Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CF Plate 20-70 - GEARBOX
Also in this listing
Constant Pinion Shaft and Mainshaft GearsPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
20-70 | 055707 |
CIRCLIP |
1 | |||
20-70 | 058391 |
BEARINGRevington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE |
1 |
£19.78 Ex VAT @ 20% |
||
058391SH |
Second Hand BEARING G/BOX MAIN TR2-6 |
1 |
£20.98 Ex VAT @ 20% |
|||
20-70 | 058955 |
CIRCLIP |
1 |
£5.52 Ex VAT @ 20% |
||
20-70 | 058956 |
CIRCLIP |
1 |
£1.38 Ex VAT @ 20% |
||
20-70 | 060078 |
WASHER |
1 |
£1.10 Ex VAT @ 20% |
||
20-70 | 113431 |
CUP SYNCHRORevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
4 |
£43.60 Ex VAT @ 20% |
||
113431SH |
SYNCHRO RING |
4 |
£22.07 Ex VAT @ 20% |
|||
20-70 | 060658 |
OIL THROWER |
1 |
£2.27 Ex VAT @ 20% |
||
20-70 | 116496 |
WASHER 1ST GEAR SLEEVERevington TR information: This item has a secondhand part available - see below |
1 |
£43.81 Ex VAT @ 20% |
||
116496SH |
WASHER REAR SECOND HAND |
1 |
£7.01 Ex VAT @ 20% |
|||
20-70 | 129941 |
WASHER 0.118" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
1 |
£11.50 Ex VAT @ 20% |
||
20-70 | 129942 |
WASHER 0.121" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
1 |
£12.07 Ex VAT @ 20% |
||
20-70 | 129943 |
WASHER 0.124" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
1 |
£14.26 Ex VAT @ 20% |
||
20-70 | 129944 |
WASHER 0.127" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
1 |
£14.36 Ex VAT @ 20% |
||
20-70 | 134670 |
WASHER 0.132" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.132” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear... READ MORE |
1 |
£11.96 Ex VAT @ 20% |
||
20-70 | 150989 |
BEARING NEEDLE ROLLER PINION SHAFTSThis item has been superceded by 158368 - see below |
1 | |||
158368 |
BEARING M/SHAFT TR6Revington TR information: Used with late TR6 metric mainshaft TKC832 |
1 |
£27.70 Ex VAT @ 20% |
|||
20-70 | 152772 |
GEAR 3RD SPEEDRevington TR information: This item has a secondhand part available - see below |
1 |
£24.11 Ex VAT @ 20% |
||
152772SH |
3RD GEAR TR6 SECOND HAND |
1 |
£114.52 Ex VAT @ 20% |
|||
20-70 | 152803 |
GEAR 1ST SPEEDRevington TR information: Not currently available |
1 | |||
20-70 | 153238 |
BUSH 1ST & 3RD SPEEDRevington TR information: Steel bush |
2 |
£36.31 Ex VAT @ 20% |
||
20-70 | 153318 |
SPRING |
6 |
£1.45 Ex VAT @ 20% |
||
20-70 | 153843 |
GEARREVERSE AND SYNCHRO HUB SLEEVERevington TR information: Not available new please consider second hand part 153843SH. |
1 | |||
153843SH |
Second Hand SYNCHRO HUB 1st & 2nd TR6 |
1 |
£133.70 Ex VAT @ 20% |
|||
20-70 | 157054 |
WASHER |
1 |
£59.90 Ex VAT @ 20% |
||
20-70 | 219126 |
CONSTANT PINION SHAFTRevington TR information: TR6 Input (Constant Pinion) Shaft uses bearing 150989 in a bore of 1.210" = +or- 0.0005 (30.734mm).The depth of the bore isn't critical as the bearing floats but 0.800" is usual. This Input Shaft mates... READ MORE |
1 |
£515.45 Ex VAT @ 20% |
||
20-70 | BL16 |
BALLBEARING 1/4 inch DIAThis item has been superceded by BLS108 - see below |
6 | |||
BLS108 |
BALLBEARING 1/4 inch DIA |
6 |
£2.41 Ex VAT @ 20% |
|||
20-70 | TKC0454 |
2ND SPEED GEAR MAINSHAFTThis item has been superceded by TKC454 - see below |
1 | |||
TKC454 |
2ND SPEED GEARRevington TR information: Gear second speed 33 teeth used on TR6 cars from approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160”. This gear is used with bush UKC956 and thrust washers... READ MORE |
1 |
£150.71 Ex VAT @ 20% |
|||
20-70 | UKC0956 |
BUSH 2ND SPEED GEAR |
1 | |||
20-70 | UKC0958 |
WASHER ON MAINSHAFT 0.197"/0.199" Fitted behind 2nd gear as required |
1 | |||
20-70 | UKC0959 |
WASHER ON MAINSHAFT 0.200"/0.202" Fitted behind 2nd gear as required |
1 | |||
20-70 | UKC0960 |
WASHER ON MAINSHAFT 0.203"/0.205" Fitted behind 2nd gear as requiredThis item has been superceded by UKC960 - see below |
1 | |||
UKC960 |
MAINSHAFT WASHER 0.203-0.205 INCHRevington TR information: Late TR6 second speed thrust washer 0.203-0.205” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers UKC958-9-60-61 are used with late TR6 specification bush UKC956 and... READ MORE |
1 |
£28.79 Ex VAT @ 20% |
|||
20-70 | UKC0961 |
WASHER ON MAINSHAFT 0.206"/0.208" Fitted behind 2nd gear as requiredThis item has been superceded by UKC961 - see below |
1 | |||
UKC961 |
MAINSHAFT WASHERRevington TR information: Late TR6 second speed thrust washer 0.206-0.208” thick Thrust washers UKC958-9-60-61 are used with late TR6 specification bush UKC956 and gear TKC454. Their sizes are as follows: - UKC958 0.197-0.199" UKC959 0.200-0.202" UKC960 0.203-0.205" UKC961 0.206-0.208" |
1 |
£13.69 Ex VAT @ 20% |
Also in this listing
Constant Pinion Shaft and Mainshaft Gears