- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
This part appears on the following Triumph Catalogue Plates
| Car Type | Plate | Plate Title | Plate No. | Triumph Part Description | No per Unit |
| TR2 | N | FRONT SUSPENSION AND FRONT HUBS. | N38 | Screw, stop to trunnion | 2 |
| TR2 | G | ENGINE: 1-1/2" SU CARBURETTORS. | G80A | Screw, set, pivot lever to manifold From Engine No. 1 |
1 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31E | Screw, set, steady bracket to steering column From Comm. No. TS8637 |
2 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31T | Screw, set | 1 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31W | Screw, set | 2 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31AP | Screw, set | 2 |
| TR2 | GS | ENGINE: 1-3/4" SU CARBURETTORS. | GS78A | Screw, set, pivot lever to manifold From Engine No. 8997E |
1 |
| TR2 | T | PEDALS: ACCELERATOR, CLUTCH AND BRAKE. | T43 | Screw, cover and master cylinder to bulkhead | 2 |
| TR2 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S15 | Screw, set, ratchet to attachment plate | 1 |
| TR2 | K | GEARBOX: CASING, TOP COVER AND MOUNTING. | K70 | Bolt, cover to housing | 2 |
| TR2 | W | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | W26AF | Screw, set, three-way connection to rear axle bracket From Comm. No. TS13046 |
1 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X31 | Screw, set, stay rod to radiator | 2 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X31 | Screw, set, stay rod to radiator | 2 |
| TR3 | N | FRONT SUSPENSION AND FRONT HUBS. | N38 | Screw, stop to trunnion | 2 |
| TR3 | G | ENGINE: 1-1/2" SU CARBURETTORS. | G80A | Screw, set, pivot lever to manifold From Engine No. 1 |
1 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31E | Screw, set, steady bracket to steering column From Comm. No. TS8637 |
2 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31T | Screw, set | 1 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31W | Screw, set | 2 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31AP | Screw, set | 2 |
| TR3 | GS | ENGINE: 1-3/4" SU CARBURETTORS. | GS78A | Screw, set, pivot lever to manifold From Engine No. 8997E |
1 |
| TR3 | T | PEDALS: ACCELERATOR, CLUTCH AND BRAKE. | T43 | Screw, cover and master cylinder to bulkhead | 2 |
| TR3 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S15 | Screw, set, ratchet to attachment plate | 1 |
| TR3 | K | GEARBOX: CASING, TOP COVER AND MOUNTING. | K70 | Bolt, cover to housing | 2 |
| TR3 | W | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | W26AF | Screw, set, three-way connection to rear axle bracket From Comm. No. TS13046 |
1 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X31 | Screw, set, stay rod to radiator | 2 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X31 | Screw, set, stay rod to radiator | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z33 | Screw, set Stay rod to radiator | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z33 | Screw, set Stay rod to radiator | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z33 | Screw, set Stay rod to radiator | 2 |
| TR4 | H | ENGINE: 1-3/4" SU CARBURETTORS. | H74A | Screw, set, pivot lever to manifold Fitted up to Engine No. CT168DOE and from CT16901E up to CT only |
1 |
| TR4 | W | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. | W20 | Screw, set Pedal shaft cover and m/cylinder bracket to bulkhead | 2 |
| TR4 | AZ | BODY AND FITTINGS: SEATS FRONT AND REAR, HOOD STICKS COVERS AND BLANKING PLUGS. | AZ11D | Screw, set Seat slides to seat Fitted from Body No.20695CT Black Leather, 20877CT Black Vinyde, 20953CT Red Leather, 20926CT Red Vinyde, 20171CT Blue Leather, ?????CT Blue Vinyde |
4 |
| TR4 | AP | BODY AND FITTINGS: FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AP41 | Screw, set Facia board bracket to facia | 2 |
| TR4 | AP | BODY AND FITTINGS: FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AP41 | Screw, set Facia board bracket to facia | 2 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P46 | Set, screw, stop to trunnion | 2 |
| TR4 | P | FRONT SUSPENSION AND FRONT HUBS. | P46 | Set, screw, stop to trunnion | 2 |
| TR4 | L | GEARBOX: CASING, TOP COVER AND MOUNTING. | L76H | Screw, set Clip to straps Fitted from Commission No. CT17815 and future |
1 |
| TR4 | L | GEARBOX: CASING, TOP COVER AND MOUNTING. | L84 | Setscrew Cover to gearbox | 2 |
| TR4 | U | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | U15 | Screw, set Ratchet to attachment plate | 1 |
| TR4 | Y | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | Y22 | Screw, set, three-way connection to rear axle bracket | 1 |
| TR4A | P | GEARBOX: CASING, TOP COVER AND MOUNTING. | P79H | Screw, Set Securing clip to strap | 1 |
| TR4A | T | INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS. | T49 | Screw, set Bearing housing to hypoid housing | 8 |
| TR4A | AB | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. | AB20 | Screw, set Pedal shaft cover and m/cylinder bracket to bulkhead | 2 |
| TR4A | AW | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. | AW62 | Screw, set Fixing bracket to facia | 2 |
| TR4A | AW | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. | AW62 | Screw, set Fixing bracket to facia | 2 |
| TR4A | BG | BODY AND FITTINGS: SEATS FRONT AND REAR AND BLANKING PLUGS. | BG52 | Screw, set Seat slides to seat | 4 |
| TR250 | A | ENGINE: External | A52 | Screw, set - Front engine plate to cylinder block | 3 |
| TR250 | AW | BODY AND FITTINGS: Facia Panel Assembly | AW60 | Screw, set - Bracket to facia | 2 |
| TR250 | AW | BODY AND FITTINGS: Facia Panel Assembly | AW60 | Screw, set - Bracket to facia | 2 |
| TR250 | BF | BODY AND FITTINGS: Seats | BF34 | Screw, set - Seat slides to seats | 4 |
| TR250 | S | INDEPENDENT REAR AXLE | S54 | Screw, set - Housing to hypoid housing | 8 |
| TR5 | A | ENGINE: ENGINE UNIT COMPLETE, GASKET SETS, CYLINDER BLOCK, FRONT AND REAR PLATES AND OIL PUMP | A56 | Screw, set Front engine plate to cylinder block | 3 |
| TR5 | BG | BODY AND FITTINGS: SEATS FRONT, REAR TRIM BOARD AND SAFTEY HARNESS ATTACHMENTS | BG34 | Screw, set Seat slides to seats | 4 |
| TR5 | AX | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME | AX60 | Screw, set Bracket to facia | 2 |
| TR5 | AX | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME | AX60 | Screw, set Bracket to facia | 2 |
| TR5 | R | INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS | R50 | Screw, set Housing to hypoid housing | 8 |
| TR5 | AC | EXHAUST SYSTEM AND MOUNTINGS | AC13 | Screw, set Securing pipes to supporting bracket | 1 |
| TR6CP | N | ENGINE (Petrol Injection Model): Block and Sump | N62 | SCREW, set - Front engine plate to cylinder block | 3 |
| TR6CP | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP60 | SCREW, set - Bracket to facia | 2 |
| TR6CP | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP60 | SCREW, set - Bracket to facia | 2 |
| TR6CP | BY | BODY AND FITTINGS: Seats and Back Board - Non USA, Japan | BY37 | SCREW, set — Seat slides to seats All markets except U.S.A. and Germany Fitted up to Body No. CF1 and CR1 |
4 |
| TR6CP | BZ | BODY AND FITTINGS: Seats and Back Board - USA, Japan | BZ43 | SCREW, set — Seat slides to seat All markets Fitted up to Body No. CF1 and CR1 |
4 |
| TR6CP | BV | BODY AND FITTINGS: Bumpers | BV37 | SCREW, set — Securing bumper to side bracket Fitted up to Comm. No. CP26933 and CC31776 |
2 |
| TR6CP | AE | INDEPENDENT REAR AXLE | AE50 | SCREW, set - Housing to hypoid housing | 8 |
| TR6CP | AU | EXHAUST SYSTEM (PETROL INJECTION MODEL) | AU13 | SCREW, set - Securing pipes to supporting bracket Fitted up to ………… |
1 |
| TR6CP | AU | EXHAUST SYSTEM (PETROL INJECTION MODEL) | AU15J | SCREW, set - Support strap to Angle Fitted from ............ |
1 |
| TR6CC | A | ENGINE (Carburettor Model): Block and Sump | A57 | SCREW, set - Front engine plate to cylinder block | 3 |
| TR6CC | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP60 | SCREW, set - Bracket to facia | 2 |
| TR6CC | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP60 | SCREW, set - Bracket to facia | 2 |
| TR6CC | BY | BODY AND FITTINGS: Seats and Back Board - Non USA, Japan | BY37 | SCREW, set — Seat slides to seats All markets except U.S.A. and Germany Fitted up to Body No. CF1 and CR1 |
4 |
| TR6CC | BZ | BODY AND FITTINGS: Seats and Back Board - USA, Japan | BZ43 | SCREW, set — Seat slides to seat All markets Fitted up to Body No. CF1 and CR1 |
4 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR10AP | BOLT - Securing bracket assembly canister mounting Fitted from Body No. CC62448 up to ............ |
1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR10AP | BOLT - Securing bracket assembly canister mounting Fitted from Body No. CC62448 up to ............ |
1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR11BG | BOLT - Securing bracket assembly canister mounting | 1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR11BG | BOLT - Securing bracket assembly canister mounting | 1 |
| TR6CC | BV | BODY AND FITTINGS: Bumpers | BV37 | SCREW, set — Securing bumper to side bracket Fitted up to Comm. No. CP26933 and CC31776 |
2 |
| TR6CC | AE | INDEPENDENT REAR AXLE | AE50 | SCREW, set - Housing to hypoid housing | 8 |
| TR6CC | AT | EXHAUST SYSTEM (CARBURETTOR MODEL) | AT27N | SCREW Securing Pipes Fitted up to ............ |
1 |
| TR6CC | AT | EXHAUST SYSTEM (CARBURETTOR MODEL) | AT27Z | SCREW, Set Angle Fitted from ............ |
1 |
| TR6CR | 20-37 | ENGINE (P.I. MODELS) | 20-37 | SCREW 5/16 UNF X 3/4 INCH | 3 |
| TR6CF | 20-06 | ENGINE (CARB MODELS) | 20-06 | SCREW 5/16UNF X 3/4" | 3 |
| TR6CF | 20-07 | ENGINE (CARB MODELS) | 20-07 | SCREW 5/16 UNF X 3/4 INCH | 2 |
| TR6CF | 20-32 | ENGINE (CARB MODELS) | 20-32 | SCREW 5/16 UNF X 3/4 INCH | 2 |
| TR6CF | 20-32 | ENGINE (CARB MODELS) | 20-32 | SCREW 5/16 UNF X 3/4 INCH | 2 |
