Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4 Plate E - ENGINE: OIL PUMP, INLET AND EXHAUST MANIFOLDS.
| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
E1AA | 200155 |
OIL PUMP ASSEMBLY |
1 |
£176.18 Ex VAT @ 20% |
|
|
E1 | 200156 |
BodyRevington TR information: This Oil Pump body is not available new , please use complete oil pump 200155 or secondhand part 200156SH. |
1 | ||
|
E2 | 504862 |
Rotor and spindle assembly (comprising Inner Rotor, Spindle, Peg, and Outer Rotor) |
1 |
£49.12 Ex VAT @ 20% |
|
|
E3 | 200157 |
Cover |
1 | ||
|
E4 | SPJC |
Bolt Cover to body |
4 | ||
|
E5 | WL0207 |
Washer, lock Cover to bodyThis item has been superceded by WS104070643 - see below |
4 | ||
|
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
4 |
£0.20 Ex VAT @ 20% |
||
|
E6 | 100682 |
Filter assembly |
1 |
£56.60 Ex VAT @ 20% |
|
|
E7 | HU0705 |
Screw Suction, oil filter to pump assemblyThis item has been superceded by SH604051 - see below |
2 | ||
|
SH604051 |
SCREW 1/4 UNF X 5/8 INCH |
2 |
£0.62 Ex VAT @ 20% |
||
|
ES | HN2007 |
Nut Suction, oil filter to pump assemblyThis item has been superceded by NP604071 - see below |
2 | ||
|
NP604071 |
NUT PLAIN 1/4 UNF X 7/32 |
2 |
£0.20 Ex VAT @ 20% |
||
|
E9 | WL0207 |
Washer, lock Suction, oil filter to pump assemblyThis item has been superceded by WS104070643 - see below |
2 | ||
|
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
2 |
£0.20 Ex VAT @ 20% |
||
|
E10 | 056282 |
Washer, joint, oil pump to cylinder head |
1 |
£0.98 Ex VAT @ 20% |
|
|
E11 | HN2008 |
Nut Securing oil pumpThis item has been superceded by NP605081 - see below |
3 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
3 |
£0.17 Ex VAT @ 20% |
||
|
E12 | WL0208 |
Washer, lock Securing oil pumpThis item has been superceded by WS105090853 - see below |
3 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
||
|
E13 | 304164 |
Manifold, exhaust |
1 | ||
|
E14 | 101442 |
Stud Exhaust pipe to manifoldThis item has been superceded by ST506122 - see below |
3 | ||
|
ST506122 |
STUD 3/8 X 1-1/2" UNC+ UNC |
3 |
£2.59 Ex VAT @ 20% |
||
|
E15 | 106958 |
Washer, joint Exhaust pipe to manifoldThis item has been superceded by GEG718 - see below |
1 | ||
|
GEG718 |
Down Pipe GASKET TR2-4 exhaustRevington TR information: Triangular gasket 53.5mm i/d 69.6mm hole centres |
1 |
£5.94 Ex VAT @ 20% |
||
|
E16 | 305547 |
Manifold, inletTriumph Catalogue Remarks: Fitted up to Engine No. CT16800E and from Engine No. CT16901 E up to CT only |
1 | ||
|
E16A | 305744 |
Manifold, inletTriumph Catalogue Remarks: Fitted from Engine No. CT16801E up to CT16900E and from CT- and future |
1 | ||
|
E16B | 118632 |
Plug, breather pipe holeTriumph Catalogue Remarks: Fitted from Engine No. CT14234E and future |
1 | ||
|
301815P |
PLUG CRANK SHAFT TR3-4A & 5-6Revington TR information: TR3-4A Plug shaft in crank. 1/2" long with a hex key slot. |
1 |
£2.58 Ex VAT @ 20% |
||
|
E17 | 112907 |
Stud Carburettor attachment Inlet exhaust to manifoldThis item has been superceded by ST605121 - see below |
8 | ||
|
ST605121 |
STUD 5/16 X 1-1/2" UNF+ UNF |
8 |
£1.92 Ex VAT @ 20% |
||
|
E18 | 112907 |
Stud Carburettor attachment Inlet exhaust to manifoldThis item has been superceded by ST605121 - see below |
2 | ||
|
ST605121 |
STUD 5/16 X 1-1/2" UNF+ UNF |
2 |
£1.92 Ex VAT @ 20% |
||
|
E19 | HN2008 |
Nut Inlet to exhaust manifoldThis item has been superceded by NP605081 - see below |
2 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
2 |
£0.17 Ex VAT @ 20% |
||
|
E20 | WL0208 |
Washer, spring Inlet to exhaust manifoldThis item has been superceded by WS105090853 - see below |
2 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
||
|
E21 | DP0308 |
Dowel, throttle control bracketTriumph Catalogue Remarks: Fitted up to Engine No. CT16800E and from Engine No. CT16901E up to CT- only |
1 | ||
|
DP308 |
DOWEL |
1 | |||
|
E22 | 113122 |
Gasket Inlet and exhaust manifolds to cylinder headRevington TR information: Standard inlet/exhaust gasket for TR3-4A high port head. Use 113122-1 if you are experiencing, or are likely to experience poor gasket sealing, typically if an extractor manifold is being used. Sold as a single gasket, 2... READ MORE |
2 |
£6.25 Ex VAT @ 20% |
|
|
E23 | 058258 |
Clamp Inlet and exhaust manifolds to cylinder head |
4 |
£9.31 Ex VAT @ 20% |
|
|
E24 | 033148 |
Clamp Inlet and exhaust manifolds to cylinder head |
2 |
£5.41 Ex VAT @ 20% |
|
|
E25 | 056675 |
Nut Inlet and exhaust manifolds to cylinder headThis item has been superceded by NP506151 - see below |
8 | ||
|
NP506151 |
NUT PLAIN 3/8 UNC 15/32" STEELRevington TR information: This is the original nut for the exhaust in steel on TR2, TR3,TR4. TR4A . If you want brass consider using long brass nut NP506242. . |
8 | |||
|
E26 | WL0209 |
Washer, lock Inlet and exhaust manifolds to cylinder headThis item has been superceded by WS106111243 - see below |
8 | ||
|
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
8 |
£0.37 Ex VAT @ 20% |
||
|
E27 | 112866 |
Washer, insulating, inlet manifold and carburettorThis item has been superceded by 148036 - see below |
2 | ||
|
148036 |
INSUL GASKETRevington TR information: Insulating gasket. This reproduction insulating gasket is made in solid plastic. |
2 |
£9.84 Ex VAT @ 20% |
||
|
E28 | 112867 |
Washer, joint, both sides of insulating washerRevington TR information: Gasket, carburettor to manifold, 1-3/4" SU. Whilst this is a TR3-4A number, it can be used on any car 1-3/4" SU carburettors. There are many numbers for this gasket with small variations, the main ones... READ MORE |
4 |
£1.34 Ex VAT @ 20% |
