Home » Engine, Transmission, wheels/Tyres and Heating/Cooling

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR250 Plate P - GEARBOX: Internal

> Open plate

> Open plate in new window

> Print Plate

> Close plate

> Open plate in new window

> Print Plate

Plate No.	Part No.	Description and Comments	No Per Unit	Price	Add to Cart
P1AA	208052 CLICK FOR MORE INFO	MAINSHAFT Triumph Catalogue Remarks: Overdrive only Revington TR information: Overdrive gearbox mainshaft fitted to early gearboxes TR4-6 with the larger bearing diameter of 22.25mm/0.875". Fitted up to gearbox number CD20281 Consider also exchange part 208052XEX which has either been manufactured by modifying a non-overdrive shaft... READ MORE	1	£248.92 Ex VAT @ 20% £207.43
P1	208051 CLICK FOR MORE INFO	MAINSHAFT Revington TR information: Gearbox Mainshaft. No Longer Available, use 208051SH	1		No longer available
P2	116496 CLICK FOR MORE INFO	Washer, between 1st gear and bearing	1	£43.81 Ex VAT @ 20% £36.51
P3	058391 CLICK FOR MORE INFO	Bearing, main shaft, centre Revington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE	1	£19.78 Ex VAT @ 20% £16.48	Available to order
P4	58955,	Circlip, locating bearing in casing	1		No longer available
P5	058956 CLICK FOR MORE INFO	Circlip, retaining bearing on shaft	1	£1.38 Ex VAT @ 20% £1.15	Available to order
P6	059443 CLICK FOR MORE INFO	Washer, between circlip and bearing Revington TR information: This washer sits between the rear bearing and the retaining circlip in TR2-3B gearbox. Not available new. Use second hand part 059443SH Parts 058949 and 059443 are very similar however 058949 won't fit on the... READ MORE	1		No longer available
P7	058949 CLICK FOR MORE INFO	Washer - Mainshaft, rear Revington TR information: Washer mainshaft TR2-3B gearbox. Not available new. Use second hand part 058949SH Parts 058949 and 059443 are very similar however 058949 won't fit on the mainshaft adjacent to the rear main bearing. Technical information: - ... READ MORE	1		No longer available
P8	SP75G CLICK FOR MORE INFO	Bearing - Mainshaft, rear Revington TR information: Remove circlip when using in a Lockheed axle application.	1	£18.70 Ex VAT @ 20% £15.58
P9	058948 CLICK FOR MORE INFO	Flange, mainshaft Revington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE	1		No longer available
P10	057868 CLICK FOR MORE INFO	Nut, slotted - Flange to mainshaft Revington TR information: see also 057868SH	1	£6.78 Ex VAT @ 20% £5.65	Available to order
P11	WP0024 CLICK FOR MORE INFO	Washer, plain - Flange to mainshaft	1	£1.03 Ex VAT @ 20% £0.86	Available to order
P12	P00012 CLICK FOR MORE INFO	Pin, split - Flange to mainshaft This item has been superceded by PS108091 - see below	1
	PS108091	PIN SPLIT 1/8 X 1-1/8	1	£0.26 Ex VAT @ 20% £0.22	Available to order
P13	128100 CLICK FOR MORE INFO	Gear, 1st speed This item has been superceded by 152770 - see below	1
	152770 CLICK FOR MORE INFO	1ST GEAR TR6 Revington TR information: This 1st speed gear also fits TR4-5. We have good stock of very usable second hand parts.	1	£61.21 Ex VAT @ 20% £51.01	Available to order
P14	129940 CLICK FOR MORE INFO	Bush, 1st speed	1	£49.69 Ex VAT @ 20% £41.41
P15	129941 CLICK FOR MORE INFO	Washer, between 1st gear and mainshaft -118" Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE	A/R	£11.50 Ex VAT @ 20% £9.58
P15	129942 CLICK FOR MORE INFO	Washer, between 1st gear and mainshaft - .121" Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE	A/R	£12.07 Ex VAT @ 20% £10.06
P15	129943 CLICK FOR MORE INFO	Washer, between 1st gear and mainshaft - .124" Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	A/R	£14.26 Ex VAT @ 20% £11.88	Available to order
P15	129944 CLICK FOR MORE INFO	Washer, between 1st gear and mainshaft - .127" Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	A/R	£14.36 Ex VAT @ 20% £11.97
P16	515650 CLICK FOR MORE INFO	Hub, synchro, assembly, list and 2nd This item has been superceded by 153843 - see below	1
	153843 CLICK FOR MORE INFO	SYNCHRO HUB 1st & 2nd TR6 Revington TR information: Not available new please consider second hand part 153843SH.	1		No longer available
P17	122075 CLICK FOR MORE INFO	Spring - Fitted in 1st and 2nd synchro hub Revington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever.	3	£2.33 Ex VAT @ 20% £1.94
P18	BL0016 CLICK FOR MORE INFO	Ball - Fitted in 1st and 2nd synchro hub This item has been superceded by BLS108 - see below	3
	BLS108 CLICK FOR MORE INFO	BALLBEARING 1/4 inch DIA	3	£2.41 Ex VAT @ 20% £2.01
P19	113431 CLICK FOR MORE INFO	Cup, synchor, 1st and 2nd Revington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE	2	£43.60 Ex VAT @ 20% £36.33
P20	105629 CLICK FOR MORE INFO	Gear, 2nd speed Revington TR information: 2nd Gear with 33 teeth used on all cars TR2-6 up to approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160” This gear has 3 oil holes from the bore... READ MORE	1	£169.06 Ex VAT @ 20% £140.88	Available to order
P21	129939 CLICK FOR MORE INFO	Bush, 2nd speed gear	1	£75.86 Ex VAT @ 20% £63.22	Available to order
P22	129941 CLICK FOR MORE INFO	Washer, between 2nd gear and mainshaft - .118" Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE	A/R	£11.50 Ex VAT @ 20% £9.58
P22	129942 CLICK FOR MORE INFO	Washer, between 2nd gear and mainshaft - .121" Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE	A/R	£12.07 Ex VAT @ 20% £10.06
P22	129943 CLICK FOR MORE INFO	Washer, between 2nd gear and mainshaft - .124" Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	A/R	£14.26 Ex VAT @ 20% £11.88	Available to order
P22	129944 CLICK FOR MORE INFO	Washer, between 2nd gear and mainshaft - .127" Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	A/R	£14.36 Ex VAT @ 20% £11.97
P23	105630 CLICK FOR MORE INFO	Gear, 3rd speed	1	£160.54 Ex VAT @ 20% £133.78	Available to order
P24	129940 CLICK FOR MORE INFO	Bush, in 3rd speed gear	1	£49.69 Ex VAT @ 20% £41.41
P25	132220	Washer - Retaining 3rd speed gear on mainshaft	1		No longer available
P26	055707 CLICK FOR MORE INFO	Circlip - Retaining 3rd speed gear on mainshaft	1	£5.52 Ex VAT @ 20% £4.60
P27	509649 CLICK FOR MORE INFO	Sleeve, synchro and operating, assembly Revington TR information: Hub assembly TR250, 5 and early TR6. Not available new use 509649SH Third gear hub assemblies fitted to 4 synchro boxes up to CC/CP TR6 are part numbered 509649, and later cars CR/CF TR6 part number... READ MORE	1		No longer available
P28	122075 CLICK FOR MORE INFO	Spring, 3rd and top Revington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever.	3	£2.33 Ex VAT @ 20% £1.94
P29	BL0016 CLICK FOR MORE INFO	Ball This item has been superceded by BLS108 - see below	3
	BLS108 CLICK FOR MORE INFO	BALLBEARING 1/4 inch DIA	3	£2.41 Ex VAT @ 20% £2.01
P30	113431 CLICK FOR MORE INFO	Cup, synchro, 3rd and top Revington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE	2	£43.60 Ex VAT @ 20% £36.33
	148949 CLICK FOR MORE INFO	CONSTANT GEAR TRAIN ASSEMBLY Triumph Catalogue Remarks: Comprising Items P.31, and P.43 Revington TR information: Fitted to 3A-4-4A, 250 & 5, 148949 is a gear set consisting of an imput shaft and constant gear which were interchangeable as a pair. The bore of the input gear is 1.125" and suits bearing... READ MORE	1	£465.48 Ex VAT @ 20% £387.90	Available to order
P31		CONSTANT PINION SHAFT Triumph Catalogue Remarks: Part of Gear Train Assembly 148949	1
P32	145008 CLICK FOR MORE INFO	Bearing, needle roller, pinion shaft Revington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949	1	£25.78 Ex VAT @ 20% £21.48
P33	060658 CLICK FOR MORE INFO	Thrower, oil, constant pinion	1	£2.27 Ex VAT @ 20% £1.89	Available to order
P34	058391 CLICK FOR MORE INFO	Bearing, ball Revington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE	1	£19.78 Ex VAT @ 20% £16.48	Available to order
P35	053955	Circiip, securing bearing in casing	1		No longer available
P36	058956 CLICK FOR MORE INFO	Circlip, retaining bearing on shaft	1	£1.38 Ex VAT @ 20% £1.15	Available to order
P37	060078 CLICK FOR MORE INFO	Washer, bearing	1	£1.10 Ex VAT @ 20% £0.92
P38	128105 CLICK FOR MORE INFO	COUNTERSHAFT		£43.80 Ex VAT @ 20% £36.50
P39	128107 CLICK FOR MORE INFO	Gear, countershaft, 1st and reverse Revington TR information: First and reverse gear countershaft. consider using our uprated version 128107UREX or 128107URNEW. 128107UR comes with bearings First gear has 16 teeth and is 53.4mm diameter. Fitted up to CC89816 Later cars used UKC662 post CC89817 which... READ MORE	1		No longer available
P40	140508 CLICK FOR MORE INFO	Gear, countershaft, 2nd speed	1	£111.50 Ex VAT @ 20% £92.92
P41	140509 CLICK FOR MORE INFO	Gear, countershaft, 3rd speed	1	£99.85 Ex VAT @ 20% £83.21	Available to order
P42	059456 CLICK FOR MORE INFO	Piece, distance, between 3rd and constant gear	1	£24.25 Ex VAT @ 20% £20.21	Available to order
P43		Gear, constant Triumph Catalogue Remarks: Part of Gear Train Assembly 148949	1
P44	145301 CLICK FOR MORE INFO	Bearing, needle This item has been superceded by 150339 - see below	2
	150339 CLICK FOR MORE INFO	BEARING L/SHAFT CAGED ORIGINAL Revington TR information: TR5 and TR6 open caged bearing For TR4 bearing see 126862 below. ForTR2and TR3 see 058088 below.	2	£6.44 Ex VAT @ 20% £5.37
P45	147749 CLICK FOR MORE INFO	Circlip, retaining bearing in countershaft	2	£1.76 Ex VAT @ 20% £1.47
P46	129955 CLICK FOR MORE INFO	Washer, thrust, front of countershaft	1	£11.59 Ex VAT @ 20% £9.66
P47	129956 CLICK FOR MORE INFO	Washer, thrust, rear of countershaft	1	£17.39 Ex VAT @ 20% £14.49
P48	129937 CLICK FOR MORE INFO	REVERSE SPINDLE	1	£38.39 Ex VAT @ 20% £31.99
P49	128110 CLICK FOR MORE INFO	Wheel, reverse, assembly	1	£151.31 Ex VAT @ 20% £126.09	Available to order
P50	129862 CLICK FOR MORE INFO	Bush, reverse wheel	1	£11.74 Ex VAT @ 20% £9.78
P51	129954 CLICK FOR MORE INFO	Screw, wedglok - Countershaft and reverse shaft to gearbox rear of countershaft	1	£2.87 Ex VAT @ 20% £2.39
P52	129938 CLICK FOR MORE INFO	Plate, locking - Countershaft and reverse shaft to gearbox rear of countershaft	1	£8.47 Ex VAT @ 20% £7.06	Available to order
P53	129894	REVERSE OPERATING LEVER ASSEMBLY	1		No longer available
P54	106448 CLICK FOR MORE INFO	Pin, fulcrum, fitted in gearbox	1		No longer available
P55	TN3209 CLICK FOR MORE INFO	Nut - Fulcrum pin to gearbox This item has been superceded by NY606121 - see below	1
	NY606121 CLICK FOR MORE INFO	NUT NYLOC HALF 3/8UNF X 3/8" THIN Revington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE	1	£0.79 Ex VAT @ 20% £0.66
P56	WP0036 CLICK FOR MORE INFO	Washer, plain - Fulcrum pin to gearbox This item has been superceded by WP10610057 - see below	1
	WP10610057	WASHER PLAIN 3/8 X 5/8 X 0.057"	1	£0.65 Ex VAT @ 20% £0.54

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR250 Plate P - GEARBOX: Internal

208052

208051

116496

058391

58955,

Circlip, locating bearing in casing

058956

059443

058949

SP75G

058948

057868

WP0024

P00012

Pin, split - Flange to mainshaft

PS108091

128100

Gear, 1st speed

152770

129940

129941

129942

129943

129944

515650

Hub, synchro, assembly, list and 2nd

153843

122075

BL0016

Ball - Fitted in 1st and 2nd synchro hub

BLS108

113431

105629

129939

129941

129942

129943

129944

105630

129940

132220

Washer - Retaining 3rd speed gear on mainshaft

055707

509649

122075

BL0016

Ball

BLS108

113431

148949

CONSTANT PINION SHAFT

145008

060658

058391

053955

Circiip, securing bearing in casing

058956

060078

128105

128107

140508

140509

059456

Gear, constant

145301

Bearing, needle

150339

147749

129955

129956

129937

128110

129862

129954

129938

129894

REVERSE OPERATING LEVER ASSEMBLY

106448