Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR5 Plate N - GEARBOX: MAINSHAFT, CONSTANT PINION SHAFT, COUNTERSHAFT AND REVERSE GEAR
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
N1AA | 208052 |
MAINSHAFTTriumph Catalogue Remarks: Overdrive only |
1 |
£248.92 Ex VAT @ 20% |
||
N1 | 208051 |
MAINSHAFTRevington TR information: Gearbox Mainshaft. No Longer Available, use 208051SH |
1 | |||
N2 | 116496 |
Washer, between 1st gear and bearing |
1 |
£43.81 Ex VAT @ 20% |
||
N3 | 058391 |
Bearing, main shaft, centreRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
||
N4 | 058955 |
Circlip, locating bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
||
N5 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
||
N6 | 059443 |
Washer, between circlip and bearingRevington TR information: This washer sits between the rear bearing and the retaining circlip in TR2-3B gearbox. Not available new. Use second hand part 059443SH Parts 058949 and 059443 are very similar however 058949 won't fit on the... READ MORE |
1 | |||
N7 | 058949 |
Washer Mainshaft, rearRevington TR information: Washer mainshaft TR2-3B gearbox. Not available new. Use second hand part 058949SH Parts 058949 and 059443 are very similar however 058949 won't fit on the mainshaft adjacent to the rear main bearing. Technical information: - ... READ MORE |
1 | |||
N8 | SP75G |
Bearing Mainshaft, rearRevington TR information: Remove circlip when using in a Lockheed axle application. |
1 |
£18.70 Ex VAT @ 20% |
||
N9 | 058948 |
Flange, mainshaftRevington TR information: Square Gearbox/Overdrive output flange. TR2-6 all non-overdrive gearboxes and all 'A' type overdrive gearboxes up to Gearbox number CD15651 with O/D number 22/61953. Not available new. Consider second hand part 058948SH or the interchangeable later TR6... READ MORE |
1 | |||
N10 | 057868 |
Nut, slotted Flange to mainshaftRevington TR information: see also 057868SH |
1 |
£6.78 Ex VAT @ 20% |
||
N11 | WP0024 |
Washer, plain Flange to mainshaft |
1 |
£1.03 Ex VAT @ 20% |
||
N12 | P00012 |
Pin, split Flange to mainshaftThis item has been superceded by PS108091 - see below |
1 | |||
PS108091 |
PIN SPLIT 1/8 X 1-1/8 |
1 |
£0.26 Ex VAT @ 20% |
|||
N13 | 128100 |
Gear, 1st speedThis item has been superceded by 152770 - see below |
1 | |||
152770 |
1ST GEAR TR6Revington TR information: This 1st speed gear also fits TR4-5. We have good stock of very usable second hand parts. |
1 |
£61.21 Ex VAT @ 20% |
|||
N14 | 129940 |
Bush, 1st speed |
1 |
£49.69 Ex VAT @ 20% |
||
N15 | 129941 |
Washer, between 1st gear and mainshaft-118"Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
A/R |
£11.50 Ex VAT @ 20% |
||
N15 | 129942 |
Washer, between 1st gear and mainshaft--121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
A/R |
£12.07 Ex VAT @ 20% |
||
N15 | 129943 |
Washer, between 1st gear and mainshaft--124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
A/R |
£14.26 Ex VAT @ 20% |
||
N15 | 129944 |
Washer, between 1st gear and mainshaft--127"Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
A/R |
£14.36 Ex VAT @ 20% |
||
N16 | 515650 |
Hub, synchro, assembly, 1st and 2ndThis item has been superceded by 153843 - see below |
1 | |||
153843 |
SYNCHRO HUB 1st & 2nd TR6Revington TR information: Not available new please consider second hand part 153843SH. |
1 | ||||
N17 | 122075 |
Spring Fitted in 1st and 2nd synchro hubRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
||
N18 | BL0016 |
Ball Fitted in 1st and 2nd synchro hubThis item has been superceded by BLS108 - see below |
3 | |||
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
|||
N19 | 113431 |
Cup, synchro, 1st and 2ndRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
||
N20 | 105629 |
Gear, 2nd speedRevington TR information: 2nd Gear with 33 teeth used on all cars TR2-6 up to approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160” This gear has 3 oil holes from the bore... READ MORE |
1 |
£169.06 Ex VAT @ 20% |
||
N21 | 129939 |
Bush, 2nd speed gear |
1 | |||
N22 | 129941 |
Washer, between 2nd gear and mainshaft--.118"Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
A/R |
£11.50 Ex VAT @ 20% |
||
N22 | 129942 |
Washer, between 2nd gear and mainshaft--.121"Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
A/R |
£12.07 Ex VAT @ 20% |
||
N22 | 129943 |
Washer, between 2nd gear and mainshaft--.124"Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
A/R |
£14.26 Ex VAT @ 20% |
||
N22 | 129944 |
Washer, between 2nd gear and mainshaft--.127"Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
A/R |
£14.36 Ex VAT @ 20% |
||
N23 | 105630 |
Gear, 3rd speed |
1 |
£160.54 Ex VAT @ 20% |
||
N24 | 129940 |
Bush, in 3rd speed gear |
1 |
£49.69 Ex VAT @ 20% |
||
N25 | 132220 |
Washer Retaining 3rd speed gear on mainshaft |
1 | |||
N26 | 055707 |
Circlip Retaining 3rd speed gear on mainshaft |
1 | |||
N27 | 509649 |
Sleeve, synchro and operating, assemblyRevington TR information: Hub assembly TR250, 5 and early TR6. Not available new use 509649SH Third gear hub assemblies fitted to 4 synchro boxes up to CC/CP TR6 are part numbered 509649, and later cars CR/CF TR6 part number... READ MORE |
1 | |||
N28 | 122075 |
Spring, 3rd and topRevington TR information: This number is ok for the synchro hub but use 106388 below for the gear lever. |
3 |
£2.33 Ex VAT @ 20% |
||
N29 | BL0016 |
BallThis item has been superceded by BLS108 - see below |
3 | |||
BLS108 |
BALLBEARING 1/4 inch DIA |
3 |
£2.41 Ex VAT @ 20% |
|||
N30 | 113431 |
Cup, synchro, 3rd and topRevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
2 |
£43.60 Ex VAT @ 20% |
||
N31 | 148949CPS |
CONSTANT PINION SHAFTRevington TR information: This is part of 148949 order this if required |
1 | |||
N32 | 145008 |
Bearing, needle roller, pinion shaftRevington TR information: USED WITH THE BIG NOSE MAINSHAFT UP TO G/BOX NO CD20281 1.1/8" O.D fitted to 3A-4-4A.5 in gear 148949 |
1 |
£25.78 Ex VAT @ 20% |
||
N33 | 060658 |
Thrower, oil, constant pinion |
1 |
£2.27 Ex VAT @ 20% |
||
N34 | 058391 |
Bearing, ballRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
||
N35 | 058955 |
Circlip, securing bearing in casing |
1 |
£5.52 Ex VAT @ 20% |
||
N36 | 058956 |
Circlip, retaining bearing on shaft |
1 |
£1.38 Ex VAT @ 20% |
||
N37 | 060078 |
Washer, bearing |
1 |
£1.10 Ex VAT @ 20% |
||
N38 | 128105 |
COUNTERSHAFT |
£43.80 Ex VAT @ 20% |
|||
N39 | 128107 |
Gear, countershaft, 1st and reverseRevington TR information: First and reverse gear countershaft. consider using our uprated version 128107UREX or 128107URNEW. 128107UR comes with bearings First gear has 16 teeth and is 53.4mm diameter. Fitted up to CC89816 Later cars used UKC662 post CC89817 which... READ MORE |
1 | |||
N40 | 140508 |
Gear, countershaft, 2nd speed |
1 |
£111.50 Ex VAT @ 20% |
||
N41 | 140509 |
Gear, countershaft, 3rd speed |
1 |
£99.85 Ex VAT @ 20% |
||
N42 | 059456 |
Piece, distance, between 3rd and constant gear |
1 |
£24.25 Ex VAT @ 20% |
||
N43 | 148949GC |
Gear, constantRevington TR information: Part of 148949 if required then order this. |
1 | |||
N43A | 150339 |
Bearing, needle cage, rear of countershaftRevington TR information: TR5 and TR6 open caged bearing For TR4 bearing see 126862 below. ForTR2and TR3 see 058088 below. |
1 |
£6.44 Ex VAT @ 20% |
||
N44 | 145301 |
Bearing, needle, front of countershaftThis item has been superceded by 150339 - see below |
1 | |||
150339 |
Bearing, needle cage, rear of countershaftRevington TR information: TR5 and TR6 open caged bearing For TR4 bearing see 126862 below. ForTR2and TR3 see 058088 below. |
1 |
£6.44 Ex VAT @ 20% |
|||
N45 | 147749 |
Circlip, retaining bearing in countershaft |
2 |
£1.76 Ex VAT @ 20% |
||
N46 | 129955 |
Washer, thrust, front of countershaft |
1 |
£11.59 Ex VAT @ 20% |
||
N47 | 129956 |
Washer, thrust, rear of countershaft |
1 |
£17.39 Ex VAT @ 20% |
||
N48 | 129937 |
REVERSE SPINDLE |
1 |
£38.39 Ex VAT @ 20% |
||
N49 | 128110 |
Wheel, reverse, assembly |
1 |
£151.31 Ex VAT @ 20% |
||
N50 | 129862 |
Bush, reverse wheel |
1 |
£11.74 Ex VAT @ 20% |
||
N51 | 129954 |
Screw, wedglok Countershaft and reverse shaft to gearbox rear of countershaft |
1 |
£2.87 Ex VAT @ 20% |
||
N52 | 129938 |
Plate, locking Countershaft and reverse shaft to gearbox rear of countershaft |
1 |
£8.47 Ex VAT @ 20% |
||
N53 | 129894 |
REVERSE OPERATING LEVER ASSEMBLY |
1 | |||
N54 | 106448 |
Pin, fulcrum, fitted in gearbox |
1 | |||
N55 | TN3209 |
Nut Fulcrum pin to gearboxThis item has been superceded by NY606121 - see below |
1 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
1 |
£1.44 Ex VAT @ 20% |
|||
N56 | WP0036 |
Washer, plain Fulcrum pin to gearboxThis item has been superceded by WP10610057 - see below |
1 | |||
WP10610057 |
WASHER PLAIN 3/8 X 5/8 X 0.057" |
1 |
£0.65 Ex VAT @ 20% |