Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate BH - OVERDRIVE: Assembly
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
BH1AA | 307603 |
OVERDRIVE UNIT ASSEMBLYRevington TR information: Not available new. Please call or email for options |
1 | |||
BH1 | 112946 |
SolenoidThis item has been superceded by 508794 - see below |
1 | |||
508794 |
SOLENOID O/D A TYPE TR2-6Revington TR information: Occassionally this part is supplied with a lucar not a bullet connector. A change of connector maybe required. |
1 |
£52.48 Ex VAT @ 20% |
|||
BH1A | 513226 |
Screw, set - Securing solenoid to bracketThis item has been superceded by SH603041 - see below |
2 | |||
SH603041 |
SCREW 3/16 UNF x 1/2 INCH |
2 |
£0.71 Ex VAT @ 20% |
|||
BH1B | 513903 |
Washer, lock - Securing solenoid to bracketThis item has been superceded by WL105001 - see below |
2 | |||
WL105001 |
WASHER SPRING 5mm |
2 |
£2.74 Ex VAT @ 20% |
|||
BH2 | 109521 |
Cover, rubber, solenoidRevington TR information: Consider Second hand part 109521SH. |
1 | |||
BH3 | 208098 |
Plate, adaptor, overdrive unit to gearboxRevington TR information: consider second hand part 208098SH |
1 |
£175.64 Ex VAT @ 20% |
||
BH4 | 502556 |
Washer, joint, between adaptor plate and front casing assembly |
1 |
£2.46 Ex VAT @ 20% |
||
BH5 | 513889 |
Casing, front assembly |
1 | |||
BH6 | 500576 |
Stud, 2 5/8" - Adaptor plate attachment |
2 |
£4.18 Ex VAT @ 20% |
||
BH7 | 500666 |
Stud, 1" - Adaptor plate attachment |
1 |
£3.11 Ex VAT @ 20% |
||
BH8 | 500578 |
Stud, 11/4" - Adaptor plate attachmentThis item has been superceded by ST605101 - see below |
3 | |||
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
3 |
£3.04 Ex VAT @ 20% |
|||
BH9 | WL0208 |
Washer, lock - Adaptor plate attachmentThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
BH10 | HN2008 |
Nut - Adaptor plate attachmentThis item has been superceded by NP605081 - see below |
6 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
6 |
£0.17 Ex VAT @ 20% |
|||
BH11 | 500570 |
Plug, welch, in casingRevington TR information: No longer available |
1 | |||
BH12 | 513908 |
Shaft, valve operatingRevington TR information: O/D operating shaft - No Longer Available |
1 | |||
BH12A | 513909 |
Lever, setting, for shaft |
1 |
£12.12 Ex VAT @ 20% |
||
BH12B | 513910 |
Cam, on shaft |
1 | |||
BH12C | 513888 |
Dowel, spring lever to shaftRevington TR information: No longer available but consider DS1312 or 500975? |
1 |
£0.80 Ex VAT @ 20% |
||
BH12D | 500593 |
Pin, taper, cam to shaftRevington TR information: No longer available |
1 | |||
BH13 | 500594 |
Seal, oil, for shaft |
2 |
£1.56 Ex VAT @ 20% |
||
BH14 | 502567 |
Collar, for shaft |
1 |
£5.14 Ex VAT @ 20% |
||
BH15 | 502568 |
Lever, solenoidRevington TR information: Our current stock is unipart TR TYPE HAS HOOK TYPE END,SALOON TYPE HAS FORK END. |
1 |
£22.88 Ex VAT @ 20% |
||
BH16 | 503163 |
Bolt - Solenoid lever to shaftThis item has been superceded by SH604091 - see below |
1 | |||
SH604091 |
SCREW 1/4 UNF X 1-1/8 INCH |
1 |
£0.95 Ex VAT @ 20% |
|||
BH17 | 505550 |
Washer, plain - Solenoid lever to shaftThis item has been superceded by WP127 - see below |
1 | |||
WP127 |
WASHER 1/4"x9/16" |
1 |
£0.73 Ex VAT @ 20% |
|||
BH18 | 503164 |
Nut - Solenoid lever to shaft |
1 | |||
BH19 | 500658 |
Valve, operating |
1 |
£57.05 Ex VAT @ 20% |
||
BH20 | BL0020 |
Ball, steel, 5/16" - Operating valveThis item has been superceded by BLS110 - see below |
||||
BLS110 |
BALL BEARING 5/15" diameter |
£0.59 Ex VAT @ 20% |
||||
BH21 | 500591 |
Plunger - Operating valve |
1 |
£22.16 Ex VAT @ 20% |
||
BH22 | 506070 |
Spring - Operating valveThis item has been superceded by 007972 - see below |
1 | |||
007972 |
SPRING |
1 |
£6.56 Ex VAT @ 20% |
|||
BH23 | 506117 |
Plug - Operating valve |
1 |
£27.68 Ex VAT @ 20% |
||
BH24 | 500568 |
Washer, on plug - Operating valveThis item has been superceded by 3H693 - see below |
1 | |||
3H693 |
WASHER COPPER 1/2 INCH |
1 |
£1.10 Ex VAT @ 20% |
|||
BH25 | 500627 |
Cam, oil pump operatingRevington TR information: Consider second hand part 500627SH |
1 |
£73.60 Ex VAT @ 20% |
||
BH26 | 513891 |
Plunger assembly, oil pump |
1 |
£95.93 Ex VAT @ 20% |
||
BH27 | 500633 |
Spring - Pump plunger |
1 |
£11.87 Ex VAT @ 20% |
||
BH27A | 500581 |
Guide, peg - Pump plungerThis item has been superceded by 268112 - see below |
1 | |||
268112 |
GUIDE-PEG *NCA* |
1 | ||||
BH28 | 505507 |
Body, oil pump |
1 |
£143.90 Ex VAT @ 20% |
||
BH29 | 513902 |
Plug, in pump body |
1 |
£9.92 Ex VAT @ 20% |
||
BH30 | 513225 |
Screw, set - Pump to casingThis item has been superceded by UFS1194R - see below |
2 | |||
UFS1194R |
SCREW O/D SOLENOID |
2 |
£0.42 Ex VAT @ 20% |
|||
BH31 | 513903 |
Washer, spring - Pump to casingThis item has been superceded by WL105001 - see below |
2 | |||
WL105001 |
WASHER SPRING 5mm |
2 |
£2.74 Ex VAT @ 20% |
|||
BH32 | 506117 |
Plug - Oil pump valve |
1 |
£27.68 Ex VAT @ 20% |
||
BH33 | 500568 |
Washer - Oil pump valveThis item has been superceded by 3H693 - see below |
1 | |||
3H693 |
WASHER COPPER 1/2 INCH |
1 |
£1.10 Ex VAT @ 20% |
|||
BH34 | 506070 |
Spring - Oil pump valveThis item has been superceded by 007972 - see below |
1 | |||
007972 |
SPRING |
1 |
£6.56 Ex VAT @ 20% |
|||
BH35 | 500591 |
Plunger - Oil pump valve |
1 |
£22.16 Ex VAT @ 20% |
||
BH36 | BL0016 |
Ball, steel, 1/4" - Oil pump valveThis item has been superceded by BLS108 - see below |
1 | |||
BLS108 |
BALLBEARING 1/4 inch DIA |
1 |
£2.41 Ex VAT @ 20% |
|||
BH37 | 509884 |
Filter, oil |
1 | |||
BH38 | 513205 |
Magnet, oil filter |
1 |
£19.76 Ex VAT @ 20% |
||
BH39 | 513904 |
Plug, oil drainThis item has been superceded by 521814 - see below |
1 | |||
521814 |
DRAIN PLUG A TYPE C SPANNER TYPE |
1 |
£80.50 Ex VAT @ 20% |
|||
BH40 | 500641 |
Washer, drain plug |
1 |
£1.03 Ex VAT @ 20% |
||
BH41 | 515131 |
Spring, pressure, accumulator |
1 |
£33.12 Ex VAT @ 20% |
||
BH42 | 501909 |
Piston assembly, accumulator |
1 |
£113.35 Ex VAT @ 20% |
||
BH43 | 505555 |
Ring, piston |
Set |
£81.91 Ex VAT @ 20% |
||
BH44 | 501908 |
Housing assembly, accumulator |
1 |
£69.00 Ex VAT @ 20% |
||
BH45 | 501910 |
'O' ring |
1 |
£3.28 Ex VAT @ 20% |
||
BH46 | 502563 |
Spacing tube and washer assembly |
1 |
£33.05 Ex VAT @ 20% |
||
BH47 | 502566 |
Bracket assembly, solenoid |
1 |
£121.15 Ex VAT @ 20% |
||
BH48 | 500645 |
Washer, joint, side cover |
1 |
£1.03 Ex VAT @ 20% |
||
BH49 | 500577 |
Stud - Attaching solenoid bracket to front casingThis item has been superceded by ST605111 - see below |
2 | |||
ST605111 |
STUD 5/16 X 1 3/8 UNF+ UNF |
2 |
£2.39 Ex VAT @ 20% |
|||
BH50 | HN2008 |
Nut - Attaching solenoid bracket to front casingThis item has been superceded by NP605081 - see below |
2 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
|||
BH51 | WL0208 |
Washer, lock - Attaching solenoid bracket to front casingThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
BH52 | 103268 |
Screw, set - Attaching solenoid bracket to front casingThis item has been superceded by SH605141 - see below |
2 | |||
SH605141 |
SCREW 5/16 UNF X 1-3/4 INCH |
2 |
£1.31 Ex VAT @ 20% |
|||
BH53 | V11 P0008 |
Washer, plain - Attaching solenoid bracket to front casing |
2 | |||
BH54 | WL0208 |
Washer, lock - Attaching solenoid bracket to front casingThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
BH55 | 513918 |
Adjusting screw - SolenoidRevington TR information: No Longer Available |
1 | |||
BH56 | 513919 |
Adjusting screw - Nut, lock |
1 | |||
BH56A | 502560 |
Breather |
1 |
£11.62 Ex VAT @ 20% |
||
BH57 | 513890 |
Piston, operating, assembly |
2 |
£34.60 Ex VAT @ 20% |
||
BH58 | 513912 |
'0' ring |
2 |
£1.72 Ex VAT @ 20% |
||
BH59 | 500660 |
Ring, clutch thrust, assembly, with pins |
1 |
£167.90 Ex VAT @ 20% |
||
BH60 | 500587 |
Piece, bridge |
2 |
£17.64 Ex VAT @ 20% |
||
BH61 | 502554 |
Spring, clutch, setRevington TR information: Set of 8 overdirve springs Kit of 8 springs. Overall length 114mm. 4 springs are approx 2mm wire thickness and the other 4 springs 2.4mm wire thickness. Flat at either end. 31 turns. for... READ MORE |
Set |
£71.92 Ex VAT @ 20% |
||
BH62 | HN2007 |
Nut - Clutch thrust ring attachmentThis item has been superceded by NP604071 - see below |
4 | |||
NP604071 |
NUT PLAIN 1/4 UNF X 7/32 |
4 |
£0.44 Ex VAT @ 20% |
|||
BH63 | 500642 |
Washer, tab - Clutch thrust ring attachmentThis item has been superceded by NS604061 - see below |
4 | |||
NS604061 |
NUT 1/4 UNF PHILIDAS |
4 |
£1.55 Ex VAT @ 20% |
|||
BH64 | 500640 |
Bearing, ball, clutch thrust ringRevington TR information: Call for price and availability. |
1 |
£50.10 Ex VAT @ 20% |
||
BH65 | 500636 |
Circlip - Ball bearing location |
1 |
£2.41 Ex VAT @ 20% |
||
BH66 | 500637 |
Circlip - Ball bearing location |
1 |
£16.19 Ex VAT @ 20% |
||
BH67 | 502555 |
Ring, brake, clutch |
1 |
£206.44 Ex VAT @ 20% |
||
BH68 | 500661 |
Clutch assembly, sliding member, with liningsRevington TR information: Overdrive 'A' type cone clutch. Not available new use 500661EX, 500661SH or RTR1277. Press click 'MORE' for details |
1 | |||
BH69 | 500602 |
Annulus assemblyRevington TR information: Consider Exchange part RTR1104EX. press 'READ MORE' for more details |
1 | |||
BH70 | 505545 |
Carrier assembly, planetThis item has been superceded by 505545SH - see below |
1 | |||
505545SH |
CARRIER ASS PLANET G |
1 |
£175.28 Ex VAT @ 20% |
|||
BH70A | 513224 |
Bearing, planet carrierThis item has been superceded by 505546 - see below |
6 Sets | |||
505546 |
ROLLER BEARING ATYPE |
6 Sets | ||||
BH70B | 513914 |
Washer, thrustThis item has been superceded by 505546 - see below |
3 | |||
505546 |
ROLLER BEARING ATYPE |
3 | ||||
BH71 | 500611 |
Washer, thrustThis item has been superceded by 505548 - see below |
1 | |||
505548 |
THRUST WASHER |
1 |
£23.17 Ex VAT @ 20% |
|||
BH72 | 505549 |
Sunwheel assemblyRevington TR information: use 505549SH |
1 |
£206.48 Ex VAT @ 20% |
||
BH73A | 500588A |
Washer, adjusting, front of sunwheel - .113/.114" |
A/R |
£14.39 Ex VAT @ 20% |
||
BH73B | 500588B |
Washer, adjusting, front of sunwheel - .107/.108" |
A/R |
£14.39 Ex VAT @ 20% |
||
BH73C | 500588C |
Washer, adjusting, front of sunwheel - .101/.102" |
A/R |
£13.45 Ex VAT @ 20% |
||
BH73D | 500588D |
Washer, adjusting, front of sunwheel - .095/.096" |
A/R |
£13.45 Ex VAT @ 20% |
||
BH73E | 500588E |
Washer, adjusting, front of sunwheel - .089/.090" |
A/R |
£13.45 Ex VAT @ 20% |
||
BH73F | 500588E |
Washer, adjusting, front of sunwheel - .083/.084" |
A/R |
£13.45 Ex VAT @ 20% |
||
BH73G | 500588G |
Washer, adjusting, front of sunwheel - .077/.078" |
A/R |
£13.45 Ex VAT @ 20% |
||
BH74 | 500610 |
Washer, thrust, sunwheel |
1 |
£21.05 Ex VAT @ 20% |
||
BH75 | 502558 |
Clutch, uni-directional inner memberThis item has been superceded by BAU2061A - see below |
1 | |||
BAU2061A |
FREE WHEEL MEMBERRevington TR information: Overdrive Roller Clutch, also known as a sprag or uni-directional clutch, as it allows drive to take up only in one direction. This part is a later version and replaces parts 502558 502550 502559 500630. in... READ MORE |
1 |
£147.35 Ex VAT @ 20% |
|||
BH76 | 502550 |
Roller, setThis item has been superceded by 506063A - see below |
1 | |||
506063A |
ROLLER SET |
1 |
£11.84 Ex VAT @ 20% |
|||
BH77 | 502559 |
Cage, rollerRevington TR information: Use assembly BAU2061A |
1 | |||
BH78 | 500630 |
Spring, clutch |
1 | |||
BH79 | 500613 |
Washer, thrust, rear of uni-directional clutchThis item has been superceded by 500613A - see below |
1 | |||
500613A |
THRUST WASHER |
1 |
£21.84 Ex VAT @ 20% |
|||
BH80 | SP74G |
Bearing, ball, front, for annulus |
1 |
£33.52 Ex VAT @ 20% |
||
BH81 | 513897 |
Bearing, ball, rear, for annulusThis item has been superceded by SP75G - see below |
1 | |||
SP75G |
BEARING 4SYNC O/D RR ANNRevington TR information: Remove circlip when using in a Lockheed axle application. |
1 |
£18.70 Ex VAT @ 20% |
|||
BH82E | 500623/E |
Washer, adjusting annulus end - .146"This item has been superceded by 500623E - see below |
A/R | |||
500623E |
THRUST WASHER .146 |
A/R |
£14.39 Ex VAT @ 20% |
|||
BH82F | 500623/F |
Washer, adjusting annulus end - .151"This item has been superceded by 500623F - see below |
A/R | |||
500623F |
WASHER ADJ. 0.151 |
A/R |
£22.16 Ex VAT @ 20% |
|||
BH82G | 500623/G |
Washer, adjusting annulus end - .156"This item has been superceded by 500623G - see below |
A/R | |||
500623G |
O/D ADJ WASHER .156" |
A/R |
£12.07 Ex VAT @ 20% |
|||
BH82H | 500623/H |
Washer, adjusting annulus end - .161"This item has been superceded by 500623H - see below |
A/R | |||
500623H |
WASHER ADJ. 0.161 |
A/R |
£22.16 Ex VAT @ 20% |
|||
BH82I | 500623/I |
Washer, adjusting annulus end - .166" |
A/R | |||
BH83 | 500655 |
Casing, rear, with studsRevington TR information: Consider Exchange part RTR1105EX The speedometer drive exits this casing pointing downwards where as the saloon rear casing has the speedometer exit horizontally. For a rally car where it is intended that the speedometer cable should run... READ MORE |
1 |
£311.06 Ex VAT @ 20% |
||
BH84 | 500756 |
Stud - Rear casing attachmentThis item has been superceded by ST605121 - see below |
4 | |||
ST605121 |
STUD 5/16 X 1-1/2" UNF+ UNF |
4 |
£1.92 Ex VAT @ 20% |
|||
BH85 | 500579 |
Stud - Rear casing attachment |
2 | |||
BH86 | HN2008 |
Nut - Rear casing attachmentThis item has been superceded by NP605081 - see below |
6 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
6 |
£0.17 Ex VAT @ 20% |
|||
BH87 | WL0208 |
Washer, lock - Rear casing attachmentThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
BH88 | 513898 |
Seal, oil, in rear casingThis item has been superceded by 146129 - see below |
1 | |||
146129 |
OIL SEAL REAR GEAR BOX & A TYPE O/D |
1 |
£12.26 Ex VAT @ 20% |
|||
BH88A | 058948 |
Flange, mainshaft - Securing flange to mainshaftRevington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE |
1 | |||
BH88B | 057868 |
Nut, slotted - Securing flange to mainshaftRevington TR information: see also 057868SH |
1 |
£6.78 Ex VAT @ 20% |
||
BH88C | WP0024 |
Washer, plain - Securing flange to mainshaft |
1 |
£1.03 Ex VAT @ 20% |
||
BH88D | P00012 |
Pin, split - Securing flange to mainshaftThis item has been superceded by PS108091 - see below |
1 | |||
PS108091 |
PIN SPLIT 1/8 X 1-1/8 |
1 |
£0.26 Ex VAT @ 20% |
|||
BH88E | 506071 |
Screw, set - Securing speedometer drive bearing to casingThis item has been superceded by SH505051 - see below |
2 | |||
SH505051 |
SCREW 5/16 UNC 5/8" |
2 |
£0.59 Ex VAT @ 20% |
|||
BH88F | 506108 |
Washer, copper - Securing speedometer drive bearing to casingThis item has been superceded by WC10508038 - see below |
2 | |||
WC10508038 |
WASHER COPPER 5/16 I/D X 1/2 O/D X 0.040" |
2 | ||||
OVERDRIVE GEARBOX ASSEMBLY (Less gear lever)Triumph Catalogue Remarks: For details see Gearbox Section) |