Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » FLYWHEELS, CLUTCHES AND RELEASE MECHANISMS » CLUTCH RELEASE MECHANISMS » 1" INPUT SHAFT RELEASE PARTS

Engine, Transmission, wheels/Tyres and Heating/Cooling

1" INPUT SHAFT RELEASE PARTS

Increasingly gearboxes with a 1" input shaft derived from the Triumph 2000/2.5PI range rather than the standard 1¼" input shaft are being used in TR2-6. When these smaller shafts are used ( which are perfectly capable of transmitting the torque of the most powerful TR engines incidentally) an alternative release kit can be used incorporating a smaller release bearing than the standard TR2-6 item. This smaller release bearing reduces the force needed to depress the clutch and may be useful in a road car or competition car that has a heavy clutch fitted able to transmit the torque of a more powerful engine. The parts needed are listed below.

These parts cannot be fitted if the gearbox uses the standard 1¼" input shaft or if a spring clutch is in use. The 'bull-nose' bearing is only suitable for diaphragm type clutches.

The parts required are listed below.

7 results found.

	Part No.	Description and Comments	Price	Add to Cart
	140937	CLUTCH FORK		No longer available
	159003A CLICK FOR MORE INFO	SLIPPER BLOCK	£3.48 Ex VAT @ 20% £2.90	Available to order
	160156	CLUTCH R/BRG SLEEVE	£126.41 Ex VAT @ 20% £105.34	Available to order
	GRB209 CLICK FOR MORE INFO	RELEASE BEARING TR7 T2K	£52.18 Ex VAT @ 20% £43.48	Available to order
	116299 CLICK FOR MORE INFO	NOSE PIECE-T2000 GBOX Revington TR information: Triumph 2000/2500 gearbox Nose for 1" input shaft with a 1.30" outside diameter for sliding clutch release sleeve. Consider also Second Hand part 116299SH. This part is commonly found on TR2-6 where .... Triumph... READ MORE	£104.71 Ex VAT @ 20% £87.26	Available to order
	141756 CLICK FOR MORE INFO	SEAL OIL GEARBOX FRONT TR2-6 Revington TR information: Gearbox nose seal TR2-6 and all similar gearboxes, T2000, T2500, Dolomite, Stage ,etc. Our seal stock is genuine Leyland new old stock, not cheap reproductions.	£14.42 Ex VAT @ 20% £12.02
	059537 CLICK FOR MORE INFO	FRONT COVER GEARBOX GASKET Revington TR information: Consider gasket kit RTR1003	£1.39 Ex VAT @ 20% £1.16

7 results found.

17 plates in total

ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

PLATE N - ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

PLATE Q - ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

PLATE W - ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

PLATE P - ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

ENGINE (Petrol Injection Model): Alternator Mounting

PLATE X - ENGINE (Petrol Injection Model): Alternator Mounting

ENGINE (Petrol Injection Model): Closed Circuit Breather

PLATE T - ENGINE (Petrol Injection Model): Closed Circuit Breather

ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

PLATE R - ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

PLATE S - ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1

PLATE Y - CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")

GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

PLATE Z - GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

PLATE AA - GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

OVERDRIVE: 'A' Type: Kit

PLATE CA - OVERDRIVE: 'A' Type: Kit

OVERDRIVE: 'A' Type: Unit Assembly

PLATE CB - OVERDRIVE: 'A' Type: Unit Assembly

PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

PLATE AG - PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

PLATE AE - INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

RADIATOR Radiator Block Assembly, Overflow Bottle

PLATE AV - RADIATOR Radiator Block Assembly, Overflow Bottle

BODY AND FITTINGS: Heater Heater Details, Demister Outlet

PLATE BR - BODY AND FITTINGS: Heater Heater Details, Demister Outlet