Choose Car Type


then
Search for parts
or
Browse
for parts

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR2-4A NEW CYLINDER HEADS

Only TR4A style heads are produced new. These however can be used on TRs 2-4A with appropriate manifolds and gaskets.

Revington TR will be happy to produce a bespoke head to customer's requirement, to the same standard as RTR1037EXK, RTR1115-1EXK or RTR1115-2EXK using an aluminium casting 511695ANF as a basis. The cost will be the addition of the two part numbers individual cost.

NOTE: These new heads have been made to the TR4A pattern, but can easily be used on TR2-4 where a high port head is required. There is no intention to reproduce TR2 low port heads, which remain only available on an exchange basis. TR2 owners should use high port manifolds and H6 carburettors when installing a new TR4A style head.
 
Please be aware that the shroud over the inlet valves on newly produced TR4A cylinder heads, which is usually removed when a cylinder head is 'worked' has been omitted on these heads. This modification provides a great improvement in gas flow but does require the use of a solid copper gasket to ensure a reliable gas tight seal. RevingtonTR sell a range of suitable gaskets, the thickness of which can be chosen to provide a desired compression ratio. Please see the list of gasket shown with each cylinder head.

6 results found.
< Back
  Part No. Description and Comments Price Add to Cart
514748

CLICK FOR
MORE INFO

CYLINDER HEAD TR4A UNLEADED CAST IRON

Revington TR information: TR4A New cast iron cylinder head with unleaded seats, built up with valves, springs, caps etc. ready to fit. Suitable for 86mm engines. Will also fit TR2-4 with suitable manifolds and gaskets. We also supply this... READ MORE

£2888.80

Ex VAT @ 20%
£2407.33



Available to order
514748A

CLICK FOR
MORE INFO

CYL HEAD TR4A ALLY STD BUILT UP

Revington TR information: TR4A New aluminium cylinder head with unleaded seats, built up with valves, springs, caps etc. ready to fit. Suitable for 86mm engines. Will also fit TR2-4 with suitable manifolds and gaskets. 70-75lbs/ft is the head torque.... READ MORE

£4022.70

Ex VAT @ 20%
£3352.25



Available to order
511695

CLICK FOR
MORE INFO

CYL HEAD IRON BARE TR4A

Revington TR information: TR4A New cast iron cylinder head fully machined with unleaded seats and guides, but with no valves, springs, caps etc. ready to accept your own parts. Suitable for 86mm engines. Will also fit TR2-4 with suitable... READ MORE

£2661.10

Ex VAT @ 20%
£2217.58



Available to order
511695A

CLICK FOR
MORE INFO

CYL HEAD ALLOY BARE

Revington TR information: TR4A New aluminium cylinder head fully machined with unleaded seats and guides, but with no valves, springs, caps etc. ready to accept your own parts. Suitable for 86mm engines. Will also fit TR2-4 with suitable manifolds... READ MORE

£2731.26

Ex VAT @ 20%
£2276.05



Available to order
511695NF

CLICK FOR
MORE INFO

CAST IRON BARE HEAD TR4A

Revington TR information: TR4A New cast iron cylinder head. This head is supplied bare, without guides, seats core plugs or pushrod tubes fitted and without the combustion chamber machining, allowing for personalised modification. Suitable for all high port applications... READ MORE

£2899.94

Ex VAT @ 20%
£2416.62



Available to order
511695ANF

CLICK FOR
MORE INFO

ALUMINIUM BARE HEAD TR4A

Revington TR information: TR4A New aluminium cylinder head. This head is supplied bare, without guides, seats core plugs or pushrod tubes fitted and without the combustion chamber machining, allowing for personalised modification. Suitable for all high port applications TR3-4A... READ MORE

£1759.50

Ex VAT @ 20%
£1466.25



Available to order
6 results found.