Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate A - ENGINE: External
Also in this listing
Complete Engine and External Assembly| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
A1AA | 516794 |
ENGINE UNIT 8.6-1 Ratio (Carburettor Model only) |
1 | ||
|
A1BB | 516794/R |
ENGINE UNIT 8.6-1 Ratio (Carburettor Model only) RECONDITIONED UNIT |
1 | ||
|
Note:-The above units are less water pump, distributor, dynamo, petrol pump, oil filter, thermostat, inlet and exhaust manifolds, carburettors and sparking plugs. |
|||||
|
A1CC | 517276 |
DECARBONISING GASKET SETRevington TR information: Head gasket set for flat top TR250 and 6 Engine Block (no recess) up to engine number CC75000. Also known as a Decarbonising Set The following head gasket and gasket set range fitted to TR250,... READ MORE |
1 |
£64.02 Ex VAT @ 20% |
|
|
A1DD | 517275 |
ENGINE GASKET SET |
1 | ||
|
A1 | 516800 |
CYLINDER BLOCK |
1 | ||
|
Cap, bearing - Front and intermediateTriumph Catalogue Remarks: Not serviced |
|||||
|
Cap, bearing - RearTriumph Catalogue Remarks: Not serviced |
|||||
|
A2 | HB1024 |
Bolt - Caps to block |
8 | ||
|
A3 | WL0210 |
Washer, lock - Caps to blockThis item has been superceded by WS107121203 - see below |
8 | ||
|
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
8 |
£0.42 Ex VAT @ 20% |
||
|
A4 | PS1103 |
Plug, core, oil gallery, front |
1 |
£4.03 Ex VAT @ 20% |
|
|
AS | 148353 |
Plug, core, rear of camshaft |
1 |
£1.60 Ex VAT @ 20% |
|
|
A6 | 144688 |
Plug, core, front face, R.H. side of block |
5 |
£2.20 Ex VAT @ 20% |
|
|
A7 | 144686 |
Plug, core, rear face, L.H. side of block |
3 |
£3.71 Ex VAT @ 20% |
|
|
A8 | 144687 |
Plug, core, front face of block |
1 |
£3.67 Ex VAT @ 20% |
|
|
A9 | 118632 |
Plug, dry seal, oil gallery, rearThis item has been superceded by 301815P - see below |
I | ||
|
301815P |
PLUG CRANK SHAFT TR3-4A & 5-6Revington TR information: TR3-4A Plug shaft in crank. 1/2" long with a hex key slot. |
I |
£2.58 Ex VAT @ 20% |
||
|
A10 | PU1404 |
Plug, oil gallery |
1 |
£7.18 Ex VAT @ 20% |
|
|
A11 | 118686 |
Plug, oil gallery |
5 |
£4.31 Ex VAT @ 20% |
|
|
A11A | 116511 |
Plug, oil gallery |
1 |
£6.49 Ex VAT @ 20% |
|
|
A12 | 143943 |
Adaptor, oil pressure gauge pipe |
1 |
£17.64 Ex VAT @ 20% |
|
|
A13 | 137978 |
Bush, oil pump drive shaftRevington TR information: This oil pump drive bush is fitted into the block of early TR5 models and all TR250. Late TR5's and all TR6 use bush part number 149776 which fits into a larger bore in the engine... READ MORE |
1 | ||
|
A14 | DP0514 |
Dowel, timing cover attachment |
2 | ||
|
A15 | DP0612 |
Dowel, engine plate to gearbox |
2 | ||
|
A16 | 146200 |
Stud, cylinder head attachmentThis item has been superceded by 156274 - see below |
14 | ||
|
156274 |
CYL HEAD STUDRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
14 |
£12.71 Ex VAT @ 20% |
||
|
A17 | 139836 |
Stud, gearbox and rear engine plate attachmentThis item has been superceded by ST605141 - see below |
3 | ||
|
ST605141 |
STUD 5/16 X 1-3/4" UNF+ UNF |
3 |
£3.46 Ex VAT @ 20% |
||
|
A18 | 100433 |
Stud, timing cover and engine plate attachmentThis item has been superceded by ST605092 - see below |
2 | ||
|
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
||
|
A19 | 101962 |
Stud, distributor pedestal attachmentThis item has been superceded by ST605101 - see below |
2 | ||
|
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
2 |
£3.04 Ex VAT @ 20% |
||
|
A20 | 100433 |
Stud, petrol pump attachmentThis item has been superceded by ST605092 - see below |
2 | ||
|
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
||
|
A21 | 104863 |
Block, sealing, frontThis item has been superceded by 151134 - see below |
I | ||
|
151134 |
SEALER BLOCK TR5-6Revington TR information: Sealing block to front engine plate TR250, 5 and 6. Also suitable for 6 cylinder saloon cars. This part is manufactured from aluminium and is prone to having the attachment screws pull the thread out of... READ MORE |
I |
£53.98 Ex VAT @ 20% |
||
|
A22 | 036234 |
Piece, filling - Sealing block to cylinder block |
2 |
£2.57 Ex VAT @ 20% |
|
|
A23 | 100501 |
Screw - Sealing block to cylinder blockThis item has been superceded by SW605081 - see below |
2 | ||
|
SW605081 |
SCREW(WAS 100501) |
2 |
£1.96 Ex VAT @ 20% |
||
|
A24 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
|
|
A25 | WFO511 |
Washer, fibre, water drain tapThis item has been superceded by ARH517 - see below |
A/R | ||
|
ARH517 |
FIBRE SEAL-DRAIN TAP |
A/R |
£1.26 Ex VAT @ 20% |
||
|
A26 | WF0525 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
A/R | ||
|
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
||
|
A27 | 145021 |
CYLINDER LINERThis item has been superceded by 158942 - see below |
6 | ||
|
158942 |
CYLINDER LINER |
6 |
£32.44 Ex VAT @ 20% |
||
|
A28 | 212622 |
REAR OIL SEAL HOUSINGRevington TR information: Not available new use 212622SH |
1 | ||
|
A29 | 143456 |
Seal, oil, crankshaft |
1 |
£6.25 Ex VAT @ 20% |
|
|
A30 | 105321 |
Washer, joint - Housing to cylinder block |
1 |
£0.98 Ex VAT @ 20% |
|
|
A31 | HB0809 |
Bolt - Housing to cylinder block |
7 | ||
|
A32 | WL0208 |
Washer, lock - Housing to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
||
|
OIL PRESSURE ADJUSTMENT DETAILSTriumph Catalogue Remarks: comprising parts A33-A36 |
|||||
|
A33 | 132107 |
Piston, relief valveRevington TR information: Piston. Oil pressure relive valve, TR250, 5, 6 and Triumph 2000 and 2.5PI etc. Original triumph parts were hardened to 40 Rockwell / 65 Vickers. There are many of these parts on the market that are... READ MORE |
1 |
£11.94 Ex VAT @ 20% |
|
|
A34 | 131535 |
Spring, relief valve piston |
1 |
£7.92 Ex VAT @ 20% |
|
|
A35 | 107246 |
Plug, relief valveRevington TR information: Consider second hand part 107246SH. |
1 |
£21.97 Ex VAT @ 20% |
|
|
A36 | 501258 |
Washer, relief valve plug |
1 | ||
|
A36A | 149634 |
OIL PUMP ASSEMBLYThis item has been superceded by 217488 - see below |
1 | ||
|
217488 |
OIL PUMP TR6/TR.2000Revington TR information: Consider original second hand part number 217488SH. . |
1 |
£124.97 Ex VAT @ 20% |
||
|
A37 | 127732 |
Body assembly, oil pumpThis item has been superceded by 217488 - see below |
1 | ||
|
217488 |
OIL PUMP TR6/TR.2000Revington TR information: Consider original second hand part number 217488SH. . |
1 |
£124.97 Ex VAT @ 20% |
||
|
A37A | 104963 |
Plug, core, oil pump bodyRevington TR information: No longer available |
1 | ||
|
A38 | 508975 |
Rotor and spindle, assembly |
1 | ||
|
A38A | 149621 |
Filter, oil pump |
1 |
£21.26 Ex VAT @ 20% |
|
|
A39 | 214842 |
Cover, oil pump body |
1 | ||
|
A40 | HB0724 |
Bolt - Oil pump to cylinder block |
3 | ||
|
A41 | WL0207 |
Washer, lock - Oil pump to cylinder blockThis item has been superceded by GHF331 - see below |
3 | ||
|
GHF331 |
[GHF331] |
3 |
£0.55 Ex VAT @ 20% |
||
|
A42 | 307836 |
OIL SUMP ASSEMBLY |
1 | ||
|
A43 | 114794 |
Plug, oil drainThis item has been superceded by 114774 - see below |
1 | ||
|
114774 |
PLUG DRAIN ENG/AXLE Square drive TR2-6Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
|
A44 | 211125 |
Gasket, between sump and blockThis item has been superceded by AJM515 - see below |
1 | ||
|
AJM515 |
GASKET SUMP TR 5, 250 & 6Revington TR information: Full bottom set is AJM214. |
1 |
£7.45 Ex VAT @ 20% |
||
|
A45 | HU0805 |
Screw, set - Oil pump to cylinder block |
23 | ||
|
A46 | WL0208 |
Washer, lock - Oil pump to cylinder blockThis item has been superceded by WS105090853 - see below |
23 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
23 |
£0.25 Ex VAT @ 20% |
||
|
A47 | 147712 |
DIPSTICK ASSEMBLYRevington TR information: not available new use Second Hand part 147712SH |
1 | ||
|
A48 | 032307 |
Washer, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
|
|
A49 | 127652 |
Tube, dipstickRevington TR information: Call for price and availability |
1 | ||
|
A50 | 213777 |
FRONT ENGINE PLATE |
1 | ||
|
A51 | 213658 |
Washer, joint, front engine plate |
1 | ||
|
A52 | HU0806 |
Screw, set - Front engine plate to cylinder block |
3 | ||
|
A53 | WL0208 |
Washer, lock - Front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
||
|
A54 | HU0807 |
Screw, set - Front engine plate and camshaft locating plate to cylinder block |
2 | ||
|
A55 | WL0208 |
Washer, lock - F ront engine plate and camshaft locating plate to cylinder blockThis item has been superceded by WS105090853 - see below |
2 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
||
|
A56 | HU0807 |
Screw, set - Timing cover and front engine plate to cylinder block |
5 | ||
|
A57 | WL0208 |
Washer, lock - Timing cover and front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
||
|
A58 | HN2008 |
Nut - Timing cover and front engine plate to cylinder block |
2 | ||
|
A58A | 145385 |
ENGINE MOUNTING BRACKET ASSY.Revington TR information: Our stock is genuine Stanpart. See also 145385SHand 145385SHPC |
2 |
£94.92 Ex VAT @ 20% |
|
|
A58B | HU0906 |
Screw, set - Mounting bracket to cylinder block |
8 | ||
|
A58C | WL0209 |
Washer, lock - Mounting bracket to cylinder blockThis item has been superceded by GHF333 - see below |
8 | ||
|
GHF333 |
[GHF333] |
8 |
£0.43 Ex VAT @ 20% |
||
|
A58D | 132669 |
Mounting, flexibleRevington TR information: For a competition part with a harder rubber infill, order part number UKC8330 These parts have a metric thread and are therefore supplied with the correct nuts. |
2 |
£22.98 Ex VAT @ 20% |
|
|
A58E | TN3209 |
Nut, nyloc - Flexible mounting to bracket |
4 | ||
|
A58F | WP0009 |
Washer, plain - Flexible mounting to bracketThis item has been superceded by GHF302 - see below |
4 | ||
|
GHF302 |
WASHER PLAIN 3/8 |
4 |
£1.39 Ex VAT @ 20% |
||
|
A58G | HB0909 |
Bolt - Flexible mounting to chassis frame |
4 | ||
|
A58H | YN2909 |
Nut, nyloc - Flexible mounting to chassis frameThis item has been superceded by NY606151 - see below |
4 | ||
|
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
||
|
A59 | 211505 |
REAR ENGINE PLATE |
1 | ||
|
A60 | HU0807 |
Screw, set - Rear engine plate to clyinder block |
7 | ||
|
A61 | WL0208 |
Washer, lock - Rear engine plate to clyinder blockThis item has been superceded by WS105090853 - see below |
7 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
||
|
ENGINE LIFTING EYES |
|||||
|
A62 | 123716 |
Eye, lifting, frontRevington TR information: No longer available consider 123716SH |
1 | ||
|
A63 | 145987 |
Eye, lifting, rearRevington TR information: This lifting eye fitted to TR250, 5 and 6 engines is no longer available new. Order second hand 145987SH |
1 | ||
|
A64 | HU0805 |
Screw, set - Lifting eyes to cylinder block |
4 | ||
|
A65 | WL0208 |
Washer, lock - Lifting eyes to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
||
|
A66 | 121398 |
OIL PRESSURE SWITCHThis item has been superceded by GPS117 - see below |
1 | ||
|
GPS117 |
OIL PRESSURE SWITCHRevington TR information: Oil pressure switch suitable for TR250, 5, 6-CC, CP and CR. CF TR6 uses GPS113 A high pressure switch is available for those who would prefer earlier warning of impending oil pressure failure. See RTR8353-1 below |
1 |
£11.70 Ex VAT @ 20% |
Also in this listing
Complete Engine and External Assembly