Home » Engine, Transmission, wheels/Tyres and Heating/Cooling

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR6 CR Plate 20-70 - GEARBOX

> Open plate

> Open plate in new window

> Print Plate

Also in this listing

Constant Pinion Shaft and Mainshaft Gears

> Close plate

> Open plate in new window

> Print Plate

Also in this listing

Constant Pinion Shaft and Mainshaft Gears

Plate No.	Part No.	Description and Comments	No Per Unit	Price	Add to Cart
20-70	055707 CLICK FOR MORE INFO	CIRCLIP	1	£5.52 Ex VAT @ 20% £4.60
20-70	058391 CLICK FOR MORE INFO	BEARING Revington TR information: Should you require a bearing of outstandingly high quality for competition purposes, we can have bearings specially made by NKE in Austria. Please enquire for current price. We have done considerable research on these bearings as... READ MORE	1	£19.78 Ex VAT @ 20% £16.48	Available to order
20-70	058955 CLICK FOR MORE INFO	CIRCLIP	1	£5.52 Ex VAT @ 20% £4.60
20-70	058956 CLICK FOR MORE INFO	CIRCLIP	1	£1.38 Ex VAT @ 20% £1.15	Available to order
20-70	060078 CLICK FOR MORE INFO	WASHER	1	£1.10 Ex VAT @ 20% £0.92
20-70	113431 CLICK FOR MORE INFO	CUP SYNCHRO Revington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE	4	£43.60 Ex VAT @ 20% £36.33
20-70	060658 CLICK FOR MORE INFO	OIL THROWER	1	£2.27 Ex VAT @ 20% £1.89	Available to order
20-70	116496 CLICK FOR MORE INFO	WASHER 1ST GEAR SLEEVE	1	£43.81 Ex VAT @ 20% £36.51
20-70	129941 CLICK FOR MORE INFO	WASHER 0.118" Fitted between abutment and 1st gear as required Revington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE	1	£11.50 Ex VAT @ 20% £9.58
20-70	129942 CLICK FOR MORE INFO	WASHER 0.121" Fitted between abutment and 1st gear as required Revington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE	1	£12.07 Ex VAT @ 20% £10.06
20-70	129943 CLICK FOR MORE INFO	WASHER 0.124" Fitted between abutment and 1st gear as required Revington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	1	£14.26 Ex VAT @ 20% £11.88	Available to order
20-70	129944 CLICK FOR MORE INFO	WASHER 0.127" Fitted between abutment and 1st gear as required Revington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE	1	£14.36 Ex VAT @ 20% £11.97
20-70	134670 CLICK FOR MORE INFO	WASHER 0.132" Fitted between abutment and 1st gear as required Revington TR information: TR4-Early TR6 second speed thrust washer 0.132” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear... READ MORE	1	£11.96 Ex VAT @ 20% £9.97
20-70	150989 CLICK FOR MORE INFO	BEARING NEEDLE ROLLER PINION SHAFTS This item has been superceded by 158368 - see below	1
	158368	BEARING M/SHAFT TR6 Revington TR information: Used with late TR6 metric mainshaft TKC832	1	£27.70 Ex VAT @ 20% £23.08
20-70	152772 CLICK FOR MORE INFO	GEAR 3RD SPEED	1	£24.11 Ex VAT @ 20% £20.09	Available to order
20-70	152803 CLICK FOR MORE INFO	GEAR 1ST SPEED Revington TR information: Not currently available	1		No longer available
20-70	153238 CLICK FOR MORE INFO	BUSH 1ST & 3RD SPEED Revington TR information: Steel bush	2	£36.31 Ex VAT @ 20% £30.26	Available to order
20-70	153318 CLICK FOR MORE INFO	SPRING	6	£1.45 Ex VAT @ 20% £1.21
20-70	153843 CLICK FOR MORE INFO	GEARREVERSE AND SYNCHRO HUB SLEEVE Revington TR information: Not available new please consider second hand part 153843SH.	1		No longer available
20-70	157054 CLICK FOR MORE INFO	WASHER	1	£59.90 Ex VAT @ 20% £49.92
20-70	219126 CLICK FOR MORE INFO	CONSTANT PINION SHAFT Revington TR information: TR6 Input (Constant Pinion) Shaft uses bearing 150989 in a bore of 1.210" = +or- 0.0005 (30.734mm).The depth of the bore isn't critical as the bearing floats but 0.800" is usual. This Input Shaft mates... READ MORE	1	£515.45 Ex VAT @ 20% £429.54	Available to order
20-70	BL16 CLICK FOR MORE INFO	BALLBEARING 1/4 inch DIA This item has been superceded by BLS108 - see below	6
	BLS108 CLICK FOR MORE INFO	BALLBEARING 1/4 inch DIA	6	£2.41 Ex VAT @ 20% £2.01
20-70	TKC0454 CLICK FOR MORE INFO	2ND SPEED GEAR MAINSHAFT This item has been superceded by TKC454 - see below	1
	TKC454 CLICK FOR MORE INFO	2ND SPEED GEAR Revington TR information: Gear second speed 33 teeth used on TR6 cars from approximately 1972. The length of the bore (1.565” diameter) of the gear is approximately 1.160”. This gear is used with bush UKC956 and thrust washers... READ MORE	1	£150.71 Ex VAT @ 20% £125.59	Available to order
20-70	UKC0956	BUSH 2ND SPEED GEAR	1		No longer available
20-70	UKC0958 CLICK FOR MORE INFO	WASHER ON MAINSHAFT 0.197"/0.199" Fitted behind 2nd gear as required	1		No longer available
20-70	UKC0959 CLICK FOR MORE INFO	WASHER ON MAINSHAFT 0.200"/0.202" Fitted behind 2nd gear as required	1		No longer available
20-70	UKC0960 CLICK FOR MORE INFO	WASHER ON MAINSHAFT 0.203"/0.205" Fitted behind 2nd gear as required This item has been superceded by UKC960 - see below	1
	UKC960 CLICK FOR MORE INFO	MAINSHAFT WASHER 0.203-0.205 INCH Revington TR information: Late TR6 second speed thrust washer 0.203-0.205” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers UKC958-9-60-61 are used with late TR6 specification bush UKC956 and... READ MORE	1	£28.79 Ex VAT @ 20% £23.99
20-70	UKC0961 CLICK FOR MORE INFO	WASHER ON MAINSHAFT 0.206"/0.208" Fitted behind 2nd gear as required This item has been superceded by UKC961 - see below	1
	UKC961 CLICK FOR MORE INFO	MAINSHAFT WASHER Revington TR information: Late TR6 second speed thrust washer 0.206-0.208” thick Thrust washers UKC958-9-60-61 are used with late TR6 specification bush UKC956 and gear TKC454. Their sizes are as follows: - UKC958 0.197-0.199" UKC959 0.200-0.202" UKC960 0.203-0.205" UKC961 0.206-0.208"	1	£13.69 Ex VAT @ 20% £11.41

Engine, Transmission, wheels/Tyres and Heating/Cooling

TR6 CR Plate 20-70 - GEARBOX

Also in this listing

Also in this listing

055707

058391

058955

058956

060078

113431

060658

116496

129941

129942

129943

129944

134670

150989

BEARING NEEDLE ROLLER PINION SHAFTS

158368

152772

GEAR 3RD SPEED

152803

153238

153318

153843

157054

219126

BL16

BALLBEARING 1/4 inch DIA

BLS108

TKC0454

2ND SPEED GEAR MAINSHAFT

TKC454

UKC0956

BUSH 2ND SPEED GEAR

UKC0958

UKC0959

UKC0960

WASHER ON MAINSHAFT 0.203"/0.205" Fitted behind 2nd gear as required

UKC960

UKC0961

WASHER ON MAINSHAFT 0.206"/0.208" Fitted behind 2nd gear as required

UKC961