Suspension and steering
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate S - FRONT SUSPENSION AND FRONT HUBS.
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
S1AA | 307503 |
FRONT SUSPENSION UNIT Bolt on Disc Wheels R.H. |
1 | |||
S1BB | 307504 |
FRONT SUSPENSION UNIT Bolt on Disc Wheels L.H. |
1 | |||
S1CC | 514241 |
FRONT SUSPENSION UNIT Centre Lock, Wire Wheels R.H. |
1 | |||
S1DD | 514242 |
FRONT SUSPENSION UNIT Centre Lock, Wire Wheels L.H. |
1 | |||
The above units comprise:-Upper Wishbone, Top Inner Fulcrum, Vertical Link, Stub Axle, Hub, Brake Unit, Tie Rod Lever, Bottom Trunnion, Lower Wish bone Arms and Lower Inner Fulcrum Brackets |
||||||
S1 | 200659 |
UPPER FULCRUM PIN-INNERRevington TR information: We prefer not to sell this part loose, as it is easy to fit the wrong way round. New parts are No Longer Available (NLA). We sell 200659SHK, which includes a fitting instruction. Consider also second... READ MORE |
2 | |||
S2A | 013599 |
Screw, set Top inner fulcrum pin to chassis frame |
8 | |||
S2B | WL0209 |
Washer, spring Top inner fulcrum pin to chassis frameThis item has been superceded by WS106111243 - see below |
8 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
8 |
£0.37 Ex VAT @ 20% |
|||
S2 | 133504 |
UPPER WISHBONE ARM ASSEMBLY - FRONTRevington TR information: Consider also second hand part 133504SH or second hand part powder coated 133504SHPC |
2 |
£74.96 Ex VAT @ 20% |
||
S3 | 133507 |
UPPER WISHBONE ARM ASSEMBLY- REARRevington TR information: Consider also second hand part 133507SH or second hand part powder coated 133507SHPC |
2 |
£74.96 Ex VAT @ 20% |
||
S4 | 102228 |
Bush, rubber Wishbone to fulcrum pinRevington TR information: Upper inner front suspension wishbone bush, rubber TR2-6, also lower inner bush TR2-3. Our stock is genuine Leyland manufacture, the rubber is therefore significantly higher quality than aftermarket reproduction products. We offer a Superpro Polyurethane improved... READ MORE |
8 |
£3.13 Ex VAT @ 20% |
||
S5 | WM0069 |
Washer, plain Wishbone to fulcrum pinThis item has been superceded by WP10722110 - see below |
4 | |||
WP10722110 |
WASHER PLAIN 7/16 X 1-3/8 X .110 |
4 |
£1.76 Ex VAT @ 20% |
|||
S6 | LN2210 |
Nut, slotted Wishbone to fulcrum pinThis item has been superceded by NC607121 - see below |
4 | |||
NC607121 |
NUT CASTLE 7/16UNF x3/8"-11/16"AF |
4 |
£2.09 Ex VAT @ 20% |
|||
S7 | P00010 |
Pin, cotter Wishbone to fulcrum pinThis item has been superceded by PS106071 - see below |
4 | |||
PS106071 |
PIN SPLIT 3/32" X 7/8" |
4 |
£0.54 Ex VAT @ 20% |
|||
S8 | 142394 |
Ball joint assembly, upper wishboneThis item has been superceded by GSJ131 - see below |
2 | |||
GSJ131 |
TOP BALL JOINT TR4-6 - High ArticulationRevington TR information: High quality Top Ball Joint (TBJ) with maximum articulation. This part is a must for high performance cars, particularly TR2-4 with 3° caster and adjustable upper fulcrums fitted. The origin Stanpart/Leyland TBJ had 32°of articulation. This... READ MORE |
2 |
£90.92 Ex VAT @ 20% |
|||
S9 | 138509 |
Gaiter, between ball joint and vertical link |
2 |
£9.89 Ex VAT @ 20% |
||
S10 | 138869 |
Clip, gaiterRevington TR information: This ring secures the gaiter on GSJ131 ball joint. As it is not available Revington TR recommend using lock wire. We can supply this by the meter RTR5285-16 or a full drum RTR5285-16M |
2 | |||
S11 | 501024 |
Nipple, grease, in top of ball jointThis item has been superceded by RTR5080 - see below |
2 | |||
RTR5080 |
GREASE NIPPLE 1/4 UNF 45 DEGREERevington TR information: 1/4" UNF 45º |
2 |
£1.60 Ex VAT @ 20% |
|||
S12 | 112347 |
Bolt Ball joint assembly to upper wishbone arm assemblyThis item has been superceded by BH606211 - see below |
4 | |||
BH606211 |
BOLT 3/8 UNF X 2-5/8 INCH |
4 |
£2.87 Ex VAT @ 20% |
|||
S13 | YN2909 |
Nut, nyloc Ball joint assembly to upper wishbone arm assemblyThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
S14 | WP0045 |
Washer, plain Ball joint assembly to upper wishbone arm assemblyThis item has been superceded by WP10612075 - see below |
4 | |||
WP10612075 |
WASHER PLAIN 3/8 X 3/4 TABLE3Revington TR information: Washer Plain stands Table 3. in applications where a hardened washer is needed (rocker pedestal attachment for instance) us WP009 |
4 |
£0.42 Ex VAT @ 20% |
|||
S15 | 307215 |
VERTICAL LINK R.H.Revington TR information: Consider original second hand part number 307215SH. . |
1 |
£191.36 Ex VAT @ 20% |
||
S16 | 307216 |
VERTICAL LINK L.H. |
1 |
£191.36 Ex VAT @ 20% |
||
S17 | YN2911 |
Nut, nyloc, thin Vertical link to ball jointThis item has been superceded by NY608191 - see below |
2 | |||
NY608191 |
NYLOC 1/2 UNF X 19/32 INCH |
2 |
£1.08 Ex VAT @ 20% |
|||
S17A | WP0011 |
Washer, plain Vertical link to ball jointThis item has been superceded by WP10818093 - see below |
2 | |||
WP10818093 |
WASHER PLAIN 1/2 X 1-1/8 INCH OD |
2 |
£0.58 Ex VAT @ 20% |
|||
S18 | 307211 |
Lever, tie rod R.H.Revington TR information: Consider original second hand part 307211SH, or original second hand part powder coated black 307211SHPC. |
1 | |||
S18A | 307212 |
Lever, tie rod L.H.Revington TR information: Consider original second hand part 307212SH or original second hand part powder coated black 307212SHPC |
1 | |||
S18 | 133499 |
Plate, mounting, disc brake caliper R.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133499SH or second hand part powder coated black 133499SHPC. |
1 | |||
S19 | 133500 |
Plate, mounting, disc brake caliper L.H.Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133500SH or second hand part powder coated black 133500SHPC |
1 | |||
S20 | 118324 |
Bolt Mounting plates to vertical link |
2 |
£4.58 Ex VAT @ 20% |
||
521 | 113144 |
Bolt Mounting plates to vertical linkThis item has been superceded by SH606061 - see below |
2 | |||
SH606061 |
SCREW 3/8 UNF X 3/4 INCH |
2 |
£1.08 Ex VAT @ 20% |
|||
S22 | 106641 |
Washer, tab Mounting plates to vertical link |
4 |
£2.76 Ex VAT @ 20% |
||
S23 | YN2909 |
Nut, nyloc Mounting plates to vertical linkThis item has been superceded by NY606151 - see below |
2 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
2 |
£0.71 Ex VAT @ 20% |
|||
S24 | 113143 |
Bolt Tie rod levers and mounting plates to vertical linkThis item has been superceded by BH606231 - see below |
2 | |||
BH606231 |
BOLT 3/8 UNF X 2-7/8 INCHRevington TR information: HT Steel Hex bolt |
2 |
£2.51 Ex VAT @ 20% |
|||
S25 | 112032 |
Bolt Tie rod levers and mounting plates to vertical linkThis item has been superceded by BH606281 - see below |
2 | |||
BH606281 |
BOLT 3/8 UNF X 3-1/2 INCH |
2 |
£2.14 Ex VAT @ 20% |
|||
S26 | 107106 |
Piece, distance Tie rod levers and mounting plates to vertical linkRevington TR information: This spacer is 24 mm long. Consider also second hand part 107106SH or second hand part powder coated black 107106SHPC. |
4 |
£4.25 Ex VAT @ 20% |
||
S27 | YN2909 |
Nut, nyloc Tie rod levers and mounting plates to vertical linkThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
S27A | WP0045 |
Washer, plain Dust cover to vertical linkThis item has been superceded by WP10612075 - see below |
2 | |||
WP10612075 |
WASHER PLAIN 3/8 X 3/4 TABLE3Revington TR information: Washer Plain stands Table 3. in applications where a hardened washer is needed (rocker pedestal attachment for instance) us WP009 |
2 |
£0.42 Ex VAT @ 20% |
|||
S27B | TN3209 |
Nut, nyloc Dust cover to vertical linkThis item has been superceded by NY606121 - see below |
2 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
2 |
£1.44 Ex VAT @ 20% |
|||
S28 | 115763 |
STUB AXLE |
2 |
£36.31 Ex VAT @ 20% |
||
S29 | WP0011 |
Washer, plain Stub axle to vertical linkThis item has been superceded by WP10818093 - see below |
2 | |||
WP10818093 |
WASHER PLAIN 1/2 X 1-1/8 INCH OD |
2 |
£0.58 Ex VAT @ 20% |
|||
S30 | TN3211 |
Nut, thin, nyloc Stub axle to vertical linkThis item has been superceded by NY608151 - see below |
2 | |||
NY608151 |
NUT NYLOCK 1/2UNF X 15/32" deepRevington TR information: This nut is 0.468" tall and is to the correct spec. Other nuts of this number may not be to this specification. |
2 |
£2.17 Ex VAT @ 20% |
|||
S31 | 107194 |
Seal, oil assemblyThis item has been superceded by GHS110 - see below |
2 | |||
GHS110 |
OIL SEAL FRONT HUB TR2-6Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE |
2 |
£4.49 Ex VAT @ 20% |
|||
S31A | 100667 |
Seal, feltThis item has been superceded by GHS110 - see below |
1 | |||
GHS110 |
OIL SEAL FRONT HUB TR2-6Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE |
1 |
£4.49 Ex VAT @ 20% |
|||
S31B | 100868 |
Retainer, felt sealThis item has been superceded by GHS110 - see below |
1 | |||
GHS110 |
OIL SEAL FRONT HUB TR2-6Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE |
1 |
£4.49 Ex VAT @ 20% |
|||
S32 | 100573 |
Bearing, inner, front hubThis item has been superceded by GHB111 - see below |
2 | |||
GHB111 |
BEARING FR HUB TR2-6 INNERRevington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. see... READ MORE |
2 |
£20.27 Ex VAT @ 20% |
|||
S33 | 114284 |
Hub Assembly, frontTriumph Catalogue Remarks: For use with disc wheels only |
2 |
£260.47 Ex VAT @ 20% |
||
S34 | 114282 |
Stud, wheelTriumph Catalogue Remarks: For use with disc wheels only |
8 |
£6.53 Ex VAT @ 20% |
||
S35 | 114283 |
Hub assembly, frontTriumph Catalogue Remarks: For use with wire wheels only |
2 | |||
114284 |
Hub Assembly, frontRevington TR information: TR3-6 (and TR2 when disc brakes have been fitted) Steel front hub. This hub, which weighs 2.262Kg, is not particularly good value when the aluminium equivalent is cheaper and lighter, order 114284AL. Second hand steel hubs,... READ MORE |
2 |
£260.47 Ex VAT @ 20% |
|||
S36 | 114281 |
Stud, wheelTriumph Catalogue Remarks: For use with wire wheels only |
8 |
£6.66 Ex VAT @ 20% |
||
S36A | 202446 |
Extension hub, R.H.Triumph Catalogue Remarks: For use with wire wheels only |
1 | |||
217602 |
HUB ADAPTOR RH WIRE WHEELRevington TR information: consider second hand parts 217602SH and 217603SH |
1 | ||||
S37 | 202447 |
Extension hub, L.H.Triumph Catalogue Remarks: For use with wire wheels only |
1 | |||
217603 |
HUB ADAPTOR LH WIRE WHEEL TR3-6Revington TR information: consider second hand parts 217602SH and 217603SH |
1 |
£89.35 Ex VAT @ 20% |
|||
S38 | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: For use with wire wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
S39 | 100536 |
Bearing, outerThis item has been superceded by GHB110 - see below |
2 | |||
GHB110 |
BEARING FR HUB TR2-6 OUTERRevington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE |
2 |
£20.27 Ex VAT @ 20% |
|||
S40 | 102690 |
Washer, 'D' Front hub to stub axle |
2 |
£5.09 Ex VAT @ 20% |
||
S41 | LN2211 |
Nut, slotted Front hub to stub axleRevington TR information: Some nuts are too thick and do not fit under the cap. We have sourced the correct height nut that fits correctly. |
2 |
£4.38 Ex VAT @ 20% |
||
S42 | PCA020 |
Pin, cotter Front hub to stub axle |
2 | |||
S43 | 102689 |
Cap, grease retainingRevington TR information: Grease cap. consider second hand part 102689SH |
2 |
£7.48 Ex VAT @ 20% |
||
S43A | 142377 |
BOTTOM TRUNNION ASSEMBLY R.H.Revington TR information: consider second hand part 142377SH For the trunnion seal kits see Superpro polyurethane kits below. |
£112.52 Ex VAT @ 20% |
|||
S44 | 142378 |
BOTTOM TRUNNION ASSEMBLY R.H.Revington TR information: consider second hand part 142378SH For the trunnion seal kits see Superpro polyurethane kit below. |
£112.52 Ex VAT @ 20% |
|||
S45 | 142403 |
Stop, steering lockThis item has been superceded by 156111 - see below |
2 | |||
156111 |
LOCKSTOP TR4A-6Revington TR information: TR4A-6 Front Suspension lock stop. This stop is 20.56mm diameter, 14.2mm tall with an 8mm mounting hole. For wider wishbones and problems with trunnion bolts touching the discs, use Part Number 156111-22, a similar part 22mm... READ MORE |
2 |
£5.99 Ex VAT @ 20% |
|||
S46 | HU0811 |
Screw, set Stop to trunnionThis item has been superceded by SH605111 - see below |
2 | |||
SH605111 |
SCREW 5/16 UNF X 1-3/8 INCH |
2 |
£2.46 Ex VAT @ 20% |
|||
S47 | WL0222 |
Washer, lock Stop to trunnionThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
S48 | 056934 |
Nipple, grease |
2 |
£2.41 Ex VAT @ 20% |
||
S49 | 142402 |
Seal, oil, between trunnion and vertical linkRevington TR information: Use the Superpro polyurethane version SPF2253K for longer life. |
2 | |||
S50 | 307210 |
LOWER WISHBONE ARM ASSEMBLY-FRONT R.H. and REAR LH.Revington TR information: Consider also second hand part 307210SH or second hand part powder coated 307210SHPC |
2 |
£111.76 Ex VAT @ 20% |
||
S51 | 307209 |
LOWER WISHBONE ARM ASSEMBLY-FRONT L H. and REAR R. H.Revington TR information: TR4A-6 Lower Wishbone, left hand front and right hand back. Original part Leyland packaged. Consider also second hand part 307209SH or second hand part powder coated 307209SHPC |
2 |
£108.49 Ex VAT @ 20% |
||
S52 | 139835 |
Bolt, pivot Lower trunnion to lower wishbone |
2 |
£9.80 Ex VAT @ 20% |
||
S53 | 139832 |
Piece, distance Lower trunnion to lower wishboneRevington TR information: Our stock of this sleeve is genuine British Leyland or stainless steel part 139832SS. Consider also trunnion bush kit FSK6TK, two required per car |
4 |
£10.55 Ex VAT @ 20% |
||
S54 | 139833 |
Bearing, nylon Lower trunnion to lower wishboneRevington TR information: This nylon bush is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too. |
8 |
£5.36 Ex VAT @ 20% |
||
S55 | 142388 |
Washer, backing Lower trunnion to lower wishboneRevington TR information: This washer is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too.... READ MORE |
8 |
£2.66 Ex VAT @ 20% |
||
S56 | 142387 |
Ring, sealing Lower trunnion to lower wishboneRevington TR information: This ring is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available too. |
8 |
£3.12 Ex VAT @ 20% |
||
S57 | 139834 |
Shield, water Lower trunnion to lower wishboneRevington TR information: This shield is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available... READ MORE |
8 |
£2.27 Ex VAT @ 20% |
||
S58 | LN2212 |
Nut Lower trunnion to lower wishboneThis item has been superceded by NC609151 - see below |
2 | |||
NC609151 |
NUT CASTLE 9/16UNF x 15/32"- 7/8"AF |
2 |
£5.59 Ex VAT @ 20% |
|||
S59 | P00012 |
Pin, cotter Lower trunnion to lower wishboneThis item has been superceded by PS108091 - see below |
2 | |||
PS108091 |
PIN SPLIT 1/8 X 1-1/8 |
2 |
£0.26 Ex VAT @ 20% |
|||
S60 | 139715 |
Bracket assembly, lower fulcrum, innerRevington TR information: use 139715SH as not available new |
4 | |||
S61 | 141481 |
Bush Lower wishbone to mounting bracketRevington TR information: Superpro Polyurethane kit SPF0288K offers a much improved ride and considerably longer life. We also have 141481UK, which is a Nylatron kit |
4 |
£2.78 Ex VAT @ 20% |
||
S62 | HB1121 |
Bolt Lower wishbone to mounting bracketThis item has been superceded by BH608221 - see below |
4 | |||
BH608221 |
BOLT 1/2 UNF X 2-3/4 INCH |
4 |
£2.80 Ex VAT @ 20% |
|||
S63 | YN2911 |
Nut, nylon Lower wishbone to mounting bracketThis item has been superceded by NY608191 - see below |
4 | |||
NY608191 |
NYLOC 1/2 UNF X 19/32 INCH |
4 |
£1.08 Ex VAT @ 20% |
|||
S64 | 139727 |
Shim Bracket to chassis frameRevington TR information: Shim adjusting, steel, front suspension TR4A-6. Revington suggest as an alternative, you use second hand part 139727SH or stainless steel part 139727SH . |
as req'd. |
£6.16 Ex VAT @ 20% |
||
S65 | YN2909 |
Nut, nyloc Bracket to chassis frameThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
S66 | WM0059 |
Washer, plain Bracket to chassis frameThis item has been superceded by WP10614075 - see below |
4 | |||
WP10614075 |
WASHER PLAIN 3/8 ID X 7/8 OD X 0.075" TAB4 |
4 |
£0.43 Ex VAT @ 20% |
|||
S67 | 140951 |
LOWER SPRING PAN ASSEMBLYRevington TR information: This part is no longer available new. Please order second hand part 140951SH or powder coated second hand part 140951SHPC |
2 | |||
S67A | 101961 |
Screw, retaining rebound abutment bracketThis item has been superceded by BH606181 - see below |
8 | |||
BH606181 |
BOLT 3/8 UNF X 2-1/4 INCH |
8 |
£0.56 Ex VAT @ 20% |
|||
S68 | HB0916 |
Bolt Spring pan assembly to lower wishboneThis item has been superceded by BH606161 - see below |
8 | |||
BH606161 |
BOLT 3/8 UNF X 2 INCH |
8 |
£0.89 Ex VAT @ 20% |
|||
S69 | 143712 |
Stud Spring pan assembly to lower wishboneThis item has been superceded by ST606121 - see below |
8 | |||
ST606121 |
STUD 3/8 X 1-1/2" UNF+ UNF |
8 |
£2.09 Ex VAT @ 20% |
|||
S70 | YN2909 |
Nut, nyloc Spring pan assembly to lower wishboneThis item has been superceded by NY606151 - see below |
12 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
12 |
£0.71 Ex VAT @ 20% |
|||
S71 | WP0020 |
Washer, plain Spring pan assembly to lower wishboneThis item has been superceded by WP10610057 - see below |
12 | |||
WP10610057 |
WASHER PLAIN 3/8 X 5/8 X 0.057" |
12 |
£0.65 Ex VAT @ 20% |
|||
S72 | 211648 |
FRONT ROAD SPRING (Coil) 'Short'This item has been superceded by 213165PR - see below |
2 | |||
213165PR |
SPRING PAIR TR4A-6 FRONT STANDARDRevington TR information: This is a standard spring, supplied in pairs. When fitted to a standard weight TR4A with wheels fitted which have a 300mm rolling radius, the ground clearance will be 170mm. A TR4A with 21316PR springs... READ MORE |
2 |
£80.40 Ex VAT @ 20% |
|||
S72A | 144910 |
Piece, packing, on top of front road springTriumph Catalogue Remarks: Fitted from Comm. No. CTC59836 to Comm. No - Note:-Packing piece 144910 to be used with road spring 211648 only. Front road spring 213165 may be used for all replacements. |
2 | |||
S72B | 213165 |
FRONT ROAD SPRING (Coil) 'Long'Triumph Catalogue Remarks: Fitted from Comm. No - and future |
2 |
£40.80 Ex VAT @ 20% |
||
S73 | 100751 |
Washer, rubber, both ends of springRevington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. . |
4 | |||
S74 | 107682 |
Piece, packing, between spring and abutmentRevington TR information: Consider second hand part 107682SH |
2 |
£37.37 Ex VAT @ 20% |
||
S75 | 100751 |
Washer, rubber, over packing pieceRevington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. . |
2 | |||
S76 | 139703 |
FRONT SHOCK ABSORBERThis item has been superceded by GSA272 - see below |
||||
GSA272 |
DAMPER FRONT TR4A-6 eachRevington TR information: Standard front damper TR4A-6. Please call for more information on this damper before ordering. Consider second hand dampers, we have a stock of good used parts GSA272SH Uprated version is RTR3008 |
£23.77 Ex VAT @ 20% |
||||
S76A | 143355 |
FRONT SHOCK ABSORBER-ADJUSTABLETriumph Catalogue Remarks: Special orders only |
2 | |||
S77 | 119450 |
Rubber, mounting LowerRevington TR information: Superpro Polyurethane offer an improved kit whic lasts much longer than rubber. Please see SPF0476K below |
2 | |||
S78 | 142444 |
Rubber, mounting UpperThis item has been superceded by 21A860 - see below |
4 | |||
21A860 |
TOP damper BUSHRevington TR information: Superpro Polyurethane offer an improved kit please see SPF0809K |
4 |
£3.56 Ex VAT @ 20% |
|||
S79 | 140416 |
Washer Shock absorber upper attachmentRevington TR information: Flat washer 7/16" internal diameter, 1-5/8" external diameter, 0.164" thick Can use stainless steel washer WP107261572 or cupped washer TBC |
2 |
£1.55 Ex VAT @ 20% |
||
S80 | 140479 |
Washer Shock absorber upper attachmentThis item has been superceded by WP10626164 - see below |
2 | |||
WP10626164 |
WASHER PLAIN 3/8 X 1-5/8 X .164 |
2 |
£1.44 Ex VAT @ 20% |
|||
S81 | HN2009 |
Nut Shock absorber upper attachmentThis item has been superceded by NP606111 - see below |
2 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
2 |
£0.14 Ex VAT @ 20% |
|||
S82 | JN2109 |
Nut, jam Shock absorber upper attachmentThis item has been superceded by NP606071 - see below |
2 | |||
NP606071 |
NUT PLAIN 3/8 UNF X 7/32" |
2 |
£0.56 Ex VAT @ 20% |
|||
S83 | 106843 |
Bracket, shock absorberRevington TR information: Lower damper support plain (without tube) fitted to TR2-6. Consider second hand part 106843SH or second hand part powder coated black 106843SHPC. TR2-4 utilise a cover bracket 106844 below this part to act on the rebound... READ MORE |
4 |
£12.80 Ex VAT @ 20% |
||
S84 | HB1019 |
Bolt Shock absorber to Fulcrum bracketsThis item has been superceded by BH607191 - see below |
2 | |||
BH607191 |
BOLT 7/16UNF x 2-3/8" |
2 |
£2.66 Ex VAT @ 20% |
|||
S85 | JN3210 |
Nut, nyloc Shock absorber to Fulcrum brackets |
2 | |||
S86 | HN2009 |
Nut Fulcrum brackets to spring panThis item has been superceded by NP606111 - see below |
8 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
8 |
£0.14 Ex VAT @ 20% |
|||
S87 | WL0209 |
Washer, lock Fulcrum brackets to spring panThis item has been superceded by WS106111243 - see below |
8 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
8 |
£0.37 Ex VAT @ 20% |