Ex VAT @ 20% |
|||
B23A | WP0034 |
Washer, plain, on boltThis item has been superceded by WP10510075 - see below |
4 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
4 |
£0.44 Ex VAT @ 20% |
|||
B24 | 107857 |
Washer, tab, locking boltRevington TR information: The TR4 parts book shows 4 required. In fact only 2 are required. The TR2-3 and TR4A parts books are correct. |
2 |
£3.48 Ex VAT @ 20% |
||
B25 | 201475 |
FLYWHEEL ASSEMBLYTriumph Catalogue Remarks: From Engine No. _________ |
1 |
£497.38 Ex VAT @ 20% |
||
201475SH |
FLYWHEEL TR2-3ATriumph Catalogue Remarks: From Engine No. _________ |
1 |
£127.55 Ex VAT @ 20% |
|||
B25A | 115785 |
FLYWHEEL ASSEMBLYTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
115785SH |
Second Hand FLYWHEEL TR3A from TS50K and TR4Triumph Catalogue Remarks: From Engine No. _________ |
1 |
£140.29 Ex VAT @ 20% |
|||
B25B | 201454 |
Gear ringTriumph Catalogue Remarks: From Engine No. _________ |
1 |
£75.88 Ex VAT @ 20% |
||
B25C | 202834 |
Gear ringTriumph Catalogue Remarks: From Engine No. _________ |
1 |
£85.25 Ex VAT @ 20% |
||
B25D | 112030 |
Bolt Ring gear to flywheelTriumph Catalogue Remarks: From Engine No. _________ |
6 | |||
112653 |
BOLT |
6 |
£3.06 Ex VAT @ 20% |
|||
B25E | 115776 |
Washer, tab Ring gear to flywheelTriumph Catalogue Remarks: From Engine No. _________ |
6 |
£1.36 Ex VAT @ 20% |
||
B26 | 500045 |
Dowel, locating flywheel on crankshaftTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
1 |
£3.00 Ex VAT @ 20% |
|||
B26A | 127833 |
Dowel, locating flywheel on crankshaftTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
1 |
£3.00 Ex VAT @ 20% |
|||
B27 | 102065 |
Screw, set, flywheel attachmentThis item has been superceded by 138527 - see below |
4 | |||
138527 |
BOLT FLYWHEEL 5/8" AF headRevington TR information: This TR4A flywheel bolt does not require a tab washer when used on a steel flywheel. |
4 |
£4.66 Ex VAT @ 20% |
|||
B28 | 056524 |
Plate, locking screws |
2 |
£1.57 Ex VAT @ 20% |
||
B29 | 301466 |
CAMSHAFTTriumph Catalogue Remarks: Also available on exchange |
1 |
£586.76 Ex VAT @ 20% |
||
301466SH |
Second Hand CAMSHAFT USEABLE TR2-4Triumph Catalogue Remarks: Also available on exchange |
1 |
£190.06 Ex VAT @ 20% |
|||
B30 | 060214 |
Bearing, frontTriumph Catalogue Remarks: From Engine No. 1 |
1 |
£116.18 Ex VAT @ 20% |
||
060214SH |
Second Hand BEARING CAM FRONTTriumph Catalogue Remarks: From Engine No. 1 |
1 |
£34.93 Ex VAT @ 20% |
|||
B31 | 056384 |
Screw, set, front bearing to cylinder blockTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
056370 |
Screw, set, chain wheel to camshaft |
2 |
£3.80 Ex VAT @ 20% |
|||
B31A | WL0208 |
Washer, spring, on screwTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
B31B | 113522 |
Bearing, centre and rearTriumph Catalogue Remarks: From Engine No. 8997E |
2 | |||
AEC3027 |
TR3-4A CAM BEARING SETRevington TR information: TR3-4A Cam bearing set consisting of 2 off 113522 wide bearing and 1 off 113523 narrow bearing. TR2's did not have cam bearings but these engines can be converted to accept bearings 113522 is also available... READ MORE |
2 |
£38.15 Ex VAT @ 20% |
|||
B31C | 113523 |
Bearing, intermediateThis item has been superceded by AEC3027 - see below |
1 | |||
AEC3027 |
TR3-4A CAM BEARING SETRevington TR information: TR3-4A Cam bearing set consisting of 2 off 113522 wide bearing and 1 off 113523 narrow bearing. TR2's did not have cam bearings but these engines can be converted to accept bearings 113522 is also available... READ MORE |
1 |
£38.15 Ex VAT @ 20% |
|||
B31D | 110462 |
Screw, locating bearing in cylinder blockTriumph Catalogue Remarks: From Engine No. 8997E |
3 |
£4.38 Ex VAT @ 20% |
||
B31E | WP0107 |
Washer, plain, on screwTriumph Catalogue Remarks: From Engine No. 8997E |
3 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
3 |
£0.44 Ex VAT @ 20% |
|||
B32 | 057113 |
Wheel, chain (Duplex)Revington TR information: TR2-4A can chain sprocket attached to camshaft. Consider second hand part 057113SH |
1 |
£74.89 Ex VAT @ 20% |
||
057113SH |
Second Hand SPROCKET CAM |
1 |
£33.18 Ex VAT @ 20% |
|||
B33 | 056370 |
Screw, set, chain wheel to camshaft |
2 |
£3.80 Ex VAT @ 20% |
||
B34 | 056293 |
Plate, locking setscrews |
1 |
£1.58 Ex VAT @ 20% |
||
B35 | 057151 |
Chain, timing (Duplex) |
1 |
£20.30 Ex VAT @ 20% |
||
B36 | 056327 |
TIMING COVER ASSEMBLYThis item has been superceded by 203681 - see below |
1 | |||
056327SH |
Second Hand TIMING COVER TR2-4A |
1 |
£127.55 Ex VAT @ 20% |
|||
B37 | 104662 |
Seal, oil |
1 |
£9.84 Ex VAT @ 20% |
||
B38 | 056328 |
Washer, joint, cover to engine plateThis item has been superceded by 211122 - see below |
1 | |||
211122 |
TIMING COVER GASKET TR2-4Revington TR information: Gasket, Front cover to engine plate. |
1 |
£7.18 Ex VAT @ 20% |
|||
B38A | 056763 |
Support, timing coverRevington TR information: Consider original second hand part number 056763SH. . |
1 |
£9.31 Ex VAT @ 20% |
||
056763SH |
PEDESTAL STUD TIMING COVER TR2-4A SECOND HAND |
1 |
£7.66 Ex VAT @ 20% |
|||
B38B | WL0208 |
Washer, spring, on supportThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
B38C | 033085 |
Washer, fibre, on supportThis item has been superceded by WF10510056 - see below |
1 | |||
WF10510056 |
WASHER FIBRE 5/16 I/D X 5/8 OD |
1 |
£0.80 Ex VAT @ 20% |
|||
B38D | HN2008 |
Nut, cover to supportThis item has been superceded by NP605081 - see below |
1 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
|||
B38E | WL0208 |
Washer, spring, under nutThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
B39 | HU0857 |
Screw, set, cover to cylinder blockThis item has been superceded by SH505071 - see below |
7 | |||
SH505071 |
SCREW 5/16 UNC X 7/8 INCH |
7 |
£0.46 Ex VAT @ 20% |
|||
B39A | HU0805 |
Screw, set, cover to front engine plateTriumph Catalogue Remarks: From Engine No. 1 |
4 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
4 |
£1.39 Ex VAT @ 20% |
|||
B39B | HU0805 |
Screw, set, cover to front engine plateTriumph Catalogue Remarks: From Engine No. _________ |
2 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
2 |
£1.39 Ex VAT @ 20% |
|||
B39C | HU0811 |
Screw, set, cover to front engine plateTriumph Catalogue Remarks: From Engine No. _________ |
2 | |||
SH605111 |
SCREW 5/16 UNF X 1-3/8 INCH |
2 |
£2.46 Ex VAT @ 20% |
|||
B39D | HN2008 |
Nut, on setscrewThis item has been superceded by NP605081 - see below |
5 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
5 |
£0.17 Ex VAT @ 20% |
|||
B39E | WL0208 |
Washer, spring, on setscrewsThis item has been superceded by WS105090853 - see below |
12 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
12 |
£0.25 Ex VAT @ 20% |
|||
B40 | 043404 |
TIMING CHAIN TENSIONERRevington TR information: Tensioner Timing Chain TR2-4A Installation Tip:Timing chain tensioners can wear rapidly if not free to move. Check that the timing cover assembly part no. 203681 has no ridges inside, which could stop the tensioner moving freely,... READ MORE |
1 |
£6.90 Ex VAT @ 20% |
||
B41 | 058701 |
Pin, anchoring tensioner |
1 |
£6.22 Ex VAT @ 20% |
||
B42 | WP0018X |
Washer, on pinThis item has been superceded by WP104080571 - see below |
A/R | |||
WP104080571 |
WASHER PLAIN 9/32" x 1/2" x 0.057" |
A/R |
£0.70 Ex VAT @ 20% |
|||
B43 | PC0005 |
Pin, split, retaining tensioner on pinThis item has been superceded by PS104121 - see below |
1 | |||
PS104121 |
SPLIT PIN 1/16" x 1-1/2" long |
1 |
£0.35 Ex VAT @ 20% |
|||
B44 | 201782 |
CONNECTING ROD ASSEMBLY (Less Bearing)This item has been superceded by 211044 - see below |
4 | |||
211044 |
CON ROD TR2-4ARevington TR information: Connecting Rod forged from 42CrMo4 material suitable for TR2, 3, 3A, 3B 4 and 4A. We can also supply H beam type competition connecting rods as well as second hand original rods under part number 211044SH.... READ MORE |
4 |
£226.42 Ex VAT @ 20% |
|||
B45 | 056251 |
Bush, small endThis item has been superceded by C17164 - see below |
4 | |||
C17164 |
SMALL END BUSH TR2-4A |
4 |
£14.17 Ex VAT @ 20% |
|||
B46 | 106771 |
Dowel, hollow, connecting rod bolt |
4 | |||
B47 | 105312 |
Bolt, connecting rod attachment |
8 |
£18.40 Ex VAT @ 20% |
||
B48 | 105313 |
Washer, tab, locking bolt |
4 |
£1.62 Ex VAT @ 20% |
||
B49 | 107676 |
Bearing, big endTriumph Catalogue Remarks: From Engine No. 1 |
4 prs. | |||
AEB4331STD |
TR2-4A BIG END BEARING STANDARDRevington TR information: TR2-4A Big End Bearing set standard. |
4 prs. |
£92.58 Ex VAT @ 20% |
|||
B49A | 113381 |
Bearing, big end (Part No 117590 may be used for replacement purposes)Triumph Catalogue Remarks: From Engine No. 11427E |
4 prs. | |||
AEB4331STD |
TR2-4A BIG END BEARING STANDARDRevington TR information: TR2-4A Big End Bearing set standard. |
4 prs. |
£92.58 Ex VAT @ 20% |
|||
B50 | 107581 |
PISTON ASSEMBLY (Graded FGH)Triumph Catalogue Remarks: From Engine No. 1 |
4 | |||
B50A | 110516 |
PISTON ASSEMBLY (Graded FGH)Triumph Catalogue Remarks: From Engine No. 4883E |
4 | |||
B50B | 113560 |
PISTON ASSEMBLY (Graded FGH)Triumph Catalogue Remarks: From Engine No. 9731E |
4 | |||
B50C | 506691 |
PISTON ASSEMBLY (Graded FGH)Triumph Catalogue Remarks: From Engine No. 26698E |
4 | |||
B51 | 107582 |
Ring, compressionTriumph Catalogue Remarks: From Engine No. 1 |
8 | |||
B51A | 107582 |
Ring, compressionTriumph Catalogue Remarks: From Engine No. 9731E |
4 | |||
B51B | 113550 |
Ring, compression, taperedTriumph Catalogue Remarks: From Engine No. 9731E |
4 | |||
107582 |
Ring, compression |
4 | ||||
B52 | 107583 |
Ring, scraperTriumph Catalogue Remarks: From Engine No. 1 |
4 | |||
113549 |
Ring, scraper |
4 | ||||
B52A | 113549 |
Ring, scraperTriumph Catalogue Remarks: From Engine No. 9731E |
4 | |||
B53 | 060254 |
Pin, gudgeon |
4 | |||
B54 | 045985 |
Circlip, pin retaining |
8 |
£2.74 Ex VAT @ 20% |
||
B55 | 106981 |
Gear, drivingRevington TR information: Consider second hand. . |
1 | |||
106981SH |
Second Hand DIST DRIVE GEAR TR2-4A |
1 |
£45.53 Ex VAT @ 20% |
|||
B56 | 058334 |
Pin (Mills) fitted in gearThis item has been superceded by 500975 - see below |
1 | |||
500975 |
MILLS PIN 1/8"x1" |
1 |
£1.63 Ex VAT @ 20% |
|||
B57 | 104966 |
Shaft, oil pump driveRevington TR information: This item has a secondhand part available - see below |
1 |
£101.99 Ex VAT @ 20% |
||
104966SH |
Second Hand OIL PUMP DRIVE SHAFT |
1 |
£63.77 Ex VAT @ 20% |
|||
B58 | KW0316 |
Key, gear to shaftThis item has been superceded by WKN304 - see below |
1 | |||
WKN304 |
WOODRUFF KEY |
1 |
£1.27 Ex VAT @ 20% |
|||
B59 | 201623 |
Pedestal, distributor, and rev counter housingRevington TR information: not available new , use second hand part 201623SH |
1 | |||
201623SH |
Second Hand DIST. PEDESTAL TR2-4A |
1 |
£149.53 Ex VAT @ 20% |
|||
B60 | 056407 |
Washer, joint, between pedestal and blockTriumph Catalogue Remarks: From Engine No. __________ |
A/R | |||
125251 |
Washer, joint, between pedestal and blockRevington TR information: TR2-4A |
A/R |
£1.14 Ex VAT @ 20% |
|||
B60A | 125251 |
Washer, joint, between pedestal and blockTriumph Catalogue Remarks: From Engine No. __________ |
A/R |
£1.14 Ex VAT @ 20% |
||
B61 | 106184 |
Gear, driven, rev counterRevington TR information: Not available new, consider second hand part 106184SH |
1 | |||
106184SH |
Second Hand TACHO DRIVE GEAR 4CYL |
1 |
£60.70 Ex VAT @ 20% |
|||
B61A | HN2008 |
Nut, securing pedestalThis item has been superceded by NP605081 - see below |
2 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
|||
B61B | WL0208 |
Washer, spring, under nutThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
B62 | 500004 |
Bearing, driven gearThis item has been superceded by 132472 - see below |
1 | |||
132472 |
BEARING TACHO DRIVE TR2-4ARevington TR information: Not available new, consider second hand part 132472SH |
1 | ||||
B63 | 056305 |
Screw, locking bearing in pedestalRevington TR information: This item has a secondhand part available - see below |
1 | |||
056305SH |
SCREW |
1 |
£7.01 Ex VAT @ 20% |
|||
B64 | WL0208 |
Washer, spring, on screwThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
B65 | 060247 |
Seal, oil, in bearing |
1 |
£6.00 Ex VAT @ 20% |
||
B66 | 060246 |
Screwed end, rev counter bearing |
1 |
£4.14 Ex VAT @ 20% |
||
B67 | 105280 |
Stud, distributor to pedestalThis item has been superceded by ST704071 - see below |
2 | |||
ST704071 |
STUD 1/4 x 1" UNF+ UNC |
2 |
£5.52 Ex VAT @ 20% |
|||
B67A | HN2007 |
Nut, on studThis item has been superceded by NP604071 - see below |
2 | |||
NP604071 |
NUT PLAIN 1/4 UNF X 7/32 |
2 |
£0.44 Ex VAT @ 20% |
|||
B67B | WL0207 |
Washer, spring, under nutThis item has been superceded by WS104070643 - see below |
2 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
2 |
£0.20 Ex VAT @ 20% |
|||
B67C | WP0042 |
Washer, plain, on studThis item has been superceded by WP10408035 - see below |
2 | |||
WP10408035 |
WASHER PLAIN 1/4" x 1/2" x 0.035" |
2 |
£0.62 Ex VAT @ 20% |