Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4 Plate L - GEARBOX: CASING, TOP COVER AND MOUNTING.
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
L1AA | 510920 |
GEARBOX UNIT (less Gear Lever)Revington TR information: Not available new use our gearbox exchange/rebuild service detailed under part number G/BOXEX |
1 | |||
L1 | 304692 |
GEARBOX AND CLUTCH HOUSING |
||||
L2 | 036997 |
Bush, clutch shaft housing R.H.This item has been superceded by RTR1205 - see below |
||||
RTR1205 |
BUSH OILITE SLOTTED TR2-4Revington TR information: TR2-4 cross shaft bush slotted. Supersedes part number 036997. These bushes are longer than standard and are manufactured from Sintered Bronze, reducing cross shaft wear. Being longer than standard, the bearing will support a previously unused... READ MORE |
£12.98 Ex VAT @ 20% |
||||
L2A | 036998 |
Bush, clutch shaft housing L.H.This item has been superceded by RTR1204 - see below |
||||
RTR1204 |
BUSH OILITE X-SHAFT UPR. TR2/6Revington TR information: TR2-6 Cross Shaft Bush Uprated, replaces part number 036998 and part number 137651. These bushes are longer than standard and are manufactured from Sintered Bronze, reducing cross shaft wear. Being longer than standard, the bearing will... READ MORE |
£12.02 Ex VAT @ 20% |
||||
L2B | 060420 |
Plug, core, front end of gearbox |
1 | |||
L3 | 114774 |
Plug, oil level, in side of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
L4 | 114774 |
Plug, drain, in bottom of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
L5 | 100157 |
FRONT END COVERRevington TR information: TR2-6 Gearbox nose with 1.66" (42.61mm) diameter sliding section to accommodate standard 31.75mm (1.25") diameter input shaft and standard release carrier. Consider original second hand part number 100157SH or where necessary Triumph 2000/2500 gearbox Nose... READ MORE |
1 |
£63.24 Ex VAT @ 20% |
||
L6 | 060215 |
Seal, in front end coverThis item has been superceded by 141756 - see below |
1 | |||
141756 |
SEAL OIL GEARBOX FRONT TR2-6Revington TR information: Gearbox nose seal TR2-6 and all similar gearboxes, T2000, T2500, Dolomite, Stage ,etc. Our seal stock is genuine Leyland new old stock, not cheap reproductions. |
1 |
£14.42 Ex VAT @ 20% |
|||
L7 | 059537 |
Washer, joint Front end cover to gearboxRevington TR information: Consider gasket kit RTR1003 |
1 |
£1.39 Ex VAT @ 20% |
||
L8 | WU3857 |
Screw, wedglok Front end cover to gearboxThis item has been superceded by 155541 - see below |
4 | |||
155541 |
SETSCREW |
4 | ||||
L9 | 114034 |
Washer, plain Front end cover to gearboxThis item has been superceded by GHF362 - see below |
4 | |||
GHF362 |
WASHER COPPER OIL FEED TR2-4 |
4 | ||||
L10 | 055773 |
Cover, counter shaft end |
1 |
£10.01 Ex VAT @ 20% |
||
L11 | 055774 |
Gasket Countershaft end cover to gearbox |
1 |
£1.80 Ex VAT @ 20% |
||
L12 | 123888 |
Screw, wedglok Countershaft end cover to gearbox |
2 | |||
L13 | 114034 |
Washer, plain Countershaft end cover to gearboxThis item has been superceded by GHF362 - see below |
2 | |||
GHF362 |
WASHER COPPER OIL FEED TR2-4 |
2 | ||||
L14 | 305048 |
GEARBOX EXTENSIONRevington TR information: Gearbox extension ( none overdrive. Not available new, use 305048SH |
1 | |||
L15 | 058958 |
Seal, oil, rear of extensionThis item has been superceded by 146129 - see below |
1 | |||
146129 |
OIL SEAL REAR GEAR BOX & A TYPE O/D |
1 |
£12.26 Ex VAT @ 20% |
|||
L16 | 132465 |
Washer, paper Extension to gearbox |
1 |
£2.42 Ex VAT @ 20% |
||
L17 | HU0858 |
Screw, set Extension to gearbox |
5 | |||
L17A | HBO866 |
Bolt Extension to gearbox |
1 | |||
L18 | WL0208 |
Washer, lock Extension to gearbox |
6 | |||
L18A | 107749 |
SPEEDO DRIVEN GEAR AND BEARING ASSEMBLYRevington TR information: Consider part 146542 |
1 |
£126.67 Ex VAT @ 20% |
||
L19 | 058969 |
Gear, speedo drivenRevington TR information: Steel TR2-4A speedometer drive gear Not available new. Use 058969SH TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes... READ MORE |
1 | |||
L20 | 107747 |
Bearing, speedo driven gearRevington TR information: Brass speedometer drive bearing TR2-4A TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes without overdrive and 'A' type... READ MORE |
1 | |||
L21 | 060247 |
Seal, oil, between screwed end and bearing |
1 |
£6.00 Ex VAT @ 20% |
||
L22 | 060246 |
End, screwed |
1 |
£4.14 Ex VAT @ 20% |
||
L23 | 107750 |
Ring, sealThis item has been superceded by 147751 - see below |
1 | |||
147751 |
O RING |
1 |
£1.38 Ex VAT @ 20% |
|||
L24 | 107746 |
Screw, locking Bearing to extensionRevington TR information: Special Pinch Bolt holding the speedometer drive into the gearbox casing. Not available new. Use 107746SH or modify Screw SH505121 as described in 'More About This Part'. This special bolt has an overall length of... READ MORE |
1 | |||
L25 | WL0208 |
Washer, lock Bearing to extension |
1 | |||
L25B | 509852 |
TOP COVER ASSEMBLY |
1 | |||
L26 | 511027 |
Cover, top, complete with plugs |
1 | |||
L27 | 108114 |
Plug, fitted in cover |
3 |
£3.47 Ex VAT @ 20% |
||
L28 | 501258 |
Washer, copper, on plug |
3 | |||
L29 | 104449 |
Plug, welch Interlock aperture |
1 |
£1.90 Ex VAT @ 20% |
||
L30 | 104449 |
Plug, welch selector shafts |
3 |
£1.90 Ex VAT @ 20% |
||
L31 | 054505 |
Plug, welch in sides of top cover |
2 |
£2.39 Ex VAT @ 20% |
||
L32 | 128066 |
Shaft selector 1st and 2ndRevington TR information: Consider second hand original part 128066SH |
1 |
£21.47 Ex VAT @ 20% |
||
L33 | 129986 |
Shaft selector 3rd and top |
1 | |||
L34 | 132389 |
Shaft selector Reverse |
1 | |||
L35 | 127386 |
Selector 1st and 2ndRevington TR information: Selector 1st and 2nd. Not currently available new (July 2018) however we usually have second hand parts for sale |
1 | |||
L36 | 127385 |
Selector ReverseRevington TR information: Selector reverse. When not available new, order second hand part 127385SH |
1 |
£75.88 Ex VAT @ 20% |
||
L37 | 128067 |
Fork, selector 1st and 2ndRevington TR information: Fork Selector 1st and 2nd. Not available new however we usually have second hand parts for sale |
1 | |||
L38 | 127387 |
Fork, selector 3rd and topRevington TR information: Not currently available. use second hand part 127387SH |
1 | |||
L39 | 129780 |
Actuator, reverse |
1 |
£15.19 Ex VAT @ 20% |
||
L40 | 128063 |
Sleeve, 1st/2nd shaftRevington TR information: Tube on 1st and 2nd shaft 74.6mm long Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm long |
1 | |||
L41 | 117811 |
Sleeve, 3rd and top shaftRevington TR information: steel tube 3/4th speed change shaft TR4-6 gearbox top cover Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm... READ MORE |
1 |
£9.53 Ex VAT @ 20% |
||
L42 | 129779 |
Sleeve, reverse selector shaftRevington TR information: Tube on reverse shaft 50.4mm long. Our stock is genuine Leyland Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft... READ MORE |
1 |
£2.29 Ex VAT @ 20% |
||
L43 | 122653 |
Screw, taper, securing selectors and forks to shaft |
5 |
£7.14 Ex VAT @ 20% |
||
L44 | 106050 |
Ring, sealing, selector shaftThis item has been superceded by OR1008106 - see below |
3 | |||
OR1008106 |
'O' GEARBOX SEALING RING |
3 |
£0.95 Ex VAT @ 20% |
|||
L45 | 106051 |
Plate, cover, over sealing ring |
1 |
£7.94 Ex VAT @ 20% |
||
L46 | HU0704 |
Screw, set Cover plate to top cover |
2 | |||
L47 | WL0207 |
Washer, lock Cover plate to top cover |
2 | |||
L48 | 105788 |
Roller, interlock Fitted in top cover |
1 |
£4.58 Ex VAT @ 20% |
||
L49 | BLOO24 |
Ball, interlock Fitted in top cover |
2 | |||
L50 | BLOO24 |
Ball, selector shafts, forward gearsTriumph Catalogue Remarks: Fitted up to Commission No. CT9898 only |
2 | |||
L51 | 101236 |
Spring, ballTriumph Catalogue Remarks: Fitted up to Commission No. CT9898 only |
2 | |||
155632 |
SPRING BALL G/BOX SELECTION TR6 |
2 |
£4.25 Ex VAT @ 20% |
|||
L51A | BLOO24 |
Ball, selector shaft, 1st and 2nd gearTriumph Catalogue Remarks: Fitted from Commission No. CT9899 and future |
1 | |||
L51B | 101236 |
Spring, ballTriumph Catalogue Remarks: Fitted from Commission No. CT9899 and future |
1 | |||
155632 |
SPRING BALL G/BOX SELECTION TR6 |
1 |
£4.25 Ex VAT @ 20% |
|||
L51C | 106481 |
Plunger, selector shaft, 3rd and topTriumph Catalogue Remarks: Fitted from Commission No. CT9899 and future |
1 |
£17.56 Ex VAT @ 20% |
||
L51D | 106489 - |
Spring, plungerTriumph Catalogue Remarks: Fitted from Commission No. CT9899 and future |
1 | |||
L51E | 109401 |
Piece, distance, plungerTriumph Catalogue Remarks: Fitted from Commission No. CT9899 and future |
1 | |||
L52 | 132388 |
Plunger, reverse selector |
1 | |||
L53 | 106489 |
Spring, reverse plunger |
1 |
£1.04 Ex VAT @ 20% |
||
L54 | 109401 |
Piece, distance, selector shaft plunger-ReverseRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
L55 | 108166 |
Plug, retaining springRevington TR information: No longer available, we can however supply second hand parts 108166SH |
3 | |||
L56 | 105758 |
Washer, joint, top cover |
1 |
£1.73 Ex VAT @ 20% |
||
L57 | HBO873 |
Bolt |
2 | |||
L58 | HBOS71 |
Bolt Top cover attachment |
2 | |||
L59 | 056370 |
Screw, set Top cover attachment |
4 |
£3.80 Ex VAT @ 20% |
||
L60 | WL0208 |
Washer, lock Top cover attachment |
8 | |||
L61 | 131507 |
CHANGE SPEED LEVER ASSEMBLYRevington TR information: not available new use original second hand part number 131507SH. . There are 4 basic types of gear lever fitted to TR2-6, which are all interchangeable, provided the correct top cover and fixings are used.... READ MORE |
1 | |||
L62 | 112424 |
Plunger In ball end |
1 |
£5.98 Ex VAT @ 20% |
||
L63 | 037502 |
Spring In ball endThis item has been superceded by 122075 - see below |
1 | |||
122075 |
SPRING GEAR HUBRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
1 |
£2.33 Ex VAT @ 20% |
|||
L64 | 109531 |
Spring Fitted under capThis item has been superceded by 145796 - see below |
1 | |||
145796 |
SPRING UNDER G/L CAPRevington TR information: Spring gear lever, TR2-6CC/CP. Whilst this spring is unavailable, consider original second hand part number 145796SH. This spring had 6 coils and has an internal diameter of 16mm where the spring fits over the gear lever.... READ MORE |
1 | ||||
L65 | 112442 |
Retainer, spring Fitted under capRevington TR information: No longer vailable, use second hand part 112442SH |
1 | |||
L66 | 131246 |
KnobRevington TR information: Fitted up to CP53853 and now available new. This knob is a plain black sphere with no logo. Consider second hand part 131246SH or you can use part number 144095 but reverse is on the left... READ MORE |
1 |
£48.46 Ex VAT @ 20% |
||
L67 | 506157 |
Nut, jam |
1 | |||
L68 | 105787 |
Cap, change speed leverThis item has been superceded by 140816 - see below |
1 | |||
140816 |
CAP TOP COVER EARLY 3 HOLESRevington TR information: Not available new use second hand part 140816SH. |
1 | ||||
L69 | HU0703 |
Screw, set Cap to top cover |
1 | |||
L70 | WL0207 |
Washer, lock Cap to top cover |
1 | |||
L71 | HBO727 |
Bolt Lever to top cover |
1 | |||
L72 | TN3207 |
Nut, nyloc Lever to top cover |
1 | |||
L72A | 705913 |
Grommet, gear lever |
1 |
£20.70 Ex VAT @ 20% |
||
L72B | HU0858 |
Screw, set Gearbox to engine |
6 | |||
L72C | WL0208 |
Washer, lock Gearbox to engine |
6 | |||
L72D | HN2008 |
Nut Gearbox to engine |
3 | |||
L72E | WL0208 |
Washer, lock Gearbox to engine |
3 | |||
L73 | 121504 |
REAR ENGINE MOUNTINGThis item has been superceded by 104086 - see below |
1 | |||
104086 |
MOUNT GEARBOX TO CHASSIS TR2-6CPRevington TR information: This standard Mounting supporting the gearbox or overdrive is made with 55/60 shore hardness rubber. For competition or where significantly extra torque than standard is likely to be applied to the engine mountings use uprated part... READ MORE |
1 |
£21.62 Ex VAT @ 20% |
|||
L74 | 131711 |
Strap, anti-vibration Gearbox extension to top coverTriumph Catalogue Remarks: Fitted up to Commission No. CT17814 only |
1 | |||
L75 | 131690 |
Washer, spacing Gearbox extension to top coverRevington TR information: This spacer 1" outside diameter, 0.53" internal diameter and 1/4" thick is used to space anti-vibration Strap 131711 off the 'A' type gearbox mounting so that it will line up with the ... gear lever... READ MORE |
1 |
£2.41 Ex VAT @ 20% |
||
L76 | WM0093 |
Washer, plain Gearbox extension to top cover |
1 | |||
L76A | 132951 |
Strap, anti-vibrationTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76B | 132604 |
Weight and bush assembly, vibration damperTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76C | 132607 |
Clip, vibration damperTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76D | HB1024 |
Bolt Weight to clipTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76E | WM0069 |
Washer, plain Weight to clipTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76F | YN2910 |
Nut, nyloc Weight to clipTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
NY607171 |
NYLOC 7/16 UNF X 17/32" (.515")TALL 11/16"AF |
1 |
£1.49 Ex VAT @ 20% |
|||
L76G | 132608 |
Strap, vibration damperTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76H | HU0806 |
Screw, set Clip to strapsTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76I | HB0811 |
Bolt Clip to strapsTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
1 | |||
L76J | YN2908 |
Nut, nyloc Clip to strapsTriumph Catalogue Remarks: Fitted from Commission No. CT17815 and future |
2 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
2 | ||||
L77 | HB1112 |
Bolt Engine mounting to gear box extension |
1 | |||
L78 | HB1115 |
Bolt Engine mounting to gear box extension |
1 | |||
L79 | HN2011 |
Nut Engine mounting to gear box extension |
1 | |||
L80 | WL0211 |
Washer, lock Engine mounting to gear box extension |
2 | |||
L81 | HN2010 |
Nut Engine mounting to cross member |
2 | |||
L82 | WL0210 |
Washer, lock Engine mounting to cross member |
2 | |||
L83 | 112445 |
CLUTCH HOUSING COVERRevington TR information: No longer available new. Consider original second hand part number 112445SH. . |
1 | |||
L84 | HU0806 |
Setscrew Cover to gearbox |
2 | |||
L84A | HU0808 |
Setscrew Cover to gearbox |
2 | |||
L85 | HN2008 |
Nut Cover to gearbox |
4 | |||
L86 | WL0208 |
Washer, lock Cover to gearbox |
4 |