Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR3 Plate L - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR.
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
L1 | 201590 |
MAIN SHAFTTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
L1A | 204011 |
MAIN SHAFTTriumph Catalogue Remarks: From Comm. No. TS26825 |
1 |
£883.36 Ex VAT @ 20% |
|
|
L1B | 201590 |
MAIN SHAFTTriumph Catalogue Remarks: From Comm. No. TS27051 |
1 | ||
|
L1C | 204011 |
MAIN SHAFTTriumph Catalogue Remarks: From Comm. No. TS27063 |
1 |
£883.36 Ex VAT @ 20% |
|
|
L2 | 060569 |
Washer, between 1st gear and bearingTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
L2A | 116496 |
Washer, between 1st gear and bearingTriumph Catalogue Remarks: From Comm. No. TS26825 |
1 |
£43.81 Ex VAT @ 20% |
|
|
L2B | 060569 |
Washer, between 1st gear and bearingTriumph Catalogue Remarks: From Comm. No. TS27051 |
1 | ||
|
L2C | 116496 |
Washer, between 1st gear and bearingTriumph Catalogue Remarks: From Comm. No. TS27063 |
1 |
£43.81 Ex VAT @ 20% |
|
|
L3 | 058391 |
Bearing, mainshaft, centreRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
|
L4 | 058955 |
Circlip, locating bearing In casing |
1 |
£5.52 Ex VAT @ 20% |
|
|
L5 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
|
L6 | 059443 |
Washer, between circlip and bearingRevington TR information: This washer sits between the rear bearing and the retaining circlip in TR2-3B gearbox. Not available new. Use second hand part 059443SH Parts 058949 and 059443 are very similar however 058949 won't fit on the... READ MORE |
1 | ||
|
L7 | 058949 |
Washer, mainshaft, rearRevington TR information: Washer mainshaft TR2-3B gearbox. Not available new. Use second hand part 058949SH Parts 058949 and 059443 are very similar however 058949 won't fit on the mainshaft adjacent to the rear main bearing. Technical information: - ... READ MORE |
1 | ||
|
L8 | SP75G |
Bearing, mainshaft, rearRevington TR information: Remove circlip when using in a Lockheed axle application. |
1 |
£18.70 Ex VAT @ 20% |
|
|
L9 | 058948 |
Flange, mainshaftRevington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE |
1 | ||
|
L10 | 057868 |
Nut, slotted, flange to mainshaftRevington TR information: see also 057868SH |
1 |
£6.78 Ex VAT @ 20% |
|
|
L11 | WP0024 |
Washer, plain, between nut and flange |
1 |
£1.03 Ex VAT @ 20% |
|
|
L12 | PC0012 |
Pin, split, locking nutThis item has been superceded by PS108091 - see below |
1 | ||
|
PS108091 |
PIN SPLIT 1/8 X 1-1/8 |
1 |
£0.26 Ex VAT @ 20% |
||
|
L13 | 105627 |
Sleeve, 1st gear |
1 |
£458.86 Ex VAT @ 20% |
|
|
L14 | 106106 |
Plunger, Interlock In 1st gear sleeveRevington TR information: Not Currently Available |
1 |
£2.08 Ex VAT @ 20% |
|
|
L15 | BL0016 |
Ball, Interlock, over plungerThis item has been superceded by BLS108 - see below |
1 | ||
|
BLS108 |
BALLBEARING 1/4 inch DIA |
1 |
£2.41 Ex VAT @ 20% |
||
|
L15A | 037948 |
Shim, for synchro spring |
A/R |
£0.65 Ex VAT @ 20% |
|
|
L16 | 037502 |
Spring, synchro, fitted In 1st gear sleeveTriumph Catalogue Remarks: From Comm. No. TS________ |
3 | ||
|
122075 |
Spring, synchro, fitted In 1st gear sleeveRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
||
|
L16A | 122075 |
Spring, synchro, fitted In 1st gear sleeveTriumph Catalogue Remarks: From Comm. No. TS________ |
3 |
£2.33 Ex VAT @ 20% |
|
|
L17 | BL0016 |
Ball, over springThis item has been superceded by BLS108 - see below |
3 | ||
|
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
||
|
L18 | 109137 |
Gear, 1st speedTriumph Catalogue Remarks: From Comm. No. TS1 |
1 |
£261.96 Ex VAT @ 20% |
|
|
L18A | 116135 |
Gear, 1st speedTriumph Catalogue Remarks: From Comm. No. TS15969 |
1 | ||
|
L19 | 060570 |
Cup, synchronising 2nd speedTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
 |
113431 |
Cup, synchronising 2nd speedRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
1 |
£43.60 Ex VAT @ 20% |
||
|
L19A | 113431 |
Cup, synchronising 2nd speedTriumph Catalogue Remarks: From Comm. No. TS15969 |
1 |
£43.60 Ex VAT @ 20% |
|
|
L20 | 105732 |
Washer, between 1st speed sleeve and 2nd speed gear |
1 |
£63.24 Ex VAT @ 20% |
|
|
L21 | 105629 |
Gear, 2nd speedRevington TR information: 2nd Gear with 33 teeth used on all cars TR2-6 up to approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160” This gear has 3 oil holes from the bore... READ MORE |
1 |
£169.06 Ex VAT @ 20% |
|
|
L22 | 105731 |
Bush, 2nd speed gearThis item has been superceded by 129939 - see below |
1 | ||
|
129939 |
BUSH SECOND GEAR TR3-6, T2000/2500 |
1 |
£75.86 Ex VAT @ 20% |
||
|
L23 | 105630 |
Gear, 3rd speed |
1 |
£160.54 Ex VAT @ 20% |
|
|
L24 | 101585 |
Bush, 3rd speed gear |
1 |
£44.18 Ex VAT @ 20% |
|
|
L25 | 055707 |
Circlip, retaining 3rd speed gear on shaft |
1 |
£5.52 Ex VAT @ 20% |
|
|
L26 | 101586 |
Washer, between circlip and gear |
1 | ||
|
L27 | 060570 |
Cup, synchronising 3rd and top gearsTriumph Catalogue Remarks: From Comm. No. TS1 |
2 | ||
|
113431 |
Cup, synchronising 2nd speedRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
||
|
L27A | 113431 |
Cup, synchronising 3rd and top gearsTriumph Catalogue Remarks: From Comm. No. TS15969 |
2 |
£43.60 Ex VAT @ 20% |
|
|
L28 | 062064 |
Sleeve, synchronising 3rd and Top gearsRevington TR information: Not available new, use 062064SH. |
1 | ||
|
L29 | 037948 |
Shim, synchro spring |
A/R |
£0.65 Ex VAT @ 20% |
|
|
L30 | 037502 |
Spring, synchro, fitted in 3rd/Top gear sleeveTriumph Catalogue Remarks: From Comm. No. TS_______ |
3 | ||
|
122075 |
Spring, synchro, fitted In 1st gear sleeveRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
||
|
L30A | 122075 |
Spring, synchro, fitted in 3rd/Top gear sleeveTriumph Catalogue Remarks: From Comm. No. TS_______ |
3 |
£2.33 Ex VAT @ 20% |
|
|
L31 | BL0016 |
Ball, over springThis item has been superceded by BLS108 - see below |
3 | ||
|
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
||
|
L32 | 062065 |
Sleeve, operating 3rd/Top gearsTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
L32A | 113430 |
Sleeve, operating 3rd/Top gearsTriumph Catalogue Remarks: From Comm. No. TS15969 |
1 | ||
|
L33 | 201712 |
CONSTANT PINION SHAFTTriumph Catalogue Remarks: From Comm. No. TS1 |
1 | ||
|
L33A | 204215 |
CONSTANT PINION SHAFTTriumph Catalogue Remarks: From Comm. No. TS26825 |
1 | ||
|
L33B | 201712 |
CONSTANT PINION SHAFTTriumph Catalogue Remarks: From Comm. No. TS27051 |
1 | ||
|
L33C | 204215 |
CONSTANT PINION SHAFTTriumph Catalogue Remarks: From Comm. No. TS27063 |
1 | ||
|
L34 | 055911 |
Bush, constant pinionTriumph Catalogue Remarks: From Comm. No. TS1 |
1 |
£32.88 Ex VAT @ 20% |
|
|
L34A | 055911 |
Bush, constant pinionTriumph Catalogue Remarks: From Comm. No. TS27051 |
1 |
£32.88 Ex VAT @ 20% |
|
|
L34B | 117836 |
Bearing, needle, constant pinionTriumph Catalogue Remarks: From Comm. No. TS26825 |
1 | ||
|
145008 |
CAGED NEEDLE BEARING TR5/6Revington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949 |
1 |
£25.78 Ex VAT @ 20% |
||
|
L34C | 117836 |
Bearing, needle, constant pinionTriumph Catalogue Remarks: From Comm. No. TS27063 |
1 | ||
|
145008 |
CAGED NEEDLE BEARING TR5/6Revington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949 |
1 |
£25.78 Ex VAT @ 20% |
||
|
L35 | 060658 |
Thrower, oil, constant pinion |
1 |
£2.27 Ex VAT @ 20% |
|
|
L36 | 058391 |
Bearing, ball, constant pinionRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
|
|
L37 | 058955 |
Circlip, locating bearing |
1 |
£5.52 Ex VAT @ 20% |
|
|
L38 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
|
|
L39 | 060078 |
Washer, between bearing and circlip |
1 |
£1.10 Ex VAT @ 20% |
|
|
L40 | 108168 |
COUNTERSHAFT |
1 |
£51.82 Ex VAT @ 20% |
|
|
L41 | 105625 |
Gear, countershaft, 1st speedRevington TR information: Consider also second hand part 105625SH |
1 |
£242.88 Ex VAT @ 20% |
|
|
L42 | 105658 |
Gear, countershaft, 2nd speed |
1 |
£136.52 Ex VAT @ 20% |
|
|
L43 | 105659 |
Gear, countershaft. 3rd speed |
1 | ||
|
L44 | 059465 |
Piece, distance, between 3rd speed and constant gear |
1 | ||
|
L45 | 105626 |
Gear, constantRevington TR information: Not available new. Use 105626SH or 105626SR |
1 | ||
|
L46 | 058088 |
Rollers, needleRevington TR information: Needle roller. 48 required for the TR2 and TR3 Layshaft application. For TR5 and TR6 layshaft bearing see 150339 below. ForTR4 see 126862 below. |
48 |
£0.82 Ex VAT @ 20% |
|
|
L47 | 055721 |
Ring, retaining needle rollers |
4 |
£12.66 Ex VAT @ 20% |
|
|
L48 | 059454 |
Washer, thrust, front of countershaftThis item has been superceded by 129956 - see below |
1 | ||
|
129956 |
THRUST REAR C/SHAFT |
1 |
£17.39 Ex VAT @ 20% |
||
|
L48A | 055720 |
Washer, thrust, rear of countershaftThis item has been superceded by 129955 - see below |
1 | ||
|
129955 |
THRUST WASHER FF C/S |
1 |
£11.59 Ex VAT @ 20% |
||
|
L50 | 105757 |
REVERSE SPINDLE |
1 | ||
|
L51 | 111153 |
Wheel, reverseRevington TR information: Our stock is Stanpart original |
1 |
£139.97 Ex VAT @ 20% |
|
|
L52 | 055715 |
Screw, retaining countershaft and reverse spindle in casing |
1 |
£11.96 Ex VAT @ 20% |
|
|
L53 | WL0208 |
Washer, spring, on screwThis item has been superceded by WS105090853 - see below |
1 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
||
|
L54 | 105727 |
REVERSE WHEEL OPERATING FORK |
1 | ||
|
L55 | 105782 |
Rod, operating fork |
1 | ||
|
L56 | 058951 |
Bush, on rear end of rod |
1 | ||
|
L57 | 055815 |
Screw, retaining rod in casing |
1 | ||
|
L58 | JN2158 |
Nut, locking screwThis item has been superceded by NP505061 - see below |
1 | ||
|
NP505061 |
NUT PLAIN 5/16 UNC x 3/16" TALLRevington TR information: consider also Stainles Steel nut NP505064 |
1 |
£0.46 Ex VAT @ 20% |
