Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate A - 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 514659 |
ENGINE UNIT 86 mmTriumph Catalogue Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1BB | 514660 |
ENGINE UNIT 83 mmTriumph Catalogue Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1CC | 514659/R |
ENGINE UNIT 86 mm Recondition UnitTriumph Catalogue Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1DD | 514660/R |
ENGINE UNIT 83 mm Recondition UnitTriumph Catalogue Remarks: Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1EE | 514760 |
ENGINE UNIT 86 mmTriumph Catalogue Remarks: LOW COMPRESSION ENGINE. For use in countries where High Octane fuel is unobtainable. Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1FF | 514760/R |
ENGINE UNIT 86 mm Recondition UnitTriumph Catalogue Remarks: LOW COMPRESSION ENGINE. For use in countries where High Octane fuel is unobtainable. Note:-This unit is less Water Pump, Distributor, Dynamo, Petrol Pump, Oil Filter, Thermostat, Inlet and Exhaust Manifolds, Carburettors and Sparking Plugs. |
1 | |||
A1GG | 514744 |
DECARBONISING GASKET SET 86 mm |
1 | |||
A1HH | 514745 |
DECARBONISING GASKET SET 83 mm |
1 | |||
A1II | 514746 |
ENGINE GASKET SET 86 mm |
1 | |||
A1JJ | 514747 |
ENGINE GASKET SET 83 mm |
1 | |||
A1 | 502363 |
CYLINDER BLOCKRevington TR information: not available new, use second hand part 502363SH |
1 | |||
A2 | Cap, bearing FrontTriumph Catalogue Remarks: Not serviced |
|||||
A2A | Cap, bearing CentreTriumph Catalogue Remarks: Not serviced |
|||||
A3 | Cap, bearing RearTriumph Catalogue Remarks: Not serviced |
|||||
A4 | 058335 |
Packing, felt, rear bearing cap |
2 |
£6.31 Ex VAT @ 20% |
||
A5 | 057121 |
Screw, set Bearing caps to block |
6 |
£7.34 Ex VAT @ 20% |
||
A6 | 101587 |
Washer, spring Bearing caps to blockThis item has been superceded by WS108143133 - see below |
6 | |||
WS108143133 |
WASHER SPRING 1/2" RECT SECTION |
6 |
£0.16 Ex VAT @ 20% |
|||
A7 | 056405 |
Bush, oil pump drive shaftRevington TR information: use second hand part 056405SH |
1 | |||
A7A | 044473 |
Plug, core, rear of camshaft |
1 |
£3.22 Ex VAT @ 20% |
||
A7B | 056765 |
Plug, core, oil gallery endsRevington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE |
2 |
£8.04 Ex VAT @ 20% |
||
A8 | 102785 |
Screw, Set Oil gallery sideRevington TR information: May need to consider second hand. |
3 | |||
A9 | 500463 |
Washer, copper Oil gallery sideThis item has been superceded by WC10711064 - see below |
3 | |||
WC10711064 |
WASHER COPPER 7/16 x 11/16 x .064 |
3 |
£0.89 Ex VAT @ 20% |
|||
A9A | HU0954 |
Screw, set Oil gallery sideThis item has been superceded by SH506041 - see below |
1 | |||
SH506041 |
SCREW 3/8 UNC X 1/2 INCH |
1 |
£1.60 Ex VAT @ 20% |
|||
A9B | 500464 |
Washer, copper Oil gallery sideThis item has been superceded by WC10610080 - see below |
1 | |||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
1 |
£1.81 Ex VAT @ 20% |
|||
A10 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
||
A11 | WF0511 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
1 | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
1 |
£0.70 Ex VAT @ 20% |
|||
A11A | WF0525 |
Washer, fibre, water drain tapThis item has been superceded by WF10812062 - see below |
as req'd. | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
as req'd. |
£0.70 Ex VAT @ 20% |
|||
A12 | 113570 |
Stud, cylinder head attachment, front and centre of block - R.H. sideRevington TR information: 1/2"UNC |
2 |
£21.97 Ex VAT @ 20% |
||
A13 | 121734 |
Stud, cylinder head attachment; rear of block - R.H. side |
1 |
£36.85 Ex VAT @ 20% |
||
A14 | 113169 |
Stud, cylinder head attachment, adjacent to centre of cylinder head - R.H. side |
2 |
£19.90 Ex VAT @ 20% |
||
A15 | 106959 |
Stud, cylinder head attachment, front centre and rear of block - L.H. sideRevington TR information: Head stud for various applications from TR2 - TR4A |
3 |
£17.27 Ex VAT @ 20% |
||
A16 | 106960 |
Stud, cylinder head attachment, adjacent to centre of cylinder head - L.H. side |
2 |
£17.64 Ex VAT @ 20% |
||
A16A | V7318 |
Stud, oil pump attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A17 | V7322 |
Stud, petrol pump attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A18 | V7322 |
Stud, distributor pedestal attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A19 | V7318 |
Stud, front engine plate and timing cover attachmentThis item has been superceded by ST705111 - see below |
1 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
1 |
£1.38 Ex VAT @ 20% |
|||
A20 | DP0512 |
Dowel, locating front engine plateThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A21 | V7318 |
Stud, gearbox attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A22AA | DP0612 |
Dowel, locating gearbox on rear face of cylinder blockThis item has been superceded by DP619 - see below |
2 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
2 |
£3.00 Ex VAT @ 20% |
|||
A22 | 112170 |
Stud Oil filter (pressure) attachment lower frontThis item has been superceded by ST705171 - see below |
1 | |||
ST705171 |
STUD 5/16 UNC/UNF2-1/8 |
1 |
£2.47 Ex VAT @ 20% |
|||
A22A | DN3408 |
Nut, cap Oil filter (pressure) attachment lower frontThis item has been superceded by 14B2685 - see below |
1 | |||
14B2685 |
NUT DOME 5/16 UNF CHROME |
1 |
£2.39 Ex VAT @ 20% |
|||
A23 | 112233 |
Bolt, oil filter (pressure) attachment, upper frontThis item has been superceded by BH505101 - see below |
1 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
1 |
£1.22 Ex VAT @ 20% |
|||
A24 | 112231 |
Bolt, oil filter (pressure) attachment, upper rearThis item has been superceded by BH505321 - see below |
1 | |||
BH505321 |
BOLT 5/16 UNC X 4 INCH |
1 |
£4.18 Ex VAT @ 20% |
|||
A25 | 112232 |
Bolt, oil filter (pressure) attachment, lower rearThis item has been superceded by BH505241 - see below |
1 | |||
BH505241 |
BOLT 5/16 UNC X 3 INCH |
1 |
£2.28 Ex VAT @ 20% |
|||
A25A | WL0208 |
Washer, lock, fitted on boltsThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A26 | 055810 |
FRONT SEALING BLOCKRevington TR information: Sealing block, front of engine Tr2-4A. Consider original second hand part 055810SH |
1 | |||
A27 | 059381 |
Pad, sealing, in ends of block |
2 |
£1.21 Ex VAT @ 20% |
||
A28 | 056574 |
Screw, sealing block attachment |
2 |
£2.05 Ex VAT @ 20% |
||
A29 | 060862 |
REAR OIL SEAL ASSEMBLYRevington TR information: This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The reverse scroll... READ MORE |
1 |
£87.40 Ex VAT @ 20% |
||
A30 | HU0755 |
Screw, set Oil seal to cylinder blockThis item has been superceded by SH504051 - see below |
8 | |||
SH504051 |
SCREW 1/4 UNC X 5/8" |
8 |
£0.42 Ex VAT @ 20% |
|||
A30A | WL0207 |
Washer, spring Oil seal to cylinder blockThis item has been superceded by WS104070643 - see below |
8 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
8 |
£0.20 Ex VAT @ 20% |
|||
A31 | 122166 |
CYLINDER LINER (Graded F, G, H) 86 mm EngineRevington TR information: Liner 86mm. Standard Sizes up to plus +60 available |
4 |
£99.71 Ex VAT @ 20% |
||
A32 | 112789 |
Gasket, liner 86 mm EngineRevington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE |
2 |
£3.79 Ex VAT @ 20% |
||
A31 | 105539 |
CYLINDER LINER (Graded F, G, H) 83 mm EngineRevington TR information: Liners 83mm Standard Sizes up to +40 available |
4 |
£104.11 Ex VAT @ 20% |
||
A32 | 112789 |
Gasket, liner 83 mm EngineRevington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE |
2 |
£3.79 Ex VAT @ 20% |
||
A33 | 304711 |
FRONT ENGINE PLATERevington TR information: the pin is 056763 |
1 | |||
A34 | 056389 |
Washer, joint Engine plate attachment to cylinder block |
1 |
£2.24 Ex VAT @ 20% |
||
A34A | HU0856 |
Screw, set Engine plate attachment to cylinder blockThis item has been superceded by SH505061 - see below |
5 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
5 |
£0.90 Ex VAT @ 20% |
|||
A34B | WL0208 |
Washer, spring Engine plate attachment to cylinder blockThis item has been superceded by WS105090853 - see below |
5 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
5 |
£0.25 Ex VAT @ 20% |
|||
A35 | 130985 |
FRONT ENGINE MOUNTINGRevington TR information: This round engine mounting was fitted to TR4. The square type part number 143057 was fitted to TR4A. The parts are however interchangeable. |
2 |
£19.15 Ex VAT @ 20% |
||
A36 | HN2009 |
Nut Mounting to engine plate and frameThis item has been superceded by NP606111 - see below |
4 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
4 |
£0.14 Ex VAT @ 20% |
|||
A37 | WL0209 |
Washer, lock Mounting to engine plate and frameThis item has been superceded by WS106111243 - see below |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
A37A | 134234 |
Washer, packing Mounting to engine plate and frameThis item has been superceded by WP106381571 - see below |
2 | |||
WP106381571 |
WASHER DIFF MOUNT 3/8" X 2-3/8" X 0.157"Revington TR information: Revington TR recommend using Stainless Steel Washer WP106381572 |
2 |
£3.46 Ex VAT @ 20% |
|||
REAR ENGINE MOUNTING (For details see Gear Box Section) |
||||||
A38 | 115350 |
OIL SUMP ASSEMBLYRevington TR information: Consider alloy sump 301318 or second hand part 115350SH |
1 | |||
A39 | 211123 |
Washer, joint, between sump and cylinder blockRevington TR information: This is a thinner paper gasket that is more suitable for this application. If you have a joint which is irregular or not flat maybe try 211123-1 which is a cork gasket. Should you require a complete... READ MORE |
1 |
£4.60 Ex VAT @ 20% |
||
A40 | 114774 |
Plug, oil drainRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A41 | 100749 |
Screw, set Sump to cylinder blockThis item has been superceded by SH505061 - see below |
16 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
16 |
£0.90 Ex VAT @ 20% |
|||
A41A | HU0855 |
Screw, set Sump to front sealing block |
1 | |||
A41B | 105220 |
Screw, set Slave cylinder stay to sump and cylinder blockThis item has been superceded by BH505101 - see below |
2 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
2 |
£1.22 Ex VAT @ 20% |
|||
A42 | WL0208 |
Washer, lock, on set screwsThis item has been superceded by WS105090853 - see below |
19 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
19 |
£0.25 Ex VAT @ 20% |
|||
A43 | 102139 |
DipstickRevington TR information: Consider also 102139SH and 102139SHPC |
1 |
£31.63 Ex VAT @ 20% |
||
A44 | 032307 |
Washer, felt |
1 |
£1.82 Ex VAT @ 20% |
||
A45 | 132924 |
Plug, closing, breather pipe aperture |
1 |
£4.84 Ex VAT @ 20% |
||
A46 | 514748 |
COMBUSTION HEAD ASSEMBLY (Complete with valves and springs) 86 mmRevington TR information: TR4A New cast iron cylinder head with unleaded seats, built up with valves, springs, caps etc. ready to fit. Suitable for 86mm engines. Will also fit TR2-4 with suitable manifolds and gaskets. We also supply this... READ MORE |
1 |
£2888.80 Ex VAT @ 20% |
||
A46A | 514749 |
COMBUSTION HEAD ASSEMBLY (Complete with valves and springs) 83 mm |
1 | |||
A46B | 511695 |
COMBUSTION HEAD ASSEMBLY (Less valves and springs) 86 mmRevington TR information: TR4A New cast iron cylinder head fully machined with unleaded seats and guides, but with no valves, springs, caps etc. ready to accept your own parts. Suitable for 86mm engines. Will also fit TR2-4 with suitable... READ MORE |
1 |
£2661.10 Ex VAT @ 20% |
||
A46C | 511785 |
COMBUSTION HEAD ASSEMBLY (Less valves and springs) 83 mmRevington TR information: 83mm head |
1 | |||
A46D | PS1603 |
Plug, core, top face of combustion headRevington TR information: This Core Plug is threaded. The thread is 1" UNF x 12TPI, |
1 |
£6.96 Ex VAT @ 20% |
||
A47 | 100792 |
Tube, sealingRevington TR information: These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads. We... READ MORE |
8 | |||
A48 | 058923 |
Guide, valve InletRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
4 |
£1.84 Ex VAT @ 20% |
||
A49 | 058923 |
Guide, valve ExhaustRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
4 |
£1.84 Ex VAT @ 20% |
||
A49A | 111913 |
Insert, valve seat Inlet |
as req'd. | |||
A49B | 102941 |
Insert, valve seat Exhaust |
as req'd. | |||
A49C | 027378 |
Plug, core, rear face of headTriumph Catalogue Remarks: Fitted up to Engine No. only |
1 |
£2.18 Ex VAT @ 20% |
||
A49D | 144648 |
Plug, core, rear face of headTriumph Catalogue Remarks: Fitted from Engine No. and future |
1 |
£2.29 Ex VAT @ 20% |
||
A49E | 114774 |
Plug, (not required when heater is fitted)Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A49F | HU0953 |
Screw, set Fitted in cylinder head for rocker oil feedThis item has been superceded by SH506031 - see below |
1 | |||
SH506031 |
SCREW HEX 3/8UNC X 3/8 INCH |
1 | ||||
A49G | 500464 |
Washer, copper Fitted in cylinder head for rocker oil feedThis item has been superceded by WC10610080 - see below |
1 | |||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
1 |
£1.81 Ex VAT @ 20% |
|||
A50 | 111717 |
Stud, rocker pedestalThis item has been superceded by ST706251 - see below |
4 | |||
ST706251 |
STUD 3/8 X3-1/8" 1-1/8"UNF1/2"UNC |
4 |
£3.85 Ex VAT @ 20% |
|||
A51 | 059011 |
Stud, rocker coverThis item has been superceded by ST705301 - see below |
2 | |||
ST705301 |
STUD 5/16 X 3-3/4" 5/8UNF+1/2UNCRevington TR information: This stud is mainly used for holding the standard rocker cover on TR2-4A. If you have an aluminium rocker cover fitted then a slightly longer stud ST705341 will most likely be required. Consider also fitting kit... READ MORE |
2 |
£4.26 Ex VAT @ 20% |
|||
A51A | 058917 |
Stud, manifold attachment 1 15/16" longThis item has been superceded by ST506152 - see below |
1 | |||
ST506152 |
STUD 3/8 X 1-15/16" UNC+ UNC |
1 |
£4.68 Ex VAT @ 20% |
|||
A51B | 058688 |
Stud, manifold attachment 1 11/16" longThis item has been superceded by ST506132 - see below |
1 | |||
ST506132 |
STUD 3/8 X 1-11/16" UNC+ UNC |
1 |
£2.21 Ex VAT @ 20% |
|||
A51C | 102474 |
Stud, manifold attachment 2.06' longThis item has been superceded by ST506162 - see below |
4 | |||
ST506162 |
STUD 3/8 X 2.06" UNC+ UNC |
4 |
£2.63 Ex VAT @ 20% |
|||
A51D | 107055 |
Stud, manifold attachment 2.38' longThis item has been superceded by ST506191 - see below |
2 | |||
ST506191 |
STUD 3/8 X 2-3/8 UNC+ UNC |
2 |
£4.18 Ex VAT @ 20% |
|||
A51E | DP0512 |
Dowel, manifold attachmentThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A52 | 205481 |
Gasket Between combustion head and cylinder block 86 mmRevington TR information: Should you require a complete head gasket set, order GEG178. . |
1 |
£38.08 Ex VAT @ 20% |
||
A52 | 202127 |
Gasket Between combustion head and cylinder block 83 mmRevington TR information: TR2 Head Gasket 83mm No longer available. Use 205481 or gasket set 505281. |
1 | |||
A52A | 208096 |
Plate, low compression-86 mmTriumph Catalogue Remarks: For use in countries where High Octane fuel is unobtainable |
1 | |||
A52B | 202775 |
Gasket, low compression plate-86 mmTriumph Catalogue Remarks: For use in countries where High Octane fuel is unobtainable |
1 |
£124.44 Ex VAT @ 20% |
||
A53 | 110962 |
Nut Combustion Head attachmentRevington TR information: 10 required |
10 |
£2.94 Ex VAT @ 20% |
||
A54 | WP0029 |
Washer, pialn Combustion Head attachmentThis item has been superceded by WP108140753 - see below |
10 | |||
WP108140753 |
WASHER PLAIN 1/2" x 7/8" X 0.075" HARDENEDRevington TR information: Hardened cylinder head stud attachment Washer ½" Internal diameter x 7/8" Outside diameter for underneath the cylinder head nut of TR2-TR4A and other engines with ½" diameter studs. |
10 |
£3.12 Ex VAT @ 20% |
|||
A54A | 121231 |
Eye, lifting, assembly, frontRevington TR information: lifting Eye, front of the engine, TR2-TR4A and any other car with a 4 cylinder TR or vanguard type engine. This part has been remanufactured to the original design in stainless steel and is supplied unpainted.... READ MORE |
1 |
£60.80 Ex VAT @ 20% |
||
A54B | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A54C | WL0033 |
Washer, plain, lifting eyeThis item has been superceded by WL33 - see below |
1 | |||
WL33 |
[WL33] |
1 | ||||
VALVES |
||||||
A55 | 107626 |
Valve InletRevington TR information: Inlet Valve standard TR2-4A. We have good stock of second hand valves too for those wanting either a cheaper or an original part. in addition we have tow valves available with larger heads. ... READ MORE |
4 |
£14.42 Ex VAT @ 20% |
||
A56 | 136567 |
Valve ExhaustRevington TR information: Exhaust Valve TR4late and TR4A, 32.89mm Head Diameter, 5/16" (7.94mm) shaft diameter. We have good stock of second hand valves too for those wanting either a cheaper or an original part. For larger valves, gas flowed,... READ MORE |
4 |
£24.01 Ex VAT @ 20% |
||
A57 | 142135 |
Spring, valve OuterRevington TR information: Singular valve springs are now not available separately. Please order car set RTR1148 |
8 | |||
A58 | 142136 |
Spring, valve InnerRevington TR information: Singular valve springs are now not available separately. Please order car set RTR1148 |
8 | |||
A59 | 142137 |
Collar, valve springRevington TR information: TR4A valve spring Cap. As this part does not wear out, RevingtonTR prefer to supply original second hand part 142137SH which can be guaranteed to be the correct shape and material specification. Alternatively we... READ MORE |
8 |
£8.38 Ex VAT @ 20% |
||
A60 | 106663 |
Cone, split, retaining collar on valveRevington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
8 prs. |
£4.03 Ex VAT @ 20% |
||
A61 | 057933 |
VALVE TAPPETRevington TR information: Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.... READ MORE |
8 |
£9.83 Ex VAT @ 20% |
||
A62 | 106968 |
PUSH ROD ASSEMBLYRevington TR information: Push Rod for TR2-4A for standard high compression engines. 257mm long. Consider second hand original part 106968SH or for competition use RTR1155. Various pushrod types were used in TR2-4A engines as follows: TR2-3B High compression 106968 Eng.... READ MORE |
8 |
£23.94 Ex VAT @ 20% |
||
A62A | 108616 |
PUSH ROD (To be used in conjunction with Compression Plate 208096 in countries where High Octane fuel is unobtainable)Revington TR information: Push rod, TR2-4A engine for use in low compression engines. When not available use second hand part 106968SH. listed here are all the push rods used throughout the production of TR2-4A engines. Various pushrod types... READ MORE |
8 | |||
A63 | 111064 |
ROCKER SHAFTRevington TR information: Consider tuftrided part RTR1103. |
1 |
£49.22 Ex VAT @ 20% |
||
A64 | 112545 |
Pedestal, rocker, drilledRevington TR information: Not available new singularly. Order second hand part 112545SH or new set 112545X. The non-drilled part is 112546SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
1 | |||
A65 | 042880 |
Screw, locking, pedestal to shaft |
1 | |||
A66 | 112546 |
Pedestal, rocker, plainRevington TR information: Not available new singularly. Order second hand part 112546SH or new set 112545X. The drilled part is 112545SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
3 | |||
A67 | HN2009 |
Nut, rocker pedestal to combustion headThis item has been superceded by NP606111 - see below |
4 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
4 |
£0.14 Ex VAT @ 20% |
|||
A68 | WP009 |
Washer, plain, rocker pedestal to combustion headThis item has been superceded by WP106121191 - see below |
4 | |||
WP106121191 |
WASHER PLAIN 3/8" x 3/4" x 0.119" HARDENED |
4 |
£1.48 Ex VAT @ 20% |
|||
A69 | 108012 |
Rocker assembly No.1 |
4 |
£18.50 Ex VAT @ 20% |
||
A70 | 108014 |
Rocker assembly No. 2 |
4 |
£12.31 Ex VAT @ 20% |
||
A70A | 044370 |
Bush, rocker |
16 |
£3.68 Ex VAT @ 20% |
||
A71 | 109495 |
Screw, adjustment Fitted in rockersRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
8 |
£7.02 Ex VAT @ 20% |
||
A72 | 057110 |
Nut, lock Fitted in rockersThis item has been superceded by 51K1178 - see below |
8 | |||
51K1178 |
LOCKNUT ROCKER ADJ.Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE |
8 |
£0.65 Ex VAT @ 20% |
|||
A73 | 128074 |
Spring, rocker CentreRevington TR information: use second hand spring128074SH |
1 | |||
A74 | 130481 |
Spring, rocker Intermediate |
2 | |||
A75 | 044630 |
Spring, rocker OuterThis item has been superceded by WT11016 - see below |
2 | |||
WT11016 |
WASHER THACKERY 5/8 INCHRevington TR information: No longer available |
2 | ||||
A75 | 044630 |
Spring, rocker OuterThis item has been superceded by WT11016 - see below |
2 | |||
WT11016 |
WASHER THACKERY 5/8 INCHRevington TR information: No longer available |
2 | ||||
A76 | 060733 |
Collar, on ends of shaft |
2 | |||
A77 | 058334 |
Pin, (Mills), securing collarThis item has been superceded by 500975 - see below |
2 | |||
500975 |
MILLS PIN 1/8"x1" |
2 |
£1.63 Ex VAT @ 20% |
|||
A78 | 306527 |
ROCKER COVER ASSEMBLYRevington TR information: Rocker cover, TR4A with Twist oil fitter cap and breather pipe. This part is not available new. Consider a second hand part 306527SH or a rechromed part 306527RCEX. |
1 | |||
A79 | 143393 |
Cap, oil fillerThis item has been superceded by GRC126 - see below |
1 | |||
GRC126 |
RAD CAP |
1 |
£6.24 Ex VAT @ 20% |
|||
A80 | 121219 |
Washer, joint, cover to combustion headThis item has been superceded by GEG437 - see below |
1 | |||
GEG437 |
GASKET ROCKER COVER TR2-4ARevington TR information: Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess. |
1 |
£7.45 Ex VAT @ 20% |
|||
A81 | YN2908 |
Nut, nyloc Rocker cover attachmentThis item has been superceded by NY605141 - see below |
2 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
2 | ||||
A82 | WP0008 |
Washer, plain Rocker cover attachmentThis item has been superceded by WP10510075 - see below |
2 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
2 |
£0.44 Ex VAT @ 20% |
|||
A83 | WF0508 |
Washer, fibre Rocker cover attachmentThis item has been superceded by WF10510056 - see below |
2 | |||
WF10510056 |
WASHER FIBRE 5/16 I/D X 5/8 OD |
2 |
£0.80 Ex VAT @ 20% |