Home » Engine, Transmission, wheels/Tyres and Heating/Cooling

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR250 Plate B - ENGINE: Cylinder Head

> Open plate

> Open plate in new window

> Print Plate

Also in this listing

Assembly, Valves, Push Rods, Tappet, Rocker Shaft and Cover Assembly

> Close plate

> Open plate in new window

> Print Plate

Also in this listing

Assembly, Valves, Push Rods, Tappet, Rocker Shaft and Cover Assembly

Plate No.	Part No.	Description and Comments	No Per Unit	Price	Add to Cart
B1AA	516796 CLICK FOR MORE INFO	CYLINDER HEAD ASSEMBLY (8.6 to I Compression Ratio) (with valves and springs less studs) Revington TR information: Not available new, use RTR1181 Exchange exchange head.	1		No longer available
B1	516797 CLICK FOR MORE INFO	CYLINDER HEAD ASSEMBLY (8.6 to I Compression Ratio) (less valves, springs and studs) Revington TR information: Not available new, use RTR1181 Exchange exchange head.	1		No longer available
B2	058923 CLICK FOR MORE INFO	Guide, valve, inlet Revington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE	6	£1.84 Ex VAT @ 20% £1.53
B3	111869 CLICK FOR MORE INFO	Guide, valve, exhaust Revington TR information: Standard steel exhaust Valve Guide fitted to TR250, 5 and 6. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an outside diameter of 0.5025" (12.76mm). The guide is 2.25" long The... READ MORE	6	£5.28 Ex VAT @ 20% £4.40
B4	146497 CLICK FOR MORE INFO	Insert, valve seat - Exhaust	6	£9.31 Ex VAT @ 20% £7.76	Available to order
B5	146496 CLICK FOR MORE INFO	Insert, valve seat - Inlet	6		No longer available
B6	144648 CLICK FOR MORE INFO	Plug, core, bucket type, rear face of head	I	£2.29 Ex VAT @ 20% £1.91
B7	144686 CLICK FOR MORE INFO	Plug, core, in rear face of head	1	£3.71 Ex VAT @ 20% £3.09
B8	101022 CLICK FOR MORE INFO	Screw, set - Rocker oil feed This item has been superceded by SH605041 - see below	I
	SH605041 CLICK FOR MORE INFO	SCREW 5/16 UNF X 1/2 INCH	I	£0.76 Ex VAT @ 20% £0.63
B9	500469 CLICK FOR MORE INFO	Washer, copper - Rocker oil feed This item has been superceded by WC10508038 - see below	I
	WC10508038	WASHER COPPER 5/16 I/D X 1/2 O/D X 0.040"	I	£0.54 Ex VAT @ 20% £0.45
B10	132495 CLICK FOR MORE INFO	Stud, rocker pedestal This item has been superceded by ST606241 - see below	6
	ST606241	STUD 3/8 X 3" UNF+ UNF	6	£5.21 Ex VAT @ 20% £4.34
B11	105123 CLICK FOR MORE INFO	Stud, rocker cover This item has been superceded by ST605331 - see below	3
	ST605331	STUD 5/16 X 4-1/8" UNF+ UNF	3	£6.41 Ex VAT @ 20% £5.34
B12	HN2008 CLICK FOR MORE INFO	Nut, securing stud to cylinder head This item has been superceded by NP605081 - see below	3
	NP605081	NUT PLAIN 5/16 UNF	3	£0.17 Ex VAT @ 20% £0.14
B13	148435 CLICK FOR MORE INFO	Adaptor, water valve to cylinder head, when heater is fitted Revington TR information: Straight adaptor, cylinder head to heater valve, This adaptor is 81mm long, When attempting to remove an old heater valve from this adaptor you often find the alloy valve body cracks and the remains stick inside... READ MORE	1	£16.38 Ex VAT @ 20% £13.65
B14	114774 CLICK FOR MORE INFO	Plug, replacing adaptor, when heater is not fitted Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE	1	£5.87 Ex VAT @ 20% £4.89	Available to order
B15	213776 CLICK FOR MORE INFO	Gasket, cylinder head This item has been superceded by AJM346 - see below	I
	AJM346 CLICK FOR MORE INFO	GASKET CYL HEAD TR5-6 PRE comm. no. CP75000 Revington TR information: Head gasket for flat top TR250, 5 and 6 Engine Block up to engine number CC/CP75000 (no recess). The following head gasket and gasket set range fitted to TR250, 5 and 6 Up to engine numbers... READ MORE	I	£46.02 Ex VAT @ 20% £38.35
B16	D53113	Dowel, Inlet manifold attachment	2		No longer available
B17	105124 CLICK FOR MORE INFO	Stud, exhaust manifold, outer This item has been superceded by ST606111 - see below	4
	ST606111	STUD 3/8 X 1-3/8" UNF+ UNF	4	£1.55 Ex VAT @ 20% £1.29
B18	105125 CLICK FOR MORE INFO	Stud, inlet manifold This item has been superceded by ST606141 - see below	6
	ST606141	STUD 3/8 X 1-3/4" UNF+ UNF	6	£1.96 Ex VAT @ 20% £1.63
B19	103810 CLICK FOR MORE INFO	Nut - Securing cylinder head Revington TR information: TR250, 5 and 6 standard nut. 7/16"UNF 11/16" AF. For high compression engines use our deeper nut part number NP607162	14	£4.73 Ex VAT @ 20% £3.94
B20	508289 CLICK FOR MORE INFO	Washer, plain - Securing cylinder head	14	£0.94 Ex VAT @ 20% £0.78	Available to order
		VALVES
B21	146128 CLICK FOR MORE INFO	Valve, inlet Revington TR information: head dia 36.51mm . RTR1129 is our stainless steel gas flowed version.	6	£13.28 Ex VAT @ 20% £11.07
B22	148386 CLICK FOR MORE INFO	Valve, exhaust Triumph Catalogue Remarks: Fitted up to Engine No. Only This item has been superceded by 149658 - see below	6
	149658 CLICK FOR MORE INFO	Valve, exhaust Revington TR information: head dia 32mm. RTR1130 is the Stainless Steel gas flowed version.	6	£17.04 Ex VAT @ 20% £14.20
B22A	149658 CLICK FOR MORE INFO	Valve, exhaust Triumph Catalogue Remarks: Fitted from Engine No. and future Revington TR information: head dia 32mm. RTR1130 is the Stainless Steel gas flowed version.	6	£17.04 Ex VAT @ 20% £14.20
B23	136487 CLICK FOR MORE INFO	Spring, valve Revington TR information: This valve spring is suitable for TR250 and Early TR6 carb up to engine number CC67893. Consider spring set RTR1174	12	£4.25 Ex VAT @ 20% £3.54	Available to order
B24	115118 CLICK FOR MORE INFO	Collar, spring (lower) Revington TR information: These valve spring collars are used only when single springs are used; that being TR250 and Early TR6 carb up to engine number CC67893 and TR6PI and carb engine number CC75000 to 75737 and CP75001 to... READ MORE	12		No longer available
B25	111870 CLICK FOR MORE INFO	Collar, spring (upper), inlet valve only Revington TR information: These inlet valve spring upper collars (caps) were used on all versions of TR250, TR5-TR6. RTR prefer to supply second hand part 111870SH or aluminium version RTR1180 which are guaranteed to be dimensionaly correct. See part... READ MORE	6	£5.17 Ex VAT @ 20% £4.31	Available to order
B26	128334 CLICK FOR MORE INFO	Collar, valve (top inner) - Exhaust valve only Revington TR information: These exhaust valve spring upper inner collars (caps) were used on all versions of TR250, TR5 and TR6. These collars are not available new; use second hand part 128334SH or inlet version 111870 or aluminium... READ MORE	6		No longer available
B27	128335 CLICK FOR MORE INFO	Collar, valve (top outer) - Exhaust valve only Revington TR information: These exhaust valve spring upper outer collars (caps) were used on all versions of TR250, TR5 and TR6. Consider second hand part 128335SH or inlet version 111870 or aluminium version RTR1180. See part number RTR1180 for... READ MORE	6	£4.14 Ex VAT @ 20% £3.45	Available to order
B28	106663 CLICK FOR MORE INFO	Cotter (split cone) Revington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half.	12 prs.	£4.03 Ex VAT @ 20% £3.36
B29	148916 CLICK FOR MORE INFO	PUSH ROD Revington TR information: Standard TR250, TR6carb and CRTR6 push rod. NOTE: Only two lengths of push rod were used in TR 6 cylinder engines although longer ones were used in saloon cars with lower compression. Part number 149513 is used in... READ MORE	12	£9.25 Ex VAT @ 20% £7.71	Available to order
B30	143552 CLICK FOR MORE INFO	TAPPET Revington TR information: Consider using our improved cam follower RTR1298.	12	£12.35 Ex VAT @ 20% £10.29
B31	214559 CLICK FOR MORE INFO	ROCKER SHAFT Revington TR information: This Rocker Shaft is to the original equipment standard. Consider RTR1187 which is the tuftrided version used for our exchange rocker shaft. Remember to install a plug 137811 at either end of the rocker shaft before... READ MORE	1	£100.78 Ex VAT @ 20% £83.98	Available to order
B32	145867 CLICK FOR MORE INFO	Pedestal, No. 1 Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE	1	£20.71 Ex VAT @ 20% £17.26
B33	145868 CLICK FOR MORE INFO	Pedestal, intermediate Revington TR information: Not available new use second hand part 145868SH. The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the... READ MORE	4		No longer available
B34	145869 CLICK FOR MORE INFO	Pedestal, No. 6 Revington TR information: The same aluminium rocker pedestals were used in all TR250, 5 and TR6 there being 3 types on one shaft. The number 1 end part number 145867, the intermediate, 2, 3, 4, and 5, part number... READ MORE	1	£30.60 Ex VAT @ 20% £25.50	Available to order
B35	104859 CLICK FOR MORE INFO	Screw, locating, shaft to drilled pedestal No. 6	1	£8.39 Ex VAT @ 20% £6.99
B36	HN2009 CLICK FOR MORE INFO	Nut - Rocker pedestal to cylinder head This item has been superceded by NP606111 - see below	6
	NP606111	NUT PLAIN 3/8 UNF X 11/32" (STD)	6	£0.14 Ex VAT @ 20% £0.12
B37	WP009 CLICK FOR MORE INFO	Washer, plain - Rocker pedestal to cylinder head This item has been superceded by WP106121191 - see below	6
	WP106121191	WASHER PLAIN 3/8" x 3/4" x 0.119" HARDENED	6	£1.48 Ex VAT @ 20% £1.23
B38	109023 CLICK FOR MORE INFO	Rocker, No. 1 This item has been superceded by 139897 - see below	6
	139897 CLICK FOR MORE INFO	ROCKER No.1 genuine BL TR260, 5, 6 Revington TR information: Rocker No1, 6 Cylinder, original Leyland Packaged. Our stock are genuine Leyland parts. Consider original second hand part number 139897SH All TR250, 5 and TR6 used the same Rocker Arms part number 109023 for number 1... READ MORE	6	£51.85 Ex VAT @ 20% £43.21	Available to order
B39	109024 CLICK FOR MORE INFO	Rocker, No. 2 This item has been superceded by 139896 - see below	6
	139896 CLICK FOR MORE INFO	ROCKER No.2 genuine BL TR250, 5, 6 Revington TR information: Rocker No2, 6 Cylinder, original Leyland Packaged. Our stock are genuine Leyland parts. Consider original second hand part number 139896SH All TR250, 5 and TR6 used the same Rocker Arms part number 109023 for number 1... READ MORE	6	£51.85 Ex VAT @ 20% £43.21
B40	057109 CLICK FOR MORE INFO	Screw, adjustment - Fitted in rockers This item has been superceded by 109495 - see below	12
	109495 CLICK FOR MORE INFO	ROCKER ADJ SCREW TR2-6 Revington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE	12	£7.02 Ex VAT @ 20% £5.85
B41	057110 CLICK FOR MORE INFO	Locknut - Fitted in rockers This item has been superceded by 51K1178 - see below	12
	51K1178 CLICK FOR MORE INFO	LOCKNUT ROCKER ADJ. Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE	12	£0.65 Ex VAT @ 20% £0.54
B42	105322 CLICK FOR MORE INFO	Spring, rocker, fitted to pedestals Nos. 1 and 6 This item has been superceded by WT10914 - see below	2
	WT10914	WASHER THACKERY 9/16 INCH	2	£0.70 Ex VAT @ 20% £0.58
B43	119313 CLICK FOR MORE INFO	Spring, rocker Revington TR information: Fitted to all 6 cylinder TR's	5	£2.66 Ex VAT @ 20% £2.22	Available to order
B44	WP8013 CLICK FOR MORE INFO	Washer, plain	4	£0.91 Ex VAT @ 20% £0.76
B45	137811 CLICK FOR MORE INFO	Plug, rocker shaft	2		No longer available
B46	P00010 CLICK FOR MORE INFO	Pin, cotter This item has been superceded by PS106071 - see below	1
	PS106071 CLICK FOR MORE INFO	PIN SPLIT 3/32" X 7/8"	1	£0.54 Ex VAT @ 20% £0.45
B47	213496 CLICK FOR MORE INFO	ROCKER COVER ASSEMBLY Revington TR information: Fitted to TR5 and TR250 and Carburettor TR6 up to Engine No. CC50,000 only Five different rocker covers were fitted to TR250, 5 and 6. The part numbers were:- 213496 Fitted up to Engine No. CC50,000... READ MORE	1		No longer available
B48	138176 CLICK FOR MORE INFO	Cap, oil filler This item has been superceded by GRC126 - see below	1
	GRC126	RAD CAP	1	£6.24 Ex VAT @ 20% £5.20	Available to order
B49	119322 CLICK FOR MORE INFO	Gasket, rocker cover This item has been superceded by AJM413 - see below	1
	AJM413	GASKET ROCKER COVER TR5-6	1	£5.87 Ex VAT @ 20% £4.89
B50	TN3208 CLICK FOR MORE INFO	Nut, nyloc - Rocker cover to cylinder head studs This item has been superceded by NY605111 - see below	3
	NY605111	NUT NYLOCK 5/16 UNF X 0.344" MEDIUM	3	£0.38 Ex VAT @ 20% £0.32
B51	WP0008 CLICK FOR MORE INFO	Washer, plain - Rocker cover to cylinder head studs This item has been superceded by WP10510075 - see below	3
	WP10510075	WASHER PLAIN 5/16" x 5/8" x 0.075"	3	£0.44 Ex VAT @ 20% £0.37
B52	WF0508 CLICK FOR MORE INFO	Washer, fibre - Rocker cover to cylinder head studs This item has been superceded by WF10510056 - see below	3
	WF10510056	WASHER FIBRE 5/16 I/D X 5/8 OD	3	£0.80 Ex VAT @ 20% £0.67

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR250 Plate B - ENGINE: Cylinder Head

Also in this listing

Also in this listing

516796

516797

058923

111869

146497

146496

144648

144686

101022

Screw, set - Rocker oil feed

SH605041

500469

Washer, copper - Rocker oil feed

WC10508038

132495

Stud, rocker pedestal

ST606241

105123

Stud, rocker cover

ST605331

HN2008

Nut, securing stud to cylinder head

NP605081

148435

114774

213776

Gasket, cylinder head

AJM346

D53113

Dowel, Inlet manifold attachment

105124

Stud, exhaust manifold, outer

ST606111

105125

Stud, inlet manifold

ST606141

103810

508289

VALVES

146128

148386

Valve, exhaust

149658

149658

136487

115118

111870

128334

128335

106663

148916

143552

214559

145867

145868

145869

104859

HN2009

Nut - Rocker pedestal to cylinder head

NP606111

WP009

Washer, plain - Rocker pedestal to cylinder head

WP106121191

109023

Rocker, No. 1

139897

109024

Rocker, No. 2

139896

057109

Screw, adjustment - Fitted in rockers

109495

057110

Locknut - Fitted in rockers

51K1178

105322