Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CR Plate 20-83 - REAR AXLE
Also in this listing
Differential Gears and carrier, nose bearings & flange| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
20-83 | 056793 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.0465"/0495 as required |
1 | ||
|
139951 |
WASHER THRUSTRevington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
1 |
£9.07 Ex VAT @ 20% |
||
|
20-83 | 100422 |
BEARING, roller, pinion shank |
1 |
£54.68 Ex VAT @ 20% |
|
|
20-83 | 100562 |
SHIM, adjusting pinion shank bearing - .003"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
1 |
£2.14 Ex VAT @ 20% |
|
|
20-83 | 100563 |
SHIM, adjusting pinion shank bearing - .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
1 |
£2.86 Ex VAT @ 20% |
|
|
20-83 | 100564 |
SHIM, adjusting pinion shank bearing - .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
1 |
£1.84 Ex VAT @ 20% |
|
|
20-83 | 100844 |
PIN |
1 |
£43.52 Ex VAT @ 20% |
|
|
20-83 | 100894 |
SHIM ADJUSTING |
1 |
£3.11 Ex VAT @ 20% |
|
|
20-83 | 100894 |
SHIM ADJUSTING 003 |
1 |
£3.11 Ex VAT @ 20% |
|
|
20-83 | 100895 |
SHIM ADJUSTING 005This item has been superceded by 100895/5 - see below |
2 | ||
|
100895/5 |
SHIM-DIFF PINION 0.005 |
2 |
£4.08 Ex VAT @ 20% |
||
|
20-83 | 100896 |
SHIM ADJUSTING 010This item has been superceded by 100896/10 - see below |
2 | ||
|
100896/10 |
SHIM-DIFF PINION 0.010 |
2 |
£1.39 Ex VAT @ 20% |
||
|
20-83 | 100897 |
BEARINGThis item has been superceded by 100897A - see below |
1 | ||
|
100897A |
DIFF BEARING PIN BIG TR2-4Revington TR information: The outer diameter is 72.6mm The bore size is 31.72mm Overall height 30.4mm |
1 |
£46.30 Ex VAT @ 20% |
||
|
20-83 | 100965 |
SHIM 008This item has been superceded by 100965/3 - see below |
1 | ||
|
100965/3 |
SHIM PINION BEARING .003 |
1 | |||
|
20-83 | 100966 |
SHIM 005This item has been superceded by 1009665 - see below |
1 | ||
|
1009665 |
SHIM BRG 0.005 |
1 |
£1.73 Ex VAT @ 20% |
||
|
20-83 | 100967 |
SHIM 010 |
1 |
£1.72 Ex VAT @ 20% |
|
|
20-83 | 102801 |
WASHER THRUST |
2 |
£4.22 Ex VAT @ 20% |
|
|
20-83 | 110515 |
ROLLER BEARING |
2 |
£62.52 Ex VAT @ 20% |
|
|
20-83 | 110737 |
BOLT |
10 |
£2.12 Ex VAT @ 20% |
|
|
20-83 | 111215 |
PIN LOCATINGRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
|
|
20-83 | 118977 |
WASHERThis item has been superceded by WS106111243 - see below |
10 | ||
|
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
10 |
£0.37 Ex VAT @ 20% |
||
|
20-83 | 138105 |
FLANGE PINIONRevington TR information: Round Differential input flange, TR4A (both Live axle and IRS) to TR6 CP52867/CC61570. Consider original second hand part 138105SH. |
1 |
£84.07 Ex VAT @ 20% |
|
|
20-83 | 139951 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.051/053 as required |
1 |
£9.07 Ex VAT @ 20% |
|
 |
20-83 | 139952 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.055/057 as required |
1 |
£8.70 Ex VAT @ 20% |
|
|
20-83 | 139953 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.059/061 as required |
1 |
£11.57 Ex VAT @ 20% |
|
|
20-83 | 139954 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.063/065 as required |
1 |
£15.88 Ex VAT @ 20% |
|
|
20-83 | 139955 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.067/069 as required |
1 |
£7.60 Ex VAT @ 20% |
|
|
20-83 | 139956 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.071/073 as required |
1 |
£7.60 Ex VAT @ 20% |
|
 |
20-83 | 140337 |
SEAL, oil, pinionRevington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
1 |
£12.88 Ex VAT @ 20% |
|
|
20-83 | 142165 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.049/051 as required |
1 | ||
|
20-83 | 142166 |
WASHER THRUSTTriumph Catalogue Remarks: cupped thrust washer 0.053/055 as required |
1 | ||
|
20-83 | 142333 |
WASHER FLANGE TO PINIONThis item has been superceded by WP11020164 - see below |
1 | ||
|
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
1 |
£7.94 Ex VAT @ 20% |
||
|
20-83 | 144254 |
LOCTITE STUDLOCTriumph Catalogue Remarks: for Crown wheel bolts |
1 | ||
|
20-83 | 144259 |
LOCQUIC PRIMER TTriumph Catalogue Remarks: for Crown wheel bolts |
1 | ||
|
20-83 | 153384 |
GEAR DIFF TR3G-6Revington TR information: This part is not available new, please consider second hand part number 153384SH or complete differential carrier assemblies 302155X and 302155XSH |
2 |
£124.64 Ex VAT @ 20% |
|
|
20-83 | 153385 |
PINION DIFFERENTIAL TEETHRevington TR information: 10 tooth pinion gear 15.5mm thick. This part is not available new, please consider second hand part number 153385SH or complete differential carrier assemblies 302155X and 302155XSH. . All TR s from Girling TR3-TR6 use... READ MORE |
2 |
£113.32 Ex VAT @ 20% |
|
|
20-83 | 156903 |
SPACER BETWEEN BEARINGS (COLLAPSIBLE) |
1 |
£16.38 Ex VAT @ 20% |
|
|
20-83 | 159394 |
NUT PINION FLANGEThis item has been superceded by NY610163 - see below |
1 | ||
|
NY610163 |
NUT NYLOC 5/8UNF x ½" TALL 1-1/8" AFRevington TR information: Nyloc Nut 5/8" UNF, ½" tall and 1-1/8" AF, grey protective coating. This is a special heavy duty nut which is actually Leyland original part number 159394 (TR7 4 speed axle). Our stock is original Leyland... READ MORE |
1 | |||
|
20-83 | 160373 |
THRUST WASHER 59/61 THOUTriumph Catalogue Remarks: cupped thrust washer 0.057/059 as required |
1 | ||
|
139953 |
WASHER THRUSTRevington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
1 |
£11.57 Ex VAT @ 20% |
||
|
20-83 | 160374 |
WASHER THRUST DIFFERENTIAL PINION 061/063Triumph Catalogue Remarks: cupped thrust washer 0.061/063 as required |
1 | ||
|
139954 |
WASHER THRUSTRevington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
1 |
£15.88 Ex VAT @ 20% |
||
|
20-83 | 160375 |
WASHER THRUST DIFFERENTIAL PINION 065/067Triumph Catalogue Remarks: cupped thrust washer 0.065/067 as required |
1 |
£7.01 Ex VAT @ 20% |
|
|
20-83 | 160376 |
WASHER THRUST DIFFERENTIAL PINION 069/071Triumph Catalogue Remarks: cupped thrust washer 0.069/071 as required |
1 | ||
|
139956 |
WASHER THRUSTRevington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
1 |
£7.60 Ex VAT @ 20% |
||
|
20-83 | 302155 |
DIFFERENTIAL CASINGSRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | ||
|
20-83 | 514773 |
WIRE SOFT IRON 14GXThis item has been superceded by EAW4321 - see below |
1 | ||
|
EAW4321 |
WIRE TIE |
1 |
£0.58 Ex VAT @ 20% |
||
|
20-83 | UKC0547 |
CROWN WHEEL AND PINION ASSYTriumph Catalogue Remarks: PI |
1 | ||
|
20-83 | UKC0548 |
CROWN WHEEL AND PINION ASSY RATIO 371Triumph Catalogue Remarks: Carb |
1 | ||
|
502127 |
CWP 3.7:1 TR2-6Revington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 |
£529.28 Ex VAT @ 20% |
Also in this listing
Differential Gears and carrier, nose bearings & flange