Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CC Plate A - ENGINE (Carburettor Model): Block and Sump
Also in this listing
Engine Unit 8.6 : 1, Short Engine, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Oil Pressure Adjustment Details, Oil Pump Assembly, Dipstick Assembly, Front Engine Plate, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure SwitchPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 516794 |
ENGINE UNIT 8.6 : 1 Ratio (Carburettor Model only)Triumph Catalogue Remarks: Note:- The above units are less water pump, distributor, alternator, petrol pump, oil filter, thermostat, inlet and exhaust manifolds, carburettors and sparking plugs. Fitted up to Engine CP.75000 |
1 | |||
A1AB | 516794/R |
ENGINE UNIT 8.6 : 1 Ratio (Carburettor Model only) RECONDITIONED UNITTriumph Catalogue Remarks: Note:- The above units are less water pump, distributor, alternator, petrol pump, oil filter, thermostat, inlet and exhaust manifolds, carburettors and sparking plugs. Fitted up to Engine CP.75000 |
1 | |||
A1AC | UKC0560 |
SHORT ENGINETriumph Catalogue Remarks: Note:- The above units comprise of Cylinder Block, Crankshaft, Pistons, Connecting Rods, Bearings and Acilliary Attachments Details. Fitted from CC.75001 |
1 | |||
UKC560 |
SHORT ENGINE TR6 |
1 | ||||
A1AD | 517276 |
DECARBONISING GASKET SETTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
1 |
£64.02 Ex VAT @ 20% |
||
A1AE | 520884 |
DECARBONISING GASKET SETTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 |
1 |
£71.41 Ex VAT @ 20% |
||
A1AF | 517275 |
ENGINE GASKET SET |
1 | |||
A1 | 517611 |
CYLINDER BLOCKTriumph Catalogue Remarks: Fitted up to Engine No. CC.75000 |
1 | |||
A1A | 520880 |
CYLINDER BLOCKTriumph Catalogue Remarks: Fitted from Engine No. CC.75001 up to ........... |
1 | |||
A1B | UKC0902 |
CYLINDER BLOCKTriumph Catalogue Remarks: Fitted from ........... |
1 | |||
CAP, bearing - Front and intermediateTriumph Catalogue Remarks: Not serviced |
||||||
CAP, bearing - RearTriumph Catalogue Remarks: Not serviced |
||||||
A2 | HB1024 |
BOLT - Caps to block |
8 | |||
A3 | WL0210 |
WASHER, lock -Caps to blockThis item has been superceded by WS107121203 - see below |
8 | |||
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
8 |
£0.42 Ex VAT @ 20% |
|||
A4 | PS1103 |
PLUG, core, oil gallery, front |
1 |
£4.03 Ex VAT @ 20% |
||
A5 | 148353 |
PLUG, core, rear of camshaft |
1 |
£1.60 Ex VAT @ 20% |
||
A6 | 144688 |
PLUG, core, front face and R.H, side of block |
5 |
£2.20 Ex VAT @ 20% |
||
A7 | 144686 |
PLUG, core, rear face and L.H. side of block |
3 |
£3.71 Ex VAT @ 20% |
||
A8 | 144687 |
PLUG, core, front face of block |
1 |
£3.67 Ex VAT @ 20% |
||
A9 | 118632 |
PLUG, dry seal, oil gallery, rearThis item has been superceded by 301815P - see below |
1 | |||
301815P |
PLUG CRANK SHAFT TR3-4A & 5-6Revington TR information: TR3-4A Plug shaft in crank. 1/2" long with a hex key slot. |
1 |
£2.58 Ex VAT @ 20% |
|||
A10 | PU1404 |
PLUG, oil gallery |
1 | |||
A11 | 118686 |
PLUG, oil gallery |
5 |
£4.31 Ex VAT @ 20% |
||
A11A | 116511 |
PLUG, oil gallery |
1 |
£6.49 Ex VAT @ 20% |
||
A12 | 149776 |
BUSH, oil pump drive shaftRevington TR information: This oil pump drive bush is fitted into the block of late TR5 models and all TR6. Early TR5's and all TR250 use bush part number 137978 which fits into a smaller bore in the engine... READ MORE |
1 |
£27.89 Ex VAT @ 20% |
||
A13 | DP0514 |
DOWEL, timing cover attachment |
2 | |||
A14 | DP0612 |
DOWEL, engine plate to gearbox |
2 | |||
A15 | 143943 |
ADAPTOR, oil pressure gauge pipe |
1 |
£17.64 Ex VAT @ 20% |
||
A16 | 146200 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: All markets except U.S.A. fitted up to CC.66569 |
14 | |||
156274 |
STUD, cylinder head attachmentRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
14 |
£12.71 Ex VAT @ 20% |
|||
A16A | 157231 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: All markets except U.S.A. fitted from CC.66570 |
14 | |||
156274 |
STUD, cylinder head attachmentRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
14 |
£12.71 Ex VAT @ 20% |
|||
A16B | 146200 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: U.S.A. markets only fitted up to CC.66569 |
13 | |||
156274 |
STUD, cylinder head attachmentRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
13 |
£12.71 Ex VAT @ 20% |
|||
A16C | 156231 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: U.S.A. markets only fitted from CC.66570 up to CC75000 |
13 | |||
A16D | 156274 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: U.S.A. markets only |
1 |
£12.71 Ex VAT @ 20% |
||
A16E | 157231 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: U.S.A. markets only from engine no. CC75001 |
12 | |||
156274 |
STUD, cylinder head attachmentRevington TR information: Originally USA market only, now this part number is used for all TR5/6 head studs. There were three numbers originally, the difference between each part being the overall length which would have been governed by the... READ MORE |
12 |
£12.71 Ex VAT @ 20% |
|||
A16F | 156274 |
STUD, cylinder head attachmentTriumph Catalogue Remarks: U.S.A. markets only from engine no. CC75002 |
2 |
£12.71 Ex VAT @ 20% |
||
A17 | 139836 |
STUD, gearbox and rear engine plate attachmentThis item has been superceded by ST605141 - see below |
3 | |||
ST605141 |
STUD 5/16 X 1-3/4" UNF+ UNF |
3 |
£3.46 Ex VAT @ 20% |
|||
A18 | 100433 |
STUD, timing cover and engine plate attachmentThis item has been superceded by ST605092 - see below |
2 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
|||
A19 | 101962 |
STUD, distributor pedestal attachmentThis item has been superceded by ST605101 - see below |
2 | |||
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
2 |
£3.04 Ex VAT @ 20% |
|||
A20 | 100433 |
STUD, petrol pump attachmentTriumph Catalogue Remarks: Fitted up to Engine No. |
2 | |||
ST605092 |
STUD 5/16 X 1.156" UNF+ UNF |
2 |
£2.66 Ex VAT @ 20% |
|||
A20 | 101962 |
STUD, petrol pump attachmentTriumph Catalogue Remarks: Fitted from Engine No. |
2 | |||
ST605101 |
STUD 5/16 X 1-1/4" UNF+ UNF |
2 |
£3.04 Ex VAT @ 20% |
|||
A21 | 151134 |
BLOCK, sealing, frontRevington TR information: Sealing block to front engine plate TR250, 5 and 6. Also suitable for 6 cylinder saloon cars. This part is manufactured from aluminium and is prone to having the attachment screws pull the thread out of... READ MORE |
1 |
£53.98 Ex VAT @ 20% |
||
A22 | 150022 |
GASKET, sealing blockThis item has been superceded by UKC8321 - see below |
1 | |||
UKC8321 |
GASKET |
1 |
£0.65 Ex VAT @ 20% |
|||
A23 | PT0805 |
SCREW, set - Sealing block to front engine plate |
2 | |||
A24 | WL0208 |
WASHER, lock - Sealing block to front engine plateThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
A25 | 036234 |
PIECE, filling - Sealing block to cylinder block |
2 |
£2.57 Ex VAT @ 20% |
||
A26 | 100501 |
SCREW - Sealing block to cylinder blockThis item has been superceded by SW605081 - see below |
2 | |||
SW605081 |
SCREW(WAS 100501) |
2 |
£1.96 Ex VAT @ 20% |
|||
A27 | 146326 |
TAP, water drainTriumph Catalogue Remarks: Fitted up to |
1 | |||
A28 | WF0511 |
WASHER, fibre, water drain tapTriumph Catalogue Remarks: Fitted up to |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
A29 | WF0525 |
WASHER, fibre, water drain tapTriumph Catalogue Remarks: Fitted up to |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
A29A | WF0511 |
WASHER, fibreTriumph Catalogue Remarks: Fitted up to |
1 | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
1 |
£0.70 Ex VAT @ 20% |
|||
A30 | 145021 |
CYLINDER LINERThis item has been superceded by 158942 - see below |
6 | |||
158942 |
CYLINDER LINER |
6 |
£32.44 Ex VAT @ 20% |
|||
A31 | 212622 |
REAR OIL SEAL HOUSINGTriumph Catalogue Remarks: Fitted up to |
1 | |||
A31 | 156530 |
REAR OIL SEAL ASSEMBLYTriumph Catalogue Remarks: Fitted from |
1 | |||
212622 |
REAR OIL SEAL HOUSINGRevington TR information: Not available new use 212622SH |
1 | ||||
A32 | 143456 |
SEAL, oil, crankshaft |
1 |
£6.25 Ex VAT @ 20% |
||
A33 | 105321 |
WASHER, joint - Housing to cylinder block |
1 |
£0.98 Ex VAT @ 20% |
||
A34 | HB0809 |
BOLT - Housing to cylinder block |
7 | |||
A35 | WL0208 |
WASHER, lock - Housing to cylinder blockThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
A35A | 500469 |
WASHER, copper, fitted under head of top boltThis item has been superceded by WC10508038 - see below |
1 | |||
WC10508038 |
WASHER COPPER 5/16 I/D X 1/2 O/D X 0.040" |
1 | ||||
OIL PRESSURE ADJUSTMENT DETAILS |
||||||
A36 | 132107 |
PISTON, relief valveRevington TR information: Piston. Oil pressure relive valve, TR250, 5, 6 and Triumph 2000 and 2.5PI etc. Original triumph parts were hardened to 40 Rockwell / 65 Vickers. There are many of these parts on the market that are... READ MORE |
1 |
£11.94 Ex VAT @ 20% |
||
A37 | 131535 |
SPRING, relief valve piston |
1 |
£7.92 Ex VAT @ 20% |
||
A38 | 107246 |
PLUG, relief valveRevington TR information: Consider second hand part 107246SH. |
1 |
£21.97 Ex VAT @ 20% |
||
A39 | 501258 |
WASHER, relief valve plugThis item has been superceded by 6K433 - see below |
1 | |||
6K433 |
WASHER CRUSH COPPER 5/8"Revington TR information: This part is a 5/8" washer. Some on the market under this number are 3/4". |
1 |
£3.11 Ex VAT @ 20% |
|||
149634 |
OIL PUMP ASSEMBLYTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | ||||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A40 | 127732 |
BODY assembly, oil pumpTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | |||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A40A | 104963 |
PLUG, core, oil pump bodyTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | |||
A41 | 508975 |
ROTOR AND SPINDLE, assemblyTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | |||
217488 |
OIL PUMP ASSEMBLYRevington TR information: Consider original second hand part number 217488SH. . |
1 | ||||
A42 | 214842 |
COVER, oil pump bodyTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | |||
A43 | 149621 |
FILTER, oil pumpTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 |
£21.26 Ex VAT @ 20% |
||
A44 | HB0724 |
BOLT - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
2 | |||
A45 | HB0727 |
BOLT - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
1 | |||
A46 | WL0207 |
WASHER, lock - Oil pump to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CC66296 |
3 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
3 |
£0.20 Ex VAT @ 20% |
|||
217488 |
OIL PUMP ASSEMBLYTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 | ||||
A46A | 519569 |
OIL PUMP SPINDLE and Outer Rotor Assembly (Matching Pair)Triumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 |
£37.96 Ex VAT @ 20% |
||
A46B | 217486 |
BODY, oil pumpTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 | |||
A46C | 217487 |
COVER, oil pump boxTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 | |||
A46D | 155370 |
STRAINER and suction pipe assemblyTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 |
£34.68 Ex VAT @ 20% |
||
A46E | HB7026 |
BOLT, oil pump body to cylinder blockTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
3 | |||
A46F | 155371 |
NUT, suction pipe and strainer bodyTriumph Catalogue Remarks: Fitted from Engine No. CC66297 |
1 |
£1.56 Ex VAT @ 20% |
||
A47 | 307836 |
OIL SUMP ASSEMBLYThis item has been superceded by 307834 - see below |
1 | |||
307834 |
ENGINE SUMP TR5-6Revington TR information: Engine Sump TR250, 5, 6. No longer avaialble. Use second hand part 307834SH or aluminium part 307834ALI Two types of oil sump were fitted to TR250, 5 and 6. Part number 307834 and 307836 the difference... READ MORE |
1 | ||||
A48 | 114774 |
PLUG, oil drainTriumph Catalogue Remarks: Alternative to 153452 |
1 |
£5.87 Ex VAT @ 20% |
||
A48A | 153452 |
PLUG, oil drainTriumph Catalogue Remarks: Alternative to 114774 |
1 | |||
114774 |
PLUG, oil drainRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
|||
A49 | 211125 |
GASKET, between sump and blockThis item has been superceded by AJM515 - see below |
1 | |||
AJM515 |
GASKET SUMP TR 5, 250 & 6Revington TR information: Full bottom set is AJM214. |
1 |
£7.45 Ex VAT @ 20% |
|||
A50 | HU0805 |
SCREW, set - Oil sump to cylinder block |
23 | |||
A51 | WL0208 |
WASHER, lock - Oil sump to cylinder blockThis item has been superceded by WS105090853 - see below |
23 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
23 |
£0.25 Ex VAT @ 20% |
|||
A52 | 147712 |
DIPSTICK ASSEMBLYRevington TR information: not available new use Second Hand part 147712SH |
1 | |||
A53 | 032307 |
WASHER, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
||
A54 | 127652 |
TUBE, dipstickRevington TR information: Call for price and availability |
1 | |||
A55 | 215349 |
FRONT ENGINE PLATERevington TR information: not available new. Use Aluminium part 215349A or second hand please enquire |
1 | |||
A56 | 215350 |
WASHER, joint, front engine plate |
1 |
£2.05 Ex VAT @ 20% |
||
A57 | HU0806 |
SCREW, set - Front engine plate to cylinder block |
3 | |||
A58 | WL0208 |
WASHER, lock - Front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A59 | HU0807 |
SCREW, set - Front engine plate and camshaft locating plate to cylinder block |
2 | |||
A60 | WL0208 |
WASHER, lock - Front engine plate and camshaft locating plate to cylinder blockThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
A61 | HU0807 |
SCREW, set -Timing cover and front engine plate to cylinder block |
5 | |||
A62 | WL0208 |
WASHER, lock - Timing cover and front engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
A63 | HN2008 |
NUT - Timing cover and front engine plate to cylinder block |
2 | |||
A64 | 145385 |
ENGINE MOUNTING BRACKET ASSY.Revington TR information: Our stock is genuine Stanpart. See also 145385SHand 145385SHPC |
2 |
£94.92 Ex VAT @ 20% |
||
A65 | HU0906 |
SCREW, set -Mounting bracket to cylinder blockTriumph Catalogue Remarks: Fitted up to Engine No. CC50,000 and ………. |
8 | |||
A65A | TD0911 |
STUD - Securing mounting bracket to cylinder block |
2 | |||
A65B | HU0906 |
SCREW, set - Securing mounting bracket to cylinder blockTriumph Catalogue Remarks: Fitted from Engine No. CC50,001 up to ………. |
6 | |||
A65C | HN2009 |
NUT - Securing mounting bracket to cylinder block |
2 | |||
A66 | WL0209 |
WASHER, lock -Mounting bracket to cylinder blockThis item has been superceded by WS106111243 - see below |
8 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
8 |
£0.37 Ex VAT @ 20% |
|||
A67 | 132669 |
MOUNTING, flexibleRevington TR information: For a competition part with a harder rubber infill, order part number UKC8330 These parts have a metric thread and are therefore supplied with the correct nuts. |
2 |
£22.98 Ex VAT @ 20% |
||
A68 | TN3209 |
NUT, nyloc - Flexible mounting to bracketThis item has been superceded by NY606121 - see below |
4 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
4 |
£1.44 Ex VAT @ 20% |
|||
A69 | WP0009 |
WASHER, plain -- Flexible mounting to bracketThis item has been superceded by WP10613050 - see below |
4 | |||
WP10613050 |
WASHER PLAIN 3/8 X 13/16 INCH NLA use 7/8" |
4 | ||||
A70 | HB0909 |
BOLT - Flexible mounting to chassis frame |
4 | |||
A71 | YN2909 |
NUT, nyloc - Flexible mounting to chassis frameThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
A72 | 211505 |
REAR ENGINE PLATE |
1 | |||
A73 | HU0807 |
SCREW, set - Rear engine plate to cylinder block |
7 | |||
A74 | WL0208 |
WASHER, lock - Rear engine plate to cylinder blockThis item has been superceded by WS105090853 - see below |
7 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
7 |
£0.25 Ex VAT @ 20% |
|||
ENGINE LIFTING EYES |
||||||
A75 | 123716 |
EYE, lifting, frontRevington TR information: No longer available consider 123716SH |
1 | |||
A76 | 145987 |
EYE, lifting, rearRevington TR information: This lifting eye fitted to TR250, 5 and 6 engines is no longer available new. Order second hand 145987SH |
1 | |||
A77 | HU0805 |
SCREW, set - Lifting eyes to cylinder block |
4 | |||
A78 | WL0208 |
WASHER, lock - Lifting eyes to cylinder blockThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
A79 | 121398 |
OIL PRESSURE SWITCHTriumph Catalogue Remarks: Fitted up to Eng. No. CF1 UE |
1 | |||
GPS117 |
OIL PRESSURE SWITCHRevington TR information: Oil pressure switch suitable for TR250, 5, 6-CC, CP and CR. CF TR6 uses GPS113 A high pressure switch is available for those who would prefer earlier warning of impending oil pressure failure. See RTR8353-1 below |
1 |
£11.70 Ex VAT @ 20% |
|||
A79 | 159784 |
OIL PRESSURE SWITCHTriumph Catalogue Remarks: Fitted from Eng. No. CF1 UE |
1 | |||
GPS113 |
OIL P/SWITCH TR/SPIT/VariousRevington TR information: Suitable for CF TR6 amongst other applications. TR250, 5, CC and CR TR6 use GPS117 A high pressure switch is available for those who would prefer earlier warning of impending oil pressure failure. See RTR8353-1 below |
1 |
£32.84 Ex VAT @ 20% |
Also in this listing
Engine Unit 8.6 : 1, Short Engine, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Oil Pressure Adjustment Details, Oil Pump Assembly, Dipstick Assembly, Front Engine Plate, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch