Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » ENGINES and COMPONENTS » SPROCKETS, TIMING DISCS AND CAM LUBE

Engine, Transmission, wheels/Tyres and Heating/Cooling

SPROCKETS, TIMING DISCS AND CAM LUBE

As the TR2-4A cam sprocket has 2 mounting positions and can be mounted back-to-front, an accuracy on installation of 1/4 of a tooth can be achieved. This is adequate for all road/rally/race cars, except the most advanced bespoke engines. Therefore Revington TR doesn't offer a Vernier cam sprocket for these engines.

The 6 cylinder TR engine however, has an offset cam sprocket that cannot be reversed, resulting in a 1/2 of a tooth accuracy. For this reason the RTR1202 Vernier cam sprocket below is offered.

5 results found.

	Part No.	Description and Comments	Price	Add to Cart
	RTR1202	VERNIER CAM SPROCKET Revington TR information: TR5-6, 2.5, GT6 etc. Vernier cam Sprocket. Allows accurate installation of competition cams.	£197.76 Ex VAT @ 20% £164.80
	RTR1202-1	HARDWARE SET FOR RTR1202 Revington TR information: Hardware. Set of six screws and collets for RTR1202 sprocket	£33.28 Ex VAT @ 20% £27.73	Available to order
	RTR1265 CLICK FOR MORE INFO	TIMING DISC Revington TR information: Timing disc, used for accurate cam installation	£10.38 Ex VAT @ 20% £8.65
	RTR5012 CLICK FOR MORE INFO	CAM LUBE PER 40 GRM TUBE Revington TR information: Camlube (Camshaft lubricant) provides a residual lubrication on start-up of new engines. Whilst called Camlube, this product should be used as an assembly compound on all moving engine components. 40g tube. Not available. See linked part... READ MORE		No longer available
	RTR5012-1 CLICK FOR MORE INFO	CAM LUBE BOTTLE 250ml Revington TR information: Camlube (Camshaft lubricant) provides a residual lubrication on start-up of new engines. Whilst called Camlube, this product should be used as an assembly compound on all moving engine components. 250ml	£13.76 Ex VAT @ 20% £11.47

5 results found.

17 plates in total

ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

PLATE N - ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

PLATE Q - ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

PLATE W - ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

PLATE P - ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

ENGINE (Petrol Injection Model): Alternator Mounting

PLATE X - ENGINE (Petrol Injection Model): Alternator Mounting

ENGINE (Petrol Injection Model): Closed Circuit Breather

PLATE T - ENGINE (Petrol Injection Model): Closed Circuit Breather

ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

PLATE R - ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

PLATE S - ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1

PLATE Y - CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")

GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

PLATE Z - GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

PLATE AA - GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

OVERDRIVE: 'A' Type: Kit

PLATE CA - OVERDRIVE: 'A' Type: Kit

OVERDRIVE: 'A' Type: Unit Assembly

PLATE CB - OVERDRIVE: 'A' Type: Unit Assembly

PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

PLATE AG - PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

PLATE AE - INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

RADIATOR Radiator Block Assembly, Overflow Bottle

PLATE AV - RADIATOR Radiator Block Assembly, Overflow Bottle

BODY AND FITTINGS: Heater Heater Details, Demister Outlet

PLATE BR - BODY AND FITTINGS: Heater Heater Details, Demister Outlet