Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CR Plate 20-70 - GEARBOX
Also in this listing
Constant Pinion Shaft and Mainshaft GearsPlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
![]() |
20-70 | 055707 |
CIRCLIP |
1 | ||
![]() |
20-70 | 058391 |
BEARINGRevington TR information: consider second hand 058391SH.
We have done considerable research on these bearings as some on offer have too large an outer case which will touch the front oil thrower creating swarf and starving the front bearing... READ MORE |
1 |
£17.76 Ex VAT @ 20% |
|
![]() |
20-70 | 058955 |
CIRCLIPRevington TR information: This item has a secondhand part available - currently not available |
1 |
£3.48 Ex VAT @ 20% |
|
![]() |
20-70 | 058956 |
CIRCLIP |
1 |
£1.38 Ex VAT @ 20% |
|
![]() |
20-70 | 060078 |
WASHER |
1 |
£1.10 Ex VAT @ 20% |
|
![]() |
20-70 | 113431 |
CUP SYNCHRORevington TR information: From our experiance we have found our supplier to supply the best shaped rings with the correct profile ramps and round inside. Slightly more expensive but we think they are the best. We also have stock... READ MORE |
4 |
£19.60 Ex VAT @ 20% |
|
![]() |
20-70 | 060658 |
OIL THROWER |
1 |
£2.27 Ex VAT @ 20% |
|
![]() |
20-70 | 116496 |
WASHER 1ST GEAR SLEEVERevington TR information: This item has a secondhand part available - currently not available |
1 |
£43.81 Ex VAT @ 20% |
|
![]() |
20-70 | 129941 |
WASHER 0.118" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.118” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are... READ MORE |
1 |
£11.50 Ex VAT @ 20% |
|
![]() |
20-70 | 129942 |
WASHER 0.121" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.121” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows:... READ MORE |
1 |
£12.07 Ex VAT @ 20% |
|
![]() |
20-70 | 129943 |
WASHER 0.124" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.124” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
1 |
£14.26 Ex VAT @ 20% |
|
![]() |
20-70 | 129944 |
WASHER 0.127" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.127” thick Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear 105629. An additional washer 134670 was added to the range during production. Their sizes are as follows: - 129941... READ MORE |
1 |
£14.36 Ex VAT @ 20% |
|
![]() |
20-70 | 134670 |
WASHER 0.132" Fitted between abutment and 1st gear as requiredRevington TR information: TR4-Early TR6 second speed thrust washer 0.132” thick. This washer is made from EN36 steel to a higher than normal standard for longer life. Thrust washers 129941-2-3-4 are used with TR4-early 6 specification bush 129939X and gear... READ MORE |
1 |
£11.96 Ex VAT @ 20% |
|
![]() |
20-70 | 150989 |
BEARING NEEDLE ROLLER PINION SHAFTSThis item has been superceded by 158368 - currently not available |
1 | ||
![]() |
20-70 | 152772 |
GEAR 3RD SPEEDRevington TR information: This item has a secondhand part available - currently not available |
1 |
£24.11 Ex VAT @ 20% |
|
![]() |
20-70 | 152803 |
GEAR 1ST SPEEDRevington TR information: Not currently available |
1 | ||
![]() |
20-70 | 153238 |
BUSH 1ST & 3RD SPEEDRevington TR information: Steel bush |
2 |
£36.31 Ex VAT @ 20% |
|
![]() |
20-70 | 153318 |
SPRING |
6 |
£1.45 Ex VAT @ 20% |
|
![]() |
20-70 | 153843 |
GEARREVERSE AND SYNCHRO HUB SLEEVERevington TR information: Not available new please consider second hand part 153843SH. |
1 | ||
![]() |
20-70 | 157054 |
WASHERRevington TR information: This item has a secondhand part available - currently not available |
1 |
£35.90 Ex VAT @ 20% |
|
![]() |
20-70 | 219126 |
CONSTANT PINION SHAFTRevington TR information: TR6 Input (Constant Pinion) Shaft uses bearing 150989 in a bore of 1.210" = +or- 0.0005 (30.734mm).The depth of the bore isn't critical as the bearing floats but 0.800" is usual. This Input Shaft mates... READ MORE |
1 |
£515.45 Ex VAT @ 20% |
|
![]() |
20-70 | BL16 |
BALLBEARING 1/4 inch DIAThis item has been superceded by BLS108 - currently not available |
6 | ||
![]() |
20-70 | TKC0454 |
2ND SPEED GEAR MAINSHAFTThis item has been superceded by TKC454 - currently not available |
1 | ||
![]() |
20-70 | UKC0956 |
BUSH 2ND SPEED GEAR |
1 | ||
![]() |
20-70 | UKC0958 |
WASHER ON MAINSHAFT 0.197"/0.199" Fitted behind 2nd gear as required |
1 | ||
![]() |
20-70 | UKC0959 |
WASHER ON MAINSHAFT 0.200"/0.202" Fitted behind 2nd gear as required |
1 | ||
![]() |
20-70 | UKC0960 |
WASHER ON MAINSHAFT 0.203"/0.205" Fitted behind 2nd gear as requiredThis item has been superceded by UKC960 - currently not available |
1 | ||
![]() |
20-70 | UKC0961 |
WASHER ON MAINSHAFT 0.206"/0.208" Fitted behind 2nd gear as requiredThis item has been superceded by UKC961 - currently not available |
1 |
Also in this listing
Constant Pinion Shaft and Mainshaft Gears