Home » Engine, Transmission, wheels/Tyres and Heating/Cooling

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR4 Plate A - ENGINE: CYLINDER BLOCK AND HEAD.

> Open plate

> Open plate in new window

> Print Plate

> Close plate

> Open plate in new window

> Print Plate

Plate No.	Part No.	Description and Comments	No Per Unit	Price	Add to Cart
A1AA	510914 CLICK FOR MORE INFO	ENGINE UNIT 86 mm			No longer available
A1BB	510915 CLICK FOR MORE INFO	ENGINE UNIT 83 mm	1		No longer available
A1CC	510924 CLICK FOR MORE INFO	DECARBONISING SET 86 mm This item has been superceded by GEG178 - see below	1
	GEG178 CLICK FOR MORE INFO	GASKET SET HEAD TR2-4A 86MM, HIGH PORT Revington TR information: This is the top gasket set reqired when 86mm pistons and liners are used. High port. You may also consider the "conversion set" that includes the bottom set and front engine plate gaskets and front cover... READ MORE	1	£36.91 Ex VAT @ 20% £30.76	Available to order
A1DD	505281 CLICK FOR MORE INFO	DECARBONISING SET 83 mm Revington TR information: TR2-4A Cylinder head gasket set high port 1991cc (83mm). 83mm was an option up to TR4A but rarely taken up. The 83mm gasket is no longer available and the set includes an 86mm gasket. This gasket... READ MORE	1	£101.03 Ex VAT @ 20% £84.19
A1EE	509827 CLICK FOR MORE INFO	SUPPLEMENTARY ENGINE GASKET SET (To be used in conjunction with Decarbonising Set for complete Engine strip) This item has been superceded by GEG248 - see below	1
	GEG248 CLICK FOR MORE INFO	GASKET SET CONVERSION TR2/4A - BOTTOM END Revington TR information: This is a bottom end gasket set. Head gasket set and front cover seal are also required for a full engine gasket set.	1	£42.20 Ex VAT @ 20% £35.17
A1	202817	CYLINDER BLOCK 86 mm	1		No longer available
A1A	502363 CLICK FOR MORE INFO	CYLINDER BLOCK 83 mm Revington TR information: not available new, use second hand part 502363SH	1		No longer available
A2		Cap, bearing Front Triumph Catalogue Remarks: Not serviced
A2A		Cap, bearing Centre Triumph Catalogue Remarks: Not serviced
A3		Cap, bearing Rear Triumph Catalogue Remarks: Not serviced
A4	058335 CLICK FOR MORE INFO	Packing, felt, rear bearing cap	2	£6.31 Ex VAT @ 20% £5.26
A5	057121 CLICK FOR MORE INFO	Screw, set Bearing caps to block	6	£7.34 Ex VAT @ 20% £6.12	Available to order
A6	101587 CLICK FOR MORE INFO	Washer, spring Bearing caps to block This item has been superceded by WS108143133 - see below	6
	WS108143133	WASHER SPRING 1/2" RECT SECTION	6	£0.16 Ex VAT @ 20% £0.13
A7	056405 CLICK FOR MORE INFO	Bush, oil pump drive shaft	1	£73.03 Ex VAT @ 20% £60.86	Available to order
A7A	044473 CLICK FOR MORE INFO	Plug, core, rear of camshaft	1	£3.22 Ex VAT @ 20% £2.68
A7B	056765 CLICK FOR MORE INFO	Plug, core, oil gallery ends Revington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE	2	£8.04 Ex VAT @ 20% £6.70
A8	102785 CLICK FOR MORE INFO	Screw, set Revington TR information: May need to consider second hand.	3		No longer available
A9	500463 CLICK FOR MORE INFO	Washer, copper Oil gallery side This item has been superceded by WC10711064 - see below	3
	WC10711064	WASHER COPPER 7/16 x 11/16 x .064	3	£0.89 Ex VAT @ 20% £0.74
A9A	HU0954 CLICK FOR MORE INFO	Screw, set Oil gallery side This item has been superceded by SH506041 - see below	1
	SH506041	SCREW 3/8 UNC X 1/2 INCH	1	£1.60 Ex VAT @ 20% £1.33
A9B	500464 CLICK FOR MORE INFO	Washer, copper Oil gallery side This item has been superceded by WC10610080 - see below
	WC10610080	WASHER COPPER 3/8 X 5/8 X .080"		£1.81 Ex VAT @ 20% £1.51
A10	061478 CLICK FOR MORE INFO	Tap, water drain Revington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE	1	£24.19 Ex VAT @ 20% £20.16
A11	WF0511 CLICK FOR MORE INFO	Washer, fibre, water drain tap This item has been superceded by WF10812062 - see below	1
	WF10812062	WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK	1	£0.70 Ex VAT @ 20% £0.58
A12	113570 CLICK FOR MORE INFO	Stud, cylinder head attachment, front and centre of block-R.H. side Revington TR information: 1/2"UNC	2	£21.97 Ex VAT @ 20% £18.31
A13	121734 CLICK FOR MORE INFO	Stud, cylinder head attachment, rear of block-R.H. side	1	£36.85 Ex VAT @ 20% £30.71
A14	113169 CLICK FOR MORE INFO	Stud, cylinder head attachment, adjacent to centre of cylinder head-R.H. side	2	£19.90 Ex VAT @ 20% £16.58
A15	106959 CLICK FOR MORE INFO	Stud, cylinder head attachment, front, centre and rear of block- L.H. side Revington TR information: Head stud for various applications from TR2 - TR4A	3	£17.27 Ex VAT @ 20% £14.39
A16	106960 CLICK FOR MORE INFO	Stud, cylinder head attachment, adjacent to centre of cylinder head-L.H. side	2	£17.64 Ex VAT @ 20% £14.70
A16A	V7318 CLICK FOR MORE INFO	Stud, oil pump attachment This item has been superceded by ST705111 - see below	3
	ST705111	STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC	3	£1.38 Ex VAT @ 20% £1.15
A17	V7322 CLICK FOR MORE INFO	Stud, petrol pump attachment This item has been superceded by ST705111 - see below	2
	ST705111	STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC	2	£1.38 Ex VAT @ 20% £1.15
A18	V7322 CLICK FOR MORE INFO	Stud, distributor pedestal attachment This item has been superceded by ST705111 - see below	2
	ST705111	STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC	2	£1.38 Ex VAT @ 20% £1.15
A19	V7318 CLICK FOR MORE INFO	Stud, front engine plate and timing cover attachment This item has been superceded by ST705111 - see below	1
	ST705111	STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC	1	£1.38 Ex VAT @ 20% £1.15
A20	DP0512 CLICK FOR MORE INFO	Dowel, locating front engine plate This item has been superceded by DP514 - see below	2
	DP514	DOWEL 5/16 DIA X 7/8" LONG	2	£1.78 Ex VAT @ 20% £1.48
A21	V7318 CLICK FOR MORE INFO	Stud, gearbox attachment This item has been superceded by ST705111 - see below	3
	ST705111	STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC	3	£1.38 Ex VAT @ 20% £1.15
A21A	DP0612 CLICK FOR MORE INFO	Dowel, locating gearbox on rear face of cylinder block This item has been superceded by DP619 - see below	2
	DP619	DOWEL 3/8" DIA x 1.5" LONG Cut to fit Revington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance.	2	£3.00 Ex VAT @ 20% £2.50
A22	112170 CLICK FOR MORE INFO	Stud Oil filter (pressure) attachment lower front This item has been superceded by ST705171 - see below	1
	ST705171	STUD 5/16 UNC/UNF2-1/8	1	£2.47 Ex VAT @ 20% £2.06
A22A	DN3408 CLICK FOR MORE INFO	Nut, cap Oil filter (pressure) attachment lower front This item has been superceded by 14B2685 - see below	1
	14B2685	NUT DOME 5/16 UNF CHROME	1	£2.39 Ex VAT @ 20% £1.99
A23	112233 CLICK FOR MORE INFO	Bolt, oil filter (pressure) attachment, upper front This item has been superceded by BH505101 - see below	1
	BH505101	BOLT 5/16 UNC X 1-1/4 INCH	1	£1.22 Ex VAT @ 20% £1.02
A24	112231 CLICK FOR MORE INFO	Bolt, oil filter (pressure) attachment, upper rear This item has been superceded by BH505321 - see below	1
	BH505321	BOLT 5/16 UNC X 4 INCH	1	£4.18 Ex VAT @ 20% £3.48
A25	112232 CLICK FOR MORE INFO	Bolt, oil filter (pressure) attachment, lower rear This item has been superceded by BH505241 - see below	1
	BH505241	BOLT 5/16 UNC X 3 INCH	1	£2.28 Ex VAT @ 20% £1.90	Available to order
A25A	WL0208 CLICK FOR MORE INFO	Washer, lock, fitted on bolts This item has been superceded by WS105090853 - see below	3
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	3	£0.25 Ex VAT @ 20% £0.21
A26	055810 CLICK FOR MORE INFO	FRONT SEALING BLOCK Revington TR information: Sealing block, front of engine Tr2-4A. Consider original second hand part 055810SH	1		No longer available
A27	059381 CLICK FOR MORE INFO	Pad, sealing, in ends of block	2	£1.21 Ex VAT @ 20% £1.01
A28	056574 CLICK FOR MORE INFO	Screw, sealing block attachment	2	£2.05 Ex VAT @ 20% £1.71
A29	060862 CLICK FOR MORE INFO	REAR OIL SEAL ASSEMBLY Revington TR information: This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The reverse scroll... READ MORE	1	£87.40 Ex VAT @ 20% £72.83	Available to order
A30	HU0755 CLICK FOR MORE INFO	Screw, set Oil seal to cylinder block This item has been superceded by SH504051 - see below	8
	SH504051	SCREW 1/4 UNC X 5/8"	8	£0.42 Ex VAT @ 20% £0.35
A30A	WL0207 CLICK FOR MORE INFO	Washer, spring Oil seal to cylinder block This item has been superceded by WS104070643 - see below	8
	WS104070643	WASHER SPRING 1/4" RECT SECTION	8	£0.20 Ex VAT @ 20% £0.17
A31	122166 CLICK FOR MORE INFO	CYLINDER LINER (Graded F, G, H) Revington TR information: Liner 86mm. Standard Sizes up to plus +60 available	4	£99.71 Ex VAT @ 20% £83.09	Available to order
A32	112789 CLICK FOR MORE INFO	Gasket, liner 86 mm Engine Revington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE	2	£3.79 Ex VAT @ 20% £3.16	Available to order
A31	105539 CLICK FOR MORE INFO	CYLINDER LINER (Graded F, G, H) Revington TR information: Liners 83mm Standard Sizes up to +40 available	4	£104.11 Ex VAT @ 20% £86.76	Available to order
A32	112789 CLICK FOR MORE INFO	Gasket, liner 83 mm Engine Revington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE	2	£3.79 Ex VAT @ 20% £3.16	Available to order
A33	304711 CLICK FOR MORE INFO	FRONT ENGINE PLATE Revington TR information: the pin is 056763	1		No longer available
A34	056389 CLICK FOR MORE INFO	Washer, joint Engine plate attachment to cylinder block	1	£2.24 Ex VAT @ 20% £1.87
A34A	HU0856 CLICK FOR MORE INFO	Screw, set Engine plate attachment to cylinder block This item has been superceded by SH505061 - see below	5
	SH505061 CLICK FOR MORE INFO	SCREW 5/16 UNC X 3/4 INCH	5	£0.90 Ex VAT @ 20% £0.75
A34B	WL0208 CLICK FOR MORE INFO	Washer, spring Engine plate attachment to cylinder block This item has been superceded by WS105090853 - see below	5
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	5	£0.25 Ex VAT @ 20% £0.21
A35	130985 CLICK FOR MORE INFO	FRONT ENGINE MOUNTING Revington TR information: This round engine mounting was fitted to TR4. The square type part number 143057 was fitted to TR4A. The parts are however interchangeable.	2	£19.15 Ex VAT @ 20% £15.96
A36	HN2009 CLICK FOR MORE INFO	Nut Mounting to engine plate and frame This item has been superceded by NP606111 - see below	4
	NP606111	NUT PLAIN 3/8 UNF X 11/32" (STD)	4	£0.14 Ex VAT @ 20% £0.12
A37	WL0209 CLICK FOR MORE INFO	Washer, lock Mounting to engine plate and frame This item has been superceded by WS106111243 - see below	4
	WS106111243	WASHER SPRING 3/8" RECT SECTION	4	£0.37 Ex VAT @ 20% £0.31
A37A	133471 CLICK FOR MORE INFO	Bracket, engine restrictor	1	£39.76 Ex VAT @ 20% £33.13	Available to order
A37B	650325 CLICK FOR MORE INFO	Buffer, assembly, engine restrictor Revington TR information: Fitted up to body number 37689CT. Not available new. Use either second hand part 650325SH or 612962, which will need cutting down to suit.	1		No longer available
A37C	612067 CLICK FOR MORE INFO	Buffer, rubber Revington TR information: Not available new. Use 612962.	1		No longer available
A37D	HN2008 CLICK FOR MORE INFO	Nut Buffer assembly to restrictor bracket This item has been superceded by NP605081 - see below	1
	NP605081	NUT PLAIN 5/16 UNF	1	£0.17 Ex VAT @ 20% £0.14
A37E	WL0208 CLICK FOR MORE INFO	Washer, spring Buffer assembly to restrictor bracket This item has been superceded by WS105090853 - see below	1
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	1	£0.25 Ex VAT @ 20% £0.21
A38	133471 CLICK FOR MORE INFO	Plate Triumph Catalogue Remarks: This plate is shown in the manual but was never fitted to production cars, however a torque reaction plate 133471 was, in a different position to that shown		£39.76 Ex VAT @ 20% £33.13	Available to order
A39	115350 CLICK FOR MORE INFO	OIL SUMP ASSEMBLY Revington TR information: Consider alloy sump 301318 or second hand part 115350SH	1		No longer available
A40	056646 CLICK FOR MORE INFO	Washer, joint, between sump and cylinder block This item has been superceded by 211123 - see below	1
	211123 CLICK FOR MORE INFO	GASKET SUMP TR2-4A Revington TR information: This is a thinner paper gasket that is more suitable for this application. If you have a joint which is irregular or not flat maybe try 211123-1 which is a cork gasket. Should you require a complete... READ MORE	1	£4.60 Ex VAT @ 20% £3.83
A41	114774 CLICK FOR MORE INFO	Plug, oil drain Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE	1	£5.87 Ex VAT @ 20% £4.89	Available to order
A42	100749 CLICK FOR MORE INFO	Screw, set Sump to Cylinder block This item has been superceded by SH505061 - see below	16
	SH505061 CLICK FOR MORE INFO	SCREW 5/16 UNC X 3/4 INCH	16	£0.90 Ex VAT @ 20% £0.75
A42A	HU0855	Screw, set Sump to front sealing block	1		No longer available
A42B	105220 CLICK FOR MORE INFO	Screw, set Breather pipe clip and slave cylinder stay to sump and cylinder block This item has been superceded by BH505101 - see below	2
	BH505101	BOLT 5/16 UNC X 1-1/4 INCH	2	£1.22 Ex VAT @ 20% £1.02
A43	WL0208 CLICK FOR MORE INFO	Washer, lock, on set screws This item has been superceded by WS105090853 - see below	19
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	19	£0.25 Ex VAT @ 20% £0.21
A44	102139 CLICK FOR MORE INFO	Dipstick Revington TR information: Consider also 102139SH and 102139SHPC	1	£31.63 Ex VAT @ 20% £26.36	Available to order
A45	032307 CLICK FOR MORE INFO	Washer, felt	1	£1.82 Ex VAT @ 20% £1.52
A45A	502126	ALUMINIUM OIL SUMP KIT Triumph Catalogue Remarks: For details see Accessories Section	1		No longer available
A46	205020 CLICK FOR MORE INFO	BREATHER PIPE ASSEMBLY Revington TR information: Not available new. Use 205020SH or RTR1356	1		No longer available
A47	120211 CLICK FOR MORE INFO	Bracket Breather pipe to cylinder block Revington TR information: No Longer Available see 120211SH	1		No longer available
A47A	WM0083 CLICK FOR MORE INFO	Washer Breather pipe to cylinder block This item has been superceded by WP10510250 - see below	1
	WP10510250 CLICK FOR MORE INFO	WASHER PLAIN 5/16" x 5/8" x 0.250" Revington TR information: 3/4" o/d is occassionally supplied if 5/8" o/d is not available as some english sizes are getting more difficult to obtain.	1	£3.55 Ex VAT @ 20% £2.96	Available to order
A48	HU0805 CLICK FOR MORE INFO	Screw, set Breather pipe to bracket This item has been superceded by SH605051 - see below	1
	SH605051 CLICK FOR MORE INFO	SCREW 5/16 UNF X 5/8 INCH	1	£1.52 Ex VAT @ 20% £1.27
A49	WL0208 CLICK FOR MORE INFO	Washer, lock Breather pipe to bracket This item has been superceded by WS105090853 - see below	1
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	1	£0.25 Ex VAT @ 20% £0.21
A50	HN2008 CLICK FOR MORE INFO	Nut Breather pipe to bracket This item has been superceded by NP605081 - see below	1
	NP605081	NUT PLAIN 5/16 UNF	1	£0.17 Ex VAT @ 20% £0.14
A50A	510918	COMBUSTION HEAD ASSEMBLY 86 mm (Complete with valves and springs) Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only	1		No longer available
A50B	510919	COMBUSTION HEAD ASSEMBLY 83 mm (Complete with valves and springs) Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only	1		No longer available
A50C	512457	COMBUSTION HEAD ASSEMBLY 86 mm (Complete with valves and springs) Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future	1		No longer available
A50D	512458	COMBUSTION HEAD ASSEMBLY 83 mm (Complete with valves and springs) Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future	1		No longer available
A51	510084	COMBUSTION HEAD ASSEMBLY 86 mm (Less valves and springs) Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only	1		No longer available
A51A	510545	COMBUSTION HEAD ASSEMBLY 83 mm (Less valves and springs) Triumph Catalogue Remarks: Fitted up to Engine No. CT21470E only	1		No longer available
A51B	511695 CLICK FOR MORE INFO	COMBUSTION HEAD ASSEMBLY 86 mm (Less valves and springs) Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future Revington TR information: TR4A New cast iron cylinder head fully machined with unleaded seats and guides, but with no valves, springs, caps etc. ready to accept your own parts. Suitable for 86mm engines. Will also fit TR2-4 with suitable... READ MORE	1	£2661.10 Ex VAT @ 20% £2217.58	Available to order
A51C	511785 CLICK FOR MORE INFO	COMBUSTION HEAD ASSEMBLY 83 mm (Less valves and springs) Triumph Catalogue Remarks: Fitted from Engine No. CT21471E and future Revington TR information: 83mm head	1		No longer available
A51D	PS1603 CLICK FOR MORE INFO	Plug, core, top face of combustion head Revington TR information: This Core Plug is threaded. The thread is 1" UNF x 12TPI,	1	£6.96 Ex VAT @ 20% £5.80
A52	100792 CLICK FOR MORE INFO	Tube, sealing Revington TR information: These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads. We... READ MORE	8	£9.82 Ex VAT @ 20% £8.18	Available to order
A53	058923 CLICK FOR MORE INFO	Guide, valve Inlet Revington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE	4	£1.84 Ex VAT @ 20% £1.53
A54	108239 CLICK FOR MORE INFO	Guide, valve Exhaust Triumph Catalogue Remarks: Fitted up to Engine No. CT only Revington TR information: Standard steel exhaust Valve Guide fitted to TR2-4 up to CT27410. Suitable for valves having a shaft diameter of 3/8" (9.53mm), the guide has an outside diameter of 17/32" (13.49mm). The guide is 2.0625" long The... READ MORE	4	£9.96 Ex VAT @ 20% £8.30
A54A	058923 CLICK FOR MORE INFO	Guide, valve, exhaust Triumph Catalogue Remarks: Fitted from Engine No. CT and future Revington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE	4	£1.84 Ex VAT @ 20% £1.53
A54B	111913 CLICK FOR MORE INFO	Insert, valve seat Inlet	as req'd		No longer available
A54C	102941 CLICK FOR MORE INFO	Insert, valve seat Exhaust	as req'd		No longer available
A55	108242 CLICK FOR MORE INFO	Collar, exhaust valve guide Revington TR information: consider second hand original part 108242SH	4	£5.98 Ex VAT @ 20% £4.98	Available to order
A55A	027378 CLICK FOR MORE INFO	Plug, core, rear face of head	1	£2.18 Ex VAT @ 20% £1.82
A55B	114774 CLICK FOR MORE INFO	Plug (not required when heater is fitted) Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE	1	£5.87 Ex VAT @ 20% £4.89	Available to order
A55C	HU0953 CLICK FOR MORE INFO	Screw, set Fitted in cylinder head for rocker oil feed This item has been superceded by SH506031 - see below	1
	SH506031	SCREW HEX 3/8UNC X 3/8 INCH	1		No longer available
A55D	500464 CLICK FOR MORE INFO	Washer, copper Fitted in cylinder head for rocker oil feed This item has been superceded by WC10610080 - see below	1
	WC10610080	WASHER COPPER 3/8 X 5/8 X .080"	1	£1.81 Ex VAT @ 20% £1.51
A56	111717 CLICK FOR MORE INFO	Stud, rocker pedestal This item has been superceded by ST706251 - see below	4
	ST706251	STUD 3/8 X3-1/8" 1-1/8"UNF1/2"UNC	4	£3.85 Ex VAT @ 20% £3.21
A57	059011 CLICK FOR MORE INFO	Stud, rocker cover This item has been superceded by ST705301 - see below	2
	ST705301 CLICK FOR MORE INFO	STUD 5/16 X 3-3/4" 5/8UNF+1/2UNC Revington TR information: This stud is mainly used for holding the standard rocker cover on TR2-4A. If you have an aluminium rocker cover fitted then a slightly longer stud ST705341 will most likely be required. Consider also fitting kit... READ MORE	2	£4.26 Ex VAT @ 20% £3.55
A57A	058917 CLICK FOR MORE INFO	Stud, manifold attachment 1 15/16" long This item has been superceded by ST506152 - see below	1
	ST506152	STUD 3/8 X 1-15/16" UNC+ UNC	1	£4.68 Ex VAT @ 20% £3.90
A57B	058688 CLICK FOR MORE INFO	Stud, manifold attachment 1 11/16" long This item has been superceded by ST506132 - see below	1
	ST506132	STUD 3/8 X 1-11/16" UNC+ UNC	1	£2.21 Ex VAT @ 20% £1.84
A57C	102474 CLICK FOR MORE INFO	Stud, manifold attachment 2.06" long This item has been superceded by ST506162 - see below	4
	ST506162	STUD 3/8 X 2.06" UNC+ UNC	4	£2.63 Ex VAT @ 20% £2.19
A57D	107055 CLICK FOR MORE INFO	Stud, manifold attachment 2.38" long This item has been superceded by ST506191 - see below	2
	ST506191	STUD 3/8 X 2-3/8 UNC+ UNC	2	£4.18 Ex VAT @ 20% £3.48
A57E	DP0512 CLICK FOR MORE INFO	Dowel, manifold attachment This item has been superceded by DP514 - see below	2
	DP514	DOWEL 5/16 DIA X 7/8" LONG	2	£1.78 Ex VAT @ 20% £1.48
A58	205481 CLICK FOR MORE INFO	Gasket Between combustion head and cylinder block 86 mm Revington TR information: Should you require a complete head gasket set, order GEG178. .	1	£38.08 Ex VAT @ 20% £31.73
A58	202127 CLICK FOR MORE INFO	Gasket Between combustion head and cylinder block 83 mm Revington TR information: TR2 Head Gasket 83mm No longer available. Use 205481 or gasket set 505281.	1		No longer available
A59	208096 CLICK FOR MORE INFO	Plate, low compression - 86 mm Triumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio	1		No longer available
A60	202775 CLICK FOR MORE INFO	Gasket - 86mm Triumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio Revington TR information: TR2-4A Steel shim head gasket 87mm - 0.5mm (0.020") thick when compressed This Gasket can be shaped to suit 87-89mm liner diameters and can also be used on engines with 83 or 86mm liners. This gasket... READ MORE	1	£124.44 Ex VAT @ 20% £103.70	Available to order
A59	200906 CLICK FOR MORE INFO	Plate, low compression - 83 mm Triumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio	1		No longer available
A60	202775 CLICK FOR MORE INFO	Gasket - 83mm Triumph Catalogue Remarks: For use in countries where high octane fuel is unobtainable to provide a lower compression ratio Revington TR information: TR2-4A Steel shim head gasket 87mm - 0.5mm (0.020") thick when compressed This Gasket can be shaped to suit 87-89mm liner diameters and can also be used on engines with 83 or 86mm liners. This gasket... READ MORE	1	£124.44 Ex VAT @ 20% £103.70	Available to order
A61	110962 CLICK FOR MORE INFO	Nut Combustion head attatchment Revington TR information: 10 required	10	£2.94 Ex VAT @ 20% £2.45
A61A	WP0029 CLICK FOR MORE INFO	Washer, plain Combustion head attatchment This item has been superceded by WP108140753 - see below	10
	WP108140753	WASHER PLAIN 1/2" x 7/8" X 0.075" HARDENED Revington TR information: Hardened cylinder head stud attachment Washer ½" Internal diameter x 7/8" Outside diameter for underneath the cylinder head nut of TR2-TR4A and other engines with ½" diameter studs.	10	£3.12 Ex VAT @ 20% £2.60
A61B	121231 CLICK FOR MORE INFO	Eye, lifting, assembly front Revington TR information: lifting Eye, front of the engine, TR2-TR4A and any other car with a 4 cylinder TR or vanguard type engine. This part has been remanufactured to the original design in stainless steel and is supplied unpainted.... READ MORE	1	£60.80 Ex VAT @ 20% £50.67
A61C	121752 CLICK FOR MORE INFO	Bracket, lifting, rear Revington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH.	1	£17.04 Ex VAT @ 20% £14.20
A62	107626 CLICK FOR MORE INFO	Valve Inlet Revington TR information: Inlet Valve standard TR2-4A. We have good stock of second hand valves too for those wanting either a cheaper or an original part. in addition we have tow valves available with larger heads. ... READ MORE	4	£14.42 Ex VAT @ 20% £12.02
A63	108806 CLICK FOR MORE INFO	Valve Exhaust Triumph Catalogue Remarks: Fitted up to Engine No. CT only	4	£21.86 Ex VAT @ 20% £18.22
A63A	136567 CLICK FOR MORE INFO	Valve, exhaust Triumph Catalogue Remarks: Fitted from Engine No. CT and future Revington TR information: Exhaust Valve TR4late and TR4A, 32.89mm Head Diameter, 5/16" (7.94mm) shaft diameter. We have good stock of second hand valves too for those wanting either a cheaper or an original part. For larger valves, gas flowed,... READ MORE	4	£24.01 Ex VAT @ 20% £20.01
A64	107492 CLICK FOR MORE INFO	Spring, valve Outer	8	£5.90 Ex VAT @ 20% £4.92
A65	107493 CLICK FOR MORE INFO	Spring, valve Inner Revington TR information: Our stock are genuine Leyland parts	8	£3.66 Ex VAT @ 20% £3.05
A66	102564 CLICK FOR MORE INFO	Spring, auxiliary, fitted on exhaust valve Revington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an outer spring 149633 on all valves. Consider spring set RTR1175	4	£5.71 Ex VAT @ 20% £4.76
A67	105803 CLICK FOR MORE INFO	Collar, valve spring Revington TR information: TR2-4 valve spring Cap. As this part does not wear out, RevingtonTR prefer to supply original second hand parts which can be guaranteed to be the correct shape and material specification. Order 105803SH below. This part... READ MORE	8	£8.10 Ex VAT @ 20% £6.75	Available to order
A68	106663 CLICK FOR MORE INFO	Cone, split retaining, collar on valve Revington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half.	8 prs.	£4.03 Ex VAT @ 20% £3.36
A69	057933 CLICK FOR MORE INFO	VALVE TAPPET Revington TR information: Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.... READ MORE	8	£9.83 Ex VAT @ 20% £8.19	Available to order
A70	106968 CLICK FOR MORE INFO	PUSH ROD ASSEMBLY High comp. Revington TR information: Push Rod for TR2-4A for standard high compression engines. 257mm long. Consider second hand original part 106968SH or for competition use RTR1155. Various pushrod types were used in TR2-4A engines as follows: TR2-3B High compression 106968 Eng.... READ MORE	8	£23.94 Ex VAT @ 20% £19.95	Available to order
A70A	108616 CLICK FOR MORE INFO	PUSH ROD ASSEMBLY Low comp. Triumph Catalogue Remarks: Push rod assembly 108616 to be used in conjunction with compression plate number 208096 or 200906 in countries where high octane fuel is unobtainable. Revington TR information: Push rod, TR2-4A engine for use in low compression engines. When not available use second hand part 106968SH. listed here are all the push rods used throughout the production of TR2-4A engines. Various pushrod types... READ MORE	8		No longer available
A71	111064 CLICK FOR MORE INFO	ROCKER SHAFT Revington TR information: Consider tuftrided part RTR1103.	1	£49.22 Ex VAT @ 20% £41.02
A72	112545 CLICK FOR MORE INFO	Pedestal, rocker, drilled Revington TR information: Not available new singularly. Order second hand part 112545SH or new set 112545X. The non-drilled part is 112546SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE	1		No longer available
A73	042880 CLICK FOR MORE INFO	Screw, locking Pedestal to shaft	1		No longer available
A73A	052337 CLICK FOR MORE INFO	Washer, shakeproof Pedestal to shaft This item has been superceded by WK7607 - see below	1
	WK7607 CLICK FOR MORE INFO	LOCK WASHER CUPPED 1/4"	1	£0.94 Ex VAT @ 20% £0.78
A74	112546 CLICK FOR MORE INFO	Pedestal, rocker, plain Revington TR information: Not available new singularly. Order second hand part 112546SH or new set 112545X. The drilled part is 112545SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE	3		No longer available
A75	HN2009 CLICK FOR MORE INFO	Nut Rocker pedestal to combustion head This item has been superceded by NP606111 - see below	4
	NP606111	NUT PLAIN 3/8 UNF X 11/32" (STD)	4	£0.14 Ex VAT @ 20% £0.12
A76	WL0209 CLICK FOR MORE INFO	Washer, lock pedestal to combustion head Triumph Catalogue Remarks: Fitted up to Engine No. CT6039E only with steel Rocker Pedestals. Use WP009 with aluminium Rocker Pedestals This item has been superceded by WS106111243 - see below	4
	WS106111243	WASHER SPRING 3/8" RECT SECTION	4	£0.37 Ex VAT @ 20% £0.31
A76A	WP009 CLICK FOR MORE INFO	Washer, plain, rocker pedestal to combustion head Triumph Catalogue Remarks: Fitted from Engine No. CT6040E and future with aluminium Rocker Pedestals This item has been superceded by WP106121191 - see below	4
	WP106121191	WASHER PLAIN 3/8" x 3/4" x 0.119" HARDENED	4	£1.48 Ex VAT @ 20% £1.23
A77	108012 CLICK FOR MORE INFO	Rocker assembly No. 1	4	£18.50 Ex VAT @ 20% £15.42
A78	108014 CLICK FOR MORE INFO	Rocker assembly No. 2	4	£12.31 Ex VAT @ 20% £10.26
A78A	044370 CLICK FOR MORE INFO	Bush, rocker	16	£3.68 Ex VAT @ 20% £3.07
A79	109495 CLICK FOR MORE INFO	Screw, adjustment Fitted in rockers Revington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE	8	£7.02 Ex VAT @ 20% £5.85
A80	057110 CLICK FOR MORE INFO	Nut, lock Fitted in rockers This item has been superceded by 51K1178 - see below	8
	51K1178 CLICK FOR MORE INFO	LOCKNUT ROCKER ADJ. Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE	8	£0.65 Ex VAT @ 20% £0.54
A81	128074 CLICK FOR MORE INFO	Spring, rocker Centre	1		No longer available
A82	128075 CLICK FOR MORE INFO	Spring, rocker Intermediate Triumph Catalogue Remarks: Fitted up to Engine No. CT only	2		No longer available
A83	044630 CLICK FOR MORE INFO	Spring, rocker Outer This item has been superceded by WT11016 - see below	2
	WT11016	WASHER THACKERY 5/8 INCH Revington TR information: No longer available	2		No longer available
A83A	130481 CLICK FOR MORE INFO	Spring, rocker, intermediate Triumph Catalogue Remarks: Fitted from Engine No. CT and future	4		No longer available
A84	060733 CLICK FOR MORE INFO	Collar, on ends of shaft	2		No longer available
A85	058334 CLICK FOR MORE INFO	Pin (Mills) securing collar This item has been superceded by 500975 - see below	2
	500975 CLICK FOR MORE INFO	MILLS PIN 1/8"x1"	2	£0.76 Ex VAT @ 20% £0.63
A86	304677 CLICK FOR MORE INFO	ROCKER COVER ASSEMBLY Triumph Catalogue Remarks: Fitted up to Engine No. CT14233E only	1		No longer available
A87	113569 CLICK FOR MORE INFO	Cap, oil filler and breather assembly Triumph Catalogue Remarks: Fitted up to Engine No. CT14233E only Revington TR information: consider Second hand part 113569SH	1	£61.80 Ex VAT @ 20% £51.50	Available to order
A87A	305614 CLICK FOR MORE INFO	ROCKER COVER ASSEMBLY Triumph Catalogue Remarks: Fitted from Engine No. CT14234E and future Revington TR information: TR4 Rocker Cover, chrome with stem for breather cap and threaded boss in the centre of the upper face. Fitted from engine number CT14234E. Not available new, use second hand part 305614SH.	1		No longer available
A87B	113569 CLICK FOR MORE INFO	Cap, oil filler and breather Triumph Catalogue Remarks: Fitted from Engine No. CT14234E and future Revington TR information: consider Second hand part 113569SH	1	£61.80 Ex VAT @ 20% £51.50	Available to order
A87C	129077 CLICK FOR MORE INFO	Plug, breather pipe adaptor Triumph Catalogue Remarks: Fitted from Engine No. CT14234E and future Revington TR information: 1/2" UNF Blank For 5/8"UNF see 103222	1	£16.91 Ex VAT @ 20% £14.09
A87D	WF0511 CLICK FOR MORE INFO	Washer, fibre, breather pipe plug Triumph Catalogue Remarks: Fitted from Engine No. CT14234E and future This item has been superceded by WF10812062 - see below	1
	WF10812062	WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK	1	£0.70 Ex VAT @ 20% £0.58
A88	121219 CLICK FOR MORE INFO	Washer, joint, cover to combustion head Triumph Catalogue Remarks: Fitted from Engine No. CT14234E and future This item has been superceded by GEG437 - see below	1
	GEG437 CLICK FOR MORE INFO	GASKET ROCKER COVER TR2-4A Revington TR information: Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess.	1	£7.45 Ex VAT @ 20% £6.21
A89	YN2908 CLICK FOR MORE INFO	Nut, nyloc Rocker cover attachment This item has been superceded by NY605141 - see below	2
	NY605141	NYLOC 5/16 UNF X 7/16 THICK Revington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable.	2		No longer available
A90	WP0008 CLICK FOR MORE INFO	Washer, plain Rocker cover attachment This item has been superceded by WP10510075 - see below	2
	WP10510075	WASHER PLAIN 5/16" x 5/8" x 0.075"	2	£0.44 Ex VAT @ 20% £0.37
A91	WF0508 CLICK FOR MORE INFO	Washer, fibre Rocker cover attachment This item has been superceded by WF10510056 - see below	2
	WF10510056	WASHER FIBRE 5/16 I/D X 5/8 OD	2	£0.80 Ex VAT @ 20% £0.67

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR4 Plate A - ENGINE: CYLINDER BLOCK AND HEAD.

510914

510915

510924

DECARBONISING SET 86 mm

GEG178

505281

509827

SUPPLEMENTARY ENGINE GASKET SET (To be used in conjunction with Decarbonising Set for complete Engine strip)

GEG248

202817

CYLINDER BLOCK 86 mm

502363

Cap, bearing Front

Cap, bearing Centre

Cap, bearing Rear

058335

057121

101587

Washer, spring Bearing caps to block

WS108143133

056405

044473

056765

102785

500463

Washer, copper Oil gallery side

WC10711064

HU0954

Screw, set Oil gallery side

SH506041

500464

Washer, copper Oil gallery side

WC10610080

061478

WF0511

Washer, fibre, water drain tap

WF10812062

113570

121734

113169

106959

106960

V7318

Stud, oil pump attachment

ST705111

V7322

Stud, petrol pump attachment

ST705111

V7322

Stud, distributor pedestal attachment

ST705111

V7318

Stud, front engine plate and timing cover attachment

ST705111

DP0512

Dowel, locating front engine plate

DP514

V7318

Stud, gearbox attachment

ST705111

DP0612

Dowel, locating gearbox on rear face of cylinder block

DP619

112170

Stud Oil filter (pressure) attachment lower front

ST705171

DN3408

Nut, cap Oil filter (pressure) attachment lower front

14B2685

112233

Bolt, oil filter (pressure) attachment, upper front

BH505101

112231

Bolt, oil filter (pressure) attachment, upper rear

BH505321

112232

Bolt, oil filter (pressure) attachment, lower rear

BH505241