Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate O - GEARBOX: External
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
O1AA | 516642 |
GEARBOX UNIT (Less Gear Lever)Revington TR information: TR6 CC/CP gearbox none overdrive new. No new gearboxes or overdrives are available however Revington TR provide a comprehensive rebuild and outright purchase scheme. Press 'Read More' for full details Revington TR offer... READ MORE |
1 | ||
|
O1BB | 516643 |
GEARBOX UNIT - Overdrive (Less Gear Lever and Gearbox Extension) |
1 | ||
|
O1CC | 515121 |
GEARBOX GASKET SETThis item has been superceded by RTR1003 - see below |
1 | ||
|
RTR1003
|
GASKET SET GEARBOX TR2-6Revington TR information: TR2-6, 2.5PI etc. gasket set to allow the gearbox t be stripped and reassembled. further kits are available for the overdrive |
1 |
£10.21 Ex VAT @ 20% |
||
|
O1 | 210622 |
GEARBOX AND CLUTCH HOUSING ASSEMBLYRevington TR information: TR4A-6 (all models) Bell Housing & Gear Case. Only two types of gear case were used on TR4-6. The TR4 being the first model used a gear casing (part number 304692) where the bell housing flange... READ MORE |
1 | ||
|
O2 | 137651 |
Bush, clutch housingRevington TR information: These bearings are narrow and give rise to excessive cross shaft wear. Consider using bronze bush RTR1204 that gives a larger support area |
2 |
£9.08 Ex VAT @ 20% |
|
|
O3 | 114774 |
Plug, drain, in bottom of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|
|
O4 | 100157 |
FRONT END COVERRevington TR information: TR2-6 Gearbox nose with 1.66" (42.61mm) diameter sliding section to accommodate standard 31.75mm (1.25") diameter input shaft and standard release carrier. Consider original second hand part number 100157SH or where necessary Triumph 2000/2500 gearbox Nose... READ MORE |
1 |
£63.24 Ex VAT @ 20% |
|
|
O5 | 141756 |
Seal, in front end coverRevington TR information: Gearbox nose seal TR2-6 and all similar gearboxes, T2000, T2500, Dolomite, Stage ,etc. Our seal stock is genuine Leyland new old stock, not cheap reproductions. |
1 |
£14.42 Ex VAT @ 20% |
|
|
O6 | 059537 |
Gasket - Front end cover to gearboxRevington TR information: Consider gasket kit RTR1003 |
1 |
£1.39 Ex VAT @ 20% |
|
|
O7 | 114034 |
Washer - Front end cover to gearboxThis item has been superceded by WC10510050 - see below |
4 | ||
|
WC10510050 |
WASHER COPPER 5/16 X 5/8 X .050 |
4 |
£1.30 Ex VAT @ 20% |
||
|
O8 | WU3857 |
Screw, wedglok - Front end cover to gearboxThis item has been superceded by 155542 - see below |
4 | ||
|
155542 |
WEDGLOK SCREW 5/16 |
4 |
£2.32 Ex VAT @ 20% |
||
|
O9 | 055773 |
Cover, countershaft end |
1 |
£10.01 Ex VAT @ 20% |
|
|
O10 | 055774 |
Gasket - Countershaft end cover to gearbox |
1 |
£1.80 Ex VAT @ 20% |
|
|
O11 | WU3857 |
Screw, set, wedglok - Countershaft end cover to gearboxThis item has been superceded by 155542 - see below |
2 | ||
|
155542 |
WEDGLOK SCREW 5/16 |
2 |
£2.32 Ex VAT @ 20% |
||
|
O12 | 114034 |
Washer, plain - Countershaft end cover to gearboxThis item has been superceded by WC10510050 - see below |
2 | ||
|
WC10510050 |
WASHER COPPER 5/16 X 5/8 X .050 |
2 |
£1.30 Ex VAT @ 20% |
||
|
O13 | 305048 |
GEARBOX EXTENSIONRevington TR information: Gearbox extension ( none overdrive. Not available new, use 305048SH |
1 | ||
|
O14 | 146129 |
Seal, oil, in rear of extension |
1 |
£12.26 Ex VAT @ 20% |
|
|
O15 | 132465 |
Washer, paper, extension to gearbox |
1 |
£2.42 Ex VAT @ 20% |
|
|
O16 | HU0858 |
Screw, set - Extension to gearboxThis item has been superceded by SH505081 - see below |
5 | ||
|
SH505081 |
SCREW 5/16 UNC X 1" |
5 |
£0.82 Ex VAT @ 20% |
||
|
O16A | HB0866 |
Bolt - Extension to gearboxThis item has been superceded by BH505161 - see below |
1 | ||
|
BH505161 |
BOLT 5/16 UNC X 2" |
1 |
£1.78 Ex VAT @ 20% |
||
|
O17 | WL0208 |
Washer, lock - Extension to gearboxThis item has been superceded by WS105090853 - see below |
6 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
||
|
O17A | 147964 |
SPEEDO DRIVEN GEAR AND BEARING ASSEMBLYRevington TR information: These two parts, the gear and the bearing housing were originally supplied as a pair. We also keep them separately. The correct number of gear teeth for an 'A' type TR is 15 TR2-4A Gearboxes without... READ MORE |
1 | ||
|
O18 | 147965 |
Gear, speedo drivenRevington TR information: This gear is plastic, usually red in colour and has 15 teeth. TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear... READ MORE |
1 |
£51.82 Ex VAT @ 20% |
|
|
O19 | 146540 |
Bearing, speedoThis item has been superceded by 146542 - see below |
1 | ||
|
146542 |
BEARING SPEEDO DRIVERevington TR information: Bearing assembly speedo drive. Consider bearing assembly 147964 or second hand part 146542SH TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear... READ MORE |
1 |
£40.26 Ex VAT @ 20% |
||
|
O20 | 108757 |
Seal, oil |
1 |
£2.32 Ex VAT @ 20% |
|
|
O21 | 147751 |
'0' ring |
1 |
£1.38 Ex VAT @ 20% |
|
|
O22 | 146541 |
WasherThis item has been superceded by 538532 - see below |
1 | ||
|
538532 |
WASHER 7/16" Copper |
1 |
£1.60 Ex VAT @ 20% |
||
|
O23 | 107746 |
Screw, locking - Bearing to Washer, lock extensionRevington TR information: Special Pinch Bolt holding the speedometer drive into the gearbox casing. Not available new. Use 107746SH or modify Screw SH505121 as described in 'More About This Part'. This special bolt has an overall length of... READ MORE |
1 | ||
|
O24 | WL0208 |
Washer, lock - Bearing to Washer, lock extensionThis item has been superceded by WS105090853 - see below |
1 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
||
|
O24A | 516648 |
TOP COVER ASSEMBLY - Normal |
1 | ||
|
O24B | 516649 |
TOP COVER ASSEMBLY - Overdrive |
1 | ||
|
O25 | 308238 |
Cover, top, complete with plugs |
1 | ||
|
O26 | 104449 |
Plug, interlock, side of top cover - Welch plugs |
1 |
£1.90 Ex VAT @ 20% |
|
|
O27 | 104449 |
Plug, selector shafts - Welch plugs |
3 |
£1.90 Ex VAT @ 20% |
|
|
O28 | 054505 |
Plug, sides of top cover - Welch plugs |
2 |
£2.39 Ex VAT @ 20% |
|
|
O29 | 114774 |
Plug, oil filler and levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|
|
O30 | 128066 |
Shaft, selector - 1st and 2ndRevington TR information: Consider second hand original part 128066SH |
1 |
£21.47 Ex VAT @ 20% |
|
|
O31 | 129986 |
Shaft, selector - 3rd and topThis item has been superceded by 156373 - see below |
1 | ||
|
156373 |
3/4 SELECT RODRevington TR information: No longer available use second hand part 156373SH |
1 |
£70.01 Ex VAT @ 20% |
||
|
O32 | 132389 |
Shaft, selector - reverseThis item has been superceded by 209902 - see below |
1 | ||
|
209902 |
SELECTOR SHAFT TR6Revington TR information: Our stock is genuine Stanpart |
1 | |||
|
O33 | 127386 |
Selector - 1st and 2ndRevington TR information: Selector 1st and 2nd. Not currently available new (July 2018) however we usually have second hand parts for sale |
1 | ||
 |
O34 | 127385 |
Selector - reverseRevington TR information: Selector reverse. When not available new, order second hand part 127385SH |
1 |
£75.88 Ex VAT @ 20% |
|
|
O35 | 128067 |
Fork, selector - 1st and 2ndRevington TR information: Fork Selector 1st and 2nd. Not available new however we usually have second hand parts for sale |
1 | ||
|
O36 | 127387 |
Fork, selector - 3rd and topRevington TR information: Not currently available. use second hand part 127387SH |
1 | ||
|
O37 | 129780 |
Actuator, reverse |
1 |
£15.19 Ex VAT @ 20% |
|
|
O38 | 129779 |
Sleeve, reverse shaftRevington TR information: Tube on reverse shaft 50.4mm long. Our stock is genuine Leyland Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft... READ MORE |
1 |
£2.29 Ex VAT @ 20% |
|
|
O39 | 128063 |
Sleeve, 1st and 2nd shaftRevington TR information: Tube on 1st and 2nd shaft 74.6mm long Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm long |
1 | ||
|
O40 | 117811 |
Sleeve, 3rd and top shaftRevington TR information: steel tube 3/4th speed change shaft TR4-6 gearbox top cover Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm... READ MORE |
1 |
£9.53 Ex VAT @ 20% |
|
|
O41 | 122653 |
Screw, taper, securing selectors and forks to shaft |
5 |
£7.14 Ex VAT @ 20% |
|
|
O42 | 106050 |
Ring, sealing, selector shaftThis item has been superceded by OR1008106 - see below |
3 | ||
|
OR1008106 |
'O' GEARBOX SEALING RING |
3 |
£0.95 Ex VAT @ 20% |
||
|
O43 | 106051 |
Plate, cover, over sealing ring |
1 |
£7.94 Ex VAT @ 20% |
|
|
O44 | HU0704 |
Screw, set - Cover plate to top coverThis item has been superceded by SH604041 - see below |
2 | ||
|
SH604041 |
SCREW 1/4 UNF X 1/2 INCH |
2 |
£0.58 Ex VAT @ 20% |
||
|
O45 | WL0207 |
Washer, lock - Cover plate to top coverThis item has been superceded by WS104070643 - see below |
2 | ||
|
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
2 |
£0.20 Ex VAT @ 20% |
||
|
O46 | 105788 |
Roller, interlock - Fitted in top cover |
1 |
£4.58 Ex VAT @ 20% |
|
|
O47 | BL0024 |
Ball, interlock - Fitted in top coverThis item has been superceded by BLS112 - see below |
2 | ||
|
BLS112 |
STEEL BALL-3/8 |
2 |
£0.59 Ex VAT @ 20% |
||
|
O48 | BL0024 |
Ball, selector shaft, 1st and 2nd gearThis item has been superceded by BLS112 - see below |
1 | ||
|
BLS112 |
STEEL BALL-3/8 |
1 |
£0.59 Ex VAT @ 20% |
||
|
O49 | 101236 |
Spring, ballThis item has been superceded by 155632 - see below |
1 | ||
|
155632 |
SPRING BALL G/BOX SELECTION TR6 |
1 |
£4.25 Ex VAT @ 20% |
||
|
O50 | 106481 |
Plunger, selector shaft, 3rd and top |
1 |
£17.56 Ex VAT @ 20% |
|
|
O51 | 106489 |
Spring, plunger |
1 |
£1.04 Ex VAT @ 20% |
|
|
O52 | 109401 |
Piece, distance, plungerRevington TR information: No longer available, use second hand part 109401SH |
1 | ||
|
O53 | 132388 |
Plunger, reverse selector |
1 | ||
|
O53A | 106489 |
Spring, reverse plunger |
1 |
£1.04 Ex VAT @ 20% |
|
|
O53B | 109401 |
Piece, distance, selector shaft plunger reverseRevington TR information: No longer available, use second hand part 109401SH |
1 | ||
|
O54 | 108166 |
Plug, retaining springRevington TR information: No longer available, we can however supply second hand parts 108166SH |
3 | ||
|
O55 | 105758 |
Washer, joint, top cover |
1 |
£1.73 Ex VAT @ 20% |
|
|
O56 | HB0873 |
Bolt - Top cover to casingThis item has been superceded by BH505241 - see below |
2 | ||
|
BH505241 |
BOLT 5/16 UNC X 3 INCH |
2 |
£2.28 Ex VAT @ 20% |
||
|
O57 | HB0871 |
Bolt - Top cover to casingThis item has been superceded by BH505161 - see below |
2 | ||
|
BH505161 |
BOLT 5/16 UNC X 2" |
2 |
£1.78 Ex VAT @ 20% |
||
|
O58 | 056370 |
Screw, set - Top cover to casing |
4 |
£3.80 Ex VAT @ 20% |
|
|
O59 | WL0208 |
Washer, lock - Top cover to casingThis item has been superceded by WS105090853 - see below |
8 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
||
|
O60 | 148095 |
CHANGE SPEED LEVER ASSEMBLYRevington TR information: Not available new, consider second hand part 148095SH. There are 4 basic types of gear lever fitted to TR2-6, which are all interchangeable, provided the correct top cover and fixings are used. TR2-3B Part number 112447.... READ MORE |
1 | ||
|
O61 | 112424 |
Plunger - In ball end |
1 |
£5.98 Ex VAT @ 20% |
|
|
O62 | 137988 |
Spring - In ball endThis item has been superceded by 106388 - see below |
1 | ||
|
106388 |
SYNCHRO/G/LEVER SPRING 3/8 |
1 |
£1.60 Ex VAT @ 20% |
||
|
O63 | 145796 |
Spring - Fitted under capRevington TR information: Spring gear lever, TR2-6CC/CP. Whilst this spring is unavailable, consider original second hand part number 145796SH. This spring had 6 coils and has an internal diameter of 16mm where the spring fits over the gear lever.... READ MORE |
1 | ||
|
O64 | 112442 |
Retainer, spring - Fitted under capRevington TR information: No longer vailable, use second hand part 112442SH |
1 | ||
|
O65 | 148870 |
Knob, gear lever |
I |
£70.80 Ex VAT @ 20% |
|
|
O66 | 506157 |
Nut, jam - for knobThis item has been superceded by NP505064 - see below |
1 | ||
|
NP505064 |
NUT PLAIN 5/16 UNC x 3/16" TALL STAINLESS STEELRevington TR information: Stainless Steel locking nut double champhered specifically intended for holding on gear lever knobs as it can be polished. |
1 |
£0.97 Ex VAT @ 20% |
||
|
O67 | 140816 |
Cap, change speed leverRevington TR information: Not available new use second hand part 140816SH. |
1 | ||
|
O68 | HU0703 |
Screw, set - Cap to top coverThis item has been superceded by SH604031 - see below |
1 | ||
|
SH604031 |
SCREW 1/4 UNF X 3/8 INCH |
1 |
£3.68 Ex VAT @ 20% |
||
|
O69 | WL0207 |
Washer, lock - Cap to top coverThis item has been superceded by WS104070643 - see below |
1 | ||
|
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
1 |
£0.20 Ex VAT @ 20% |
||
|
O70 | 141984 |
Pin, locating - Gear lever to top coverThis item has been superceded by 156408 - see below |
2 | ||
|
156408 |
GEAR LEVER RET. SHOULDER BOLTRevington TR information: pin gear lever location. Use with cap 156460 |
2 |
£2.12 Ex VAT @ 20% |
||
|
O71 | JN2108 |
Nut, jam - Gear lever to top coverThis item has been superceded by NP605061 - see below |
2 | ||
|
NP605061 |
NUT PLAIN 5/16 UNF X 3/16" |
2 |
£0.46 Ex VAT @ 20% |
||
|
GEARBOX GROMMET |
1 | ||||
 |
O71A | 709329 |
Grommet, lower - Gear leverRevington TR information: Upper grommet is linked below. |
£17.30 Ex VAT @ 20% |
||
|
O71B | 622381 |
Gauntlet, gear lever - Complete assembly (incorporating Part No. 709328 grommet upper)Triumph Catalogue Remarks: Black |
1 | ||
 |
631881 |
UPPER GEAR LEVER BOOT TR4A-TR6Revington TR information: This part is sold as a single assembly that includes the upper grommet 709328 and the leather cloth gauntlet. The gauntlet is available on its own in leather. The Lower grommet is 709329. in... READ MORE |
1 |
£31.54 Ex VAT @ 20% |
||
|
GEARBOX ATTACHMENT DETAILS |
|||||
|
O71C | HBO811 |
Bolt - Gearbox to engine attachmentThis item has been superceded by BH605111 - see below |
8 | ||
|
BH605111 |
BOLT 5/16 UNF X 1-3/8 INCHRevington TR information: For dynamo mounting detail see plate M in the TR4A original parts book or web site. |
8 |
£1.08 Ex VAT @ 20% |
||
|
O71D | WL0208 |
Washer, lock - Gearbox to engine attachmentThis item has been superceded by WS105090853 - see below |
8 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
||
|
O71E | HN2008 |
Nut - Gearbox to engine attachmentThis item has been superceded by NP605081 - see below |
8 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
8 |
£0.17 Ex VAT @ 20% |
||
|
O71F | HN2008 |
Nut - Gearbox to engine attachmentThis item has been superceded by NP605081 - see below |
3 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
3 |
£0.17 Ex VAT @ 20% |
||
|
O71G | WL0208 |
Washer, lock - Gearbox to engine attachmentThis item has been superceded by WS105090853 - see below |
3 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
||
|
O72 | 104086 |
REAR ENGINE MOUNTINGRevington TR information: This standard Mounting supporting the gearbox or overdrive is made with 55/60 shore hardness rubber. For competition or where significantly extra torque than standard is likely to be applied to the engine mountings use uprated part... READ MORE |
1 |
£21.62 Ex VAT @ 20% |
|
|
O73 | HB1112 |
Bolt - Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by SH608121 - see below |
2 | ||
|
SH608121 |
SCREW 1/2 UNF X 1-1/2" |
2 |
£1.69 Ex VAT @ 20% |
||
|
O74 | HN2011 |
Nut - Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by NP608141 - see below |
1 | ||
|
NP608141 |
NUT PLAIN 1/2 UNF X 7/16 THICK |
1 |
£0.47 Ex VAT @ 20% |
||
|
O75 | WL0211 |
Washer, lock - Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by WS108143133 - see below |
2 | ||
|
WS108143133 |
WASHER SPRING 1/2" RECT SECTION |
2 |
£0.16 Ex VAT @ 20% |
||
|
O76 | HN2010 |
Nut - Engine mounting Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by NP607121 - see below |
2 | ||
|
NP607121 |
NUT PLAIN 7/16UNF X 3/8" |
2 |
£0.26 Ex VAT @ 20% |
||
|
O77 | WL0210 |
Washer, lock - Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by WS107121203 - see below |
2 | ||
|
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
2 |
£0.42 Ex VAT @ 20% |
||
|
O78 | WP0010 |
Washer, plain - Engine mounting to gearbox extensionk to crossmemberThis item has been superceded by WP10716056 - see below |
2 | ||
|
WP10716056 |
WASHER 7/16"x 1"x 0.56 |
2 |
£0.54 Ex VAT @ 20% |
