Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR3 Plate A - ENGINE: CYLINDER BLOCK AND HEAD
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
A1AA | 501418 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A1AB | 503708 |
ENGINE UNIT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A1AC | 503706 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 8997E |
||||
A1AD | 509009 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 50001E |
||||
A1AE | 503707 |
ENGINE UINT (Less Water Pump, Distributor, Dy- namo, Petrol Pump, Oil Filter, Thermo stat, Exhaust Manifold, Carburettor and Sparking Plugs)Triumph Catalogue Remarks: From Engine No. 9359E |
||||
A1AF | 501678 |
DECARBONISING SETTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
505281 |
DECARBONISING SETRevington TR information: TR2-4A Cylinder head gasket set high port 1991cc (83mm). 83mm was an option up to TR4A but rarely taken up. The 83mm gasket is no longer available and the set includes an 86mm gasket. This gasket... READ MORE |
1 |
£101.03 Ex VAT @ 20% |
|||
A1AG | 505281 |
DECARBONISING SETTriumph Catalogue Remarks: From Engine No. 8637E |
1 |
£101.03 Ex VAT @ 20% |
||
A1AH | 509827 |
ENGINE GASKET SETTriumph Catalogue Remarks: From Engine No. 1 |
||||
GEG248 |
GASKET SET CONVERSION TR2/4A - BOTTOM ENDRevington TR information: This is a bottom end gasket set. Head gasket set and front cover seal are also required for a full engine gasket set. |
£42.20 Ex VAT @ 20% |
||||
A1 | 502363 |
CYLINDER BLOCK ASSEMBLYRevington TR information: not available new, use second hand part 502363SH |
1 | |||
A2 | Cap, bearing, front Not serviced |
1 | ||||
A2A | Cap, bearing, centre Not serviced |
1 | ||||
A3 | Cap, bearing, rear Not serviced |
1 | ||||
A4 | 058335 |
Packing, felt, rear bearing cap |
2 |
£6.31 Ex VAT @ 20% |
||
A5 | 057121 |
Screw, set, bearing caps to block |
6 |
£7.34 Ex VAT @ 20% |
||
A6 | 101587 |
Washer, spring, on screwsThis item has been superceded by WS108143133 - see below |
6 | |||
WS108143133 |
WASHER SPRING 1/2" RECT SECTION |
6 |
£0.16 Ex VAT @ 20% |
|||
A7 | 056405 |
Bush, oil pump drive shaftRevington TR information: use second hand part 056405SH |
1 | |||
A7A | 044473 |
Plug, core, rear of camshaft |
1 |
£3.22 Ex VAT @ 20% |
||
A8 | 567650 |
Plug, core, ends of oil galleryThis item has been superceded by 056765 - see below |
2 | |||
056765 |
PLUG BLANKNG OIL GALLERY TR2-6Revington TR information: TR2-4A oil gallery end plugs, part number 056765, are screwed into the block and must be removed and replaced during an engine rebuild to ensure the oil gallery can be cleaned properly. Price per plug not... READ MORE |
2 |
£8.04 Ex VAT @ 20% |
|||
A8A | 102785 |
Screw, set, in side of oil galleryRevington TR information: May need to consider second hand. |
3 | |||
A9 | 500463 |
Washer, copper, on setscrewThis item has been superceded by WC10711064 - see below |
3 | |||
WC10711064 |
WASHER COPPER 7/16 x 11/16 x .064 |
3 |
£0.89 Ex VAT @ 20% |
|||
A9A | HU0954 |
Screw, set, in side of oil galleryThis item has been superceded by SH506041 - see below |
1 | |||
SH506041 |
SCREW 3/8 UNC X 1/2 INCH |
1 |
£1.60 Ex VAT @ 20% |
|||
A9B | 500464 |
Washer, copper, on setscrewThis item has been superceded by WC10610080 - see below |
1 | |||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
1 |
£1.81 Ex VAT @ 20% |
|||
A10 | 061478 |
Tap, water drainRevington TR information: Brass Drain tap with a parallel 1/2"UNF thread, used in the engine block of TR2-5 to drain the coolant. This tap can be used on later TR's instead of the standard blanking plug, or indeed in... READ MORE |
1 |
£24.19 Ex VAT @ 20% |
||
A11 | WF0511 |
Washer, fibre, on drain tapThis item has been superceded by WF10812062 - see below |
A/R | |||
WF10812062 |
WASHER FIBRE 1/2 ID x 3/4 x 0.062" THICK |
A/R |
£0.70 Ex VAT @ 20% |
|||
A12 | 106959 |
Stud, short, cylinder head attachment at front, centre and rear of blockTriumph Catalogue Remarks: From Engine No. 1 |
6 |
£17.27 Ex VAT @ 20% |
||
A13 | 106960 |
Stud, long, cylinder head attachment adjacent to centre of cylindersTriumph Catalogue Remarks: From Engine No. 2 |
4 |
£17.64 Ex VAT @ 20% |
||
A13A | 113570 |
Stud, short, cylinder head attachment at front, centre and rear of block-R.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
3 |
£21.97 Ex VAT @ 20% |
||
A13B | 106959 |
Stud, short, cylinder head attachment at front, centre and rear of block-L.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
3 |
£17.27 Ex VAT @ 20% |
||
A13C | 113169 |
Stud, long, cylinder head attachment adjacent to centre of cylinders-R.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
2 |
£19.90 Ex VAT @ 20% |
||
A13D | 106960 |
Stud, long, cylinder head attachment adjacent to centre of cylinders-L.H. side of engineTriumph Catalogue Remarks: From Engine No. 13052E |
2 |
£17.64 Ex VAT @ 20% |
||
A13E | 113570 |
Stud, cylinder headRevington TR information: 1/2"UNC |
2 |
£21.97 Ex VAT @ 20% |
||
A13F | 121734 |
Stud, cylinder head |
1 |
£36.85 Ex VAT @ 20% |
||
A13G | V7318 |
Stud, oil pump attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A14 | V7322 |
Stud, petrol pump attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A15 | V7322 |
Stud, distributor pedestal attachmentThis item has been superceded by ST705111 - see below |
2 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
2 |
£1.38 Ex VAT @ 20% |
|||
A16 | V7318 |
Stud, front engine plate and timing cover attachmentThis item has been superceded by ST705111 - see below |
1 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
1 |
£1.38 Ex VAT @ 20% |
|||
A17 | DP0512 |
Dowel, locating front engine plate and timing coverThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A18 | V3718 |
Stud, gearbox attachmentThis item has been superceded by ST705111 - see below |
3 | |||
ST705111 |
STUD 5/16 X 1-3/8" 5/8UNF+3/8UNC |
3 |
£1.38 Ex VAT @ 20% |
|||
A18A | DP0612 |
Dowel, locating gearbox on rear face of cylinder blockThis item has been superceded by DP619 - see below |
2 | |||
DP619 |
DOWEL 3/8" DIA x 1.5" LONG Cut to fitRevington TR information: This dowel is used on 6 cylinder engines to locate crankshaft to flywheel. To determine length required, measure into the crankshaft and into the flywheel and add these together then subtract 1mm for clearance. |
2 |
£3.00 Ex VAT @ 20% |
|||
A19 | 105359 |
Stud, pressure oil filter attachment lower frontTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
ST705171 |
STUD 5/16 UNC/UNF2-1/8 |
1 |
£2.47 Ex VAT @ 20% |
|||
A19A | 112170 |
Stud, pressure oil filter attachment lower frontTriumph Catalogue Remarks: From Engine No. 9952E |
1 | |||
ST705171 |
STUD 5/16 UNC/UNF2-1/8 |
1 |
£2.47 Ex VAT @ 20% |
|||
A20 | HB0858 |
Bolt, pressure oil filter attachment upper frontThis item has been superceded by SH505081 - see below |
1 | |||
SH505081 |
SCREW 5/16 UNC X 1" |
1 |
£0.82 Ex VAT @ 20% |
|||
A20A | 112233 |
Bolt, pressure oil filter attachment upper frontTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
1 |
£1.22 Ex VAT @ 20% |
|||
A21 | HB0882 |
Bolt, pressure oil filter attachment upper rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
BH505321 |
BOLT 5/16 UNC X 4 INCH |
1 |
£4.18 Ex VAT @ 20% |
|||
A22 | HB0874 |
Bolt, pressure oil filter attachment lower rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
BH505241 |
BOLT 5/16 UNC X 3 INCH |
1 |
£2.28 Ex VAT @ 20% |
|||
A22A | 112231 |
Bolt, pressure oil filter attachment lower rearTriumph Catalogue Remarks: From Engine No. __________ |
1 | |||
BH505321 |
BOLT 5/16 UNC X 4 INCH |
1 |
£4.18 Ex VAT @ 20% |
|||
A23 | 055810 |
FRONT SEALING BLOCKRevington TR information: Sealing block, front of engine Tr2-4A. Consider original second hand part 055810SH |
1 | |||
A24 | 059381 |
Pad, sealing fitted in ends of block |
2 |
£1.21 Ex VAT @ 20% |
||
A25 | 056574 |
Screw, Sealing block attachment |
2 |
£2.05 Ex VAT @ 20% |
||
A26 | 060862 |
REAR OIL SEAL ASSEMBLYRevington TR information: This original oils seal arrangement is prone to severe leakage. This is due the inherent weakness of the reverse scroll design, where there is no physical contact between the seal and the crankshaft. The reverse scroll... READ MORE |
1 |
£87.40 Ex VAT @ 20% |
||
A27 | HU0755 |
Screw, set oil seal to cylinder blockThis item has been superceded by SH504051 - see below |
8 | |||
SH504051 |
SCREW 1/4 UNC X 5/8" |
8 |
£0.42 Ex VAT @ 20% |
|||
A27A | WL0207 |
Washer, spring, on screwThis item has been superceded by WS104070643 - see below |
8 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
8 |
£0.20 Ex VAT @ 20% |
|||
A28 | 105539 |
CYLINDER LINER (GRADED F.G.H.)Revington TR information: Liners 83mm Standard Sizes up to +40 available |
4 |
£104.11 Ex VAT @ 20% |
||
A29 | 108024 |
Gasket, linerTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
112789 |
Gasket, linerRevington TR information: Three thicknesses of figure of 8 gasket are available; 0.015" made from steel, 0.018" made from copper, and 0.021" made from aluminium or copper. The alternative thicknesses can be used to adjust the height of the... READ MORE |
2 |
£3.79 Ex VAT @ 20% |
|||
A29A | 112789 |
Gasket, linerTriumph Catalogue Remarks: From Engine No. 9173E |
2 |
£3.79 Ex VAT @ 20% |
||
A30 | 301251 |
FRONT ENGINE PLATERevington TR information: the pin is 056763 |
1 | |||
A31 | 056389 |
Washer, joint, between plate and cylinder block |
1 |
£2.24 Ex VAT @ 20% |
||
A31A | HU0856 |
Screw, set front plate attachmentThis item has been superceded by SH505061 - see below |
5 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
5 |
£0.90 Ex VAT @ 20% |
|||
A31B | WL0208 |
Washer, spring, on screwThis item has been superceded by WS105090853 - see below |
5 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
5 |
£0.25 Ex VAT @ 20% |
|||
A32 | 059180 |
FRONT ENGINE MOUNTINGRevington TR information: TR2-3B engine Mounting standard. This mounting has a shore hardness of 55/60. Consider 059180U 70 shore hardness if a slightly harder mounting is required for competition use or where significantly extra torque than standard is likely... READ MORE |
2 |
£15.64 Ex VAT @ 20% |
||
A32A | TN3209 |
Nut, nyloc, mounting to front engine plateThis item has been superceded by NY606121 - see below |
2 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
2 |
£1.44 Ex VAT @ 20% |
|||
A32B | 109582 |
Piece, packing, between engine mouinting and frameRevington TR information: SHim under engine mount to adjust engine height. Consider original second hand part 109582SH. |
A/R |
£7.43 Ex VAT @ 20% |
||
A32C | 106428 |
Bracket, steady, on both sides of mountingRevington TR information: Consider original second hand part number 106428SH. . |
4 |
£17.27 Ex VAT @ 20% |
||
A32D | HU0807 |
Screw, set, mounting and steady bracket to frameThis item has been superceded by SH605071 - see below |
2 | |||
SH605071 |
SCREW 5/16 UNF X 7/8 INCH |
2 |
£0.61 Ex VAT @ 20% |
|||
A32E | TN3208 |
Nut, nyloc, on screwThis item has been superceded by NY605111 - see below |
2 | |||
NY605111 |
NUT NYLOCK 5/16 UNF X 0.344" MEDIUM |
2 |
£0.38 Ex VAT @ 20% |
|||
A33 | 056638 |
OIL SUMP ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A33A | 115350 |
OIL SUMP ASSEMBLYTriumph Catalogue Remarks: From Engine No. 18902E |
1 | |||
A34 | 056646 |
Washer, joint, between sump and cylinder blockThis item has been superceded by 211123 - see below |
1 | |||
211123 |
GASKET SUMP TR2-4ARevington TR information: This is a thinner paper gasket that is more suitable for this application. If you have a joint which is irregular or not flat maybe try 211123-1 which is a cork gasket. Should you require a complete... READ MORE |
1 |
£4.60 Ex VAT @ 20% |
|||
A35 | V7535 |
Plug, oil, drainTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A35A | 114774 |
Plug, oil, drainTriumph Catalogue Remarks: From Engine No. 18902E |
1 |
£5.87 Ex VAT @ 20% |
||
A36 | WF0524 |
Washer, fibre, on screwTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
WF11014060 |
FIBRE WASHER 5/8 X 7/8 X 0.060" |
1 |
£0.53 Ex VAT @ 20% |
|||
A37 | 100749 |
Screw, set, sump to cylinder blockThis item has been superceded by SH505061 - see below |
16 | |||
SH505061 |
SCREW 5/16 UNC X 3/4 INCH |
16 |
£0.90 Ex VAT @ 20% |
|||
A37A | HU0855 |
Screw, set, sump to front sealing block |
1 | |||
A37B | 105220 |
Screw, set, sump, breather pipe clip and slave cylinder stay to blockThis item has been superceded by BH505101 - see below |
2 | |||
BH505101 |
BOLT 5/16 UNC X 1-1/4 INCH |
2 |
£1.22 Ex VAT @ 20% |
|||
A37C | WL0208 |
Washer, spring, on setscrewsThis item has been superceded by WS105090853 - see below |
19 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
19 |
£0.25 Ex VAT @ 20% |
|||
A38 | 102139 |
DipstickRevington TR information: Consider also 102139SH and 102139SHPC |
1 |
£31.63 Ex VAT @ 20% |
||
A39 | 032307 |
Washer, felt, on dipstick |
1 |
£1.82 Ex VAT @ 20% |
||
A40 | 201650 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
205020 |
BREATHER PIPE ASSEMBLYRevington TR information: Not available new. Use 205020SH or RTR1356 |
1 | ||||
A40A | 202126 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. 972E |
1 | |||
205020 |
BREATHER PIPE ASSEMBLYRevington TR information: Not available new. Use 205020SH or RTR1356 |
1 | ||||
A40B | 205020 |
BREATHER PIPE ASSEMBLYTriumph Catalogue Remarks: From Engine No. _____________ |
1 | |||
A41 | 106296 |
Clip, pipe to cylinder blockTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
120211 |
Bracket, pipe to cylinder blockRevington TR information: No Longer Available see 120211SH |
1 | ||||
A41A | 120211 |
Bracket, pipe to cylinder blockRevington TR information: No Longer Available see 120211SH |
1 | |||
A41B | WM0083 |
Washer, packing, under clipThis item has been superceded by WP10510250 - see below |
1 | |||
WP10510250 |
WASHER PLAIN 5/16" x 5/8" x 0.250"Revington TR information: 3/4" o/d is occassionally supplied if 5/8" o/d is not available as some english sizes are getting more difficult to obtain. |
1 |
£3.55 Ex VAT @ 20% |
|||
A42 | HB0805 |
Bolt, clip to pipeThis item has been superceded by SH605051 - see below |
1 | |||
SH605051 |
SCREW 5/16 UNF X 5/8 INCH |
1 |
£1.39 Ex VAT @ 20% |
|||
A43 | HN2008 |
Nut, locking boltThis item has been superceded by NP605081 - see below |
1 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
1 |
£0.17 Ex VAT @ 20% |
|||
A43A | WL0208 |
Washer, spring, under nutThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
A44 | 501415 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A44A | 503837 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 9350E |
1 | |||
A44B | 503838 |
COMBUSTION HEAD ASSEMBLY (Complete with Valves and Springs) Note :-503837 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A44C | 501209 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A44D | 503662 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 9350E |
1 | |||
A44E | 503663 |
COMBUSTION HEAD ASSEMBLY (Less Valves and Springs) Note :-503662 with Gasket 113168 may be used for replacement purposesTriumph Catalogue Remarks: From Engine No. 13052E |
1 | |||
A44F | PS1603 |
Plug, core, top face of combustion headRevington TR information: This Core Plug is threaded. The thread is 1" UNF x 12TPI, |
1 |
£6.96 Ex VAT @ 20% |
||
A44G | 200906 |
Plate, compression, between combustion head and cylinder block |
1 | |||
A44H | 202775 |
Gasket, combustion head to cylinder block Note :-For use In Countries where high octane fuel Is unobtainable, to provide a lower compression ratioRevington TR information: TR2-4A Steel shim head gasket 87mm - 0.5mm (0.020") thick when compressed This Gasket can be shaped to suit 87-89mm liner diameters and can also be used on engines with 83 or 86mm liners. This gasket... READ MORE |
1 |
£124.44 Ex VAT @ 20% |
||
A45 | 100792 |
Tube, sealing, push rodRevington TR information: These tubes, made from Aluminium, need to be pressed gently in. Use a hand press, not a fly press. Our experience is that both aluminium and steel tubes were used by Triumph in original heads. We... READ MORE |
8 | |||
A46 | 058923 |
Guide, valve, InletRevington TR information: Standard steel inlet Valve Guide fitted to TR2-6 inclusive. Also used in the exhaust position on TR4 from CT27411 and all TR4A. Suitable for valves having a shaft diameter of 5/16" (7.94mm), the guide has an... READ MORE |
4 |
£1.84 Ex VAT @ 20% |
||
A47 | 108239 |
Guide, valve, exhaustRevington TR information: Standard steel exhaust Valve Guide fitted to TR2-4 up to CT27410. Suitable for valves having a shaft diameter of 3/8" (9.53mm), the guide has an outside diameter of 17/32" (13.49mm). The guide is 2.0625" long The... READ MORE |
4 |
£9.96 Ex VAT @ 20% |
||
A47A | 111913 |
Insert, valve seat, Inlet |
A/R | |||
A47B | 102941 |
Insert, valve seat, exhaust |
A/R | |||
A48 | 108242 |
Collar, exhaust valve guideRevington TR information: consider second hand original part 108242SH |
4 |
£5.98 Ex VAT @ 20% |
||
A48A | 027378 |
Plug, core, rear face of head |
1 |
£2.18 Ex VAT @ 20% |
||
A48B | 114774 |
Plug, screwed (Not required when heater Is fitted)Revington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
A48D | HU0953 |
Screw, set, rocker oil feedThis item has been superceded by SH506031 - see below |
1 | |||
SH506031 |
SCREW HEX 3/8UNC X 3/8 INCH |
1 | ||||
A49C | 500464 |
Washer, copper, on setscrewThis item has been superceded by WC10610080 - see below |
1 | |||
WC10610080 |
WASHER COPPER 3/8 X 5/8 X .080" |
1 |
£1.81 Ex VAT @ 20% |
|||
A49 | 111717 |
Stud, rocker, pedestalThis item has been superceded by ST706251 - see below |
4 | |||
ST706251 |
STUD 3/8 X3-1/8" 1-1/8"UNF1/2"UNC |
4 |
£3.85 Ex VAT @ 20% |
|||
A50 | 059011 |
Stud, rocker, coverThis item has been superceded by ST705301 - see below |
2 | |||
ST705301 |
STUD 5/16 X 3-3/4" 5/8UNF+1/2UNCRevington TR information: This stud is mainly used for holding the standard rocker cover on TR2-4A. If you have an aluminium rocker cover fitted then a slightly longer stud ST705341 will most likely be required. Consider also fitting kit... READ MORE |
2 |
£4.26 Ex VAT @ 20% |
|||
A50A | 107055 |
Stud, manifold attachment, 2.38" longThis item has been superceded by ST506191 - see below |
2 | |||
ST506191 |
STUD 3/8 X 2-3/8 UNC+ UNC |
2 |
£4.18 Ex VAT @ 20% |
|||
A50B | 102474 |
Stud, manifold attachment, 2.06" longThis item has been superceded by ST506162 - see below |
4 | |||
ST506162 |
STUD 3/8 X 2.06" UNC+ UNC |
4 |
£2.63 Ex VAT @ 20% |
|||
A50C | 058688 |
Stud, manifold attachment, 1 11/16 longTriumph Catalogue Remarks: From Engine No. 1 |
2 | |||
ST506132 |
STUD 3/8 X 1-11/16" UNC+ UNC |
2 |
£2.21 Ex VAT @ 20% |
|||
A50D | 058688 |
Stud, manifoldTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
ST506132 |
STUD 3/8 X 1-11/16" UNC+ UNC |
1 |
£2.21 Ex VAT @ 20% |
|||
A50E | 058917 |
Stud, manifoldTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
ST506152 |
STUD 3/8 X 1-15/16" UNC+ UNC |
1 |
£4.68 Ex VAT @ 20% |
|||
A50F | WP0033 |
WasherTriumph Catalogue Remarks: From Engine No. _________ |
1 | |||
WP10610057 |
WASHER PLAIN 3/8 X 5/8 X 0.057" |
1 |
£0.65 Ex VAT @ 20% |
|||
A50G | DP0512 |
Dowel, manifold locatingThis item has been superceded by DP514 - see below |
2 | |||
DP514 |
DOWEL 5/16 DIA X 7/8" LONG |
2 |
£1.78 Ex VAT @ 20% |
|||
A51 | 202127 |
Gasket, between combustion head and cylinder blockRevington TR information: TR2 Head Gasket 83mm No longer available. Use 205481 or gasket set 505281. |
1 | |||
A52 | 110962 |
Nut, combustion head attachmentRevington TR information: 10 required |
10 |
£2.94 Ex VAT @ 20% |
||
A52A | WP0029 |
Washer, plain, under nutThis item has been superceded by WP108140753 - see below |
10 | |||
WP108140753 |
WASHER PLAIN 1/2" x 7/8" X 0.075" HARDENEDRevington TR information: Hardened cylinder head stud attachment Washer ½" Internal diameter x 7/8" Outside diameter for underneath the cylinder head nut of TR2-TR4A and other engines with ½" diameter studs. |
10 |
£3.12 Ex VAT @ 20% |
|||
A52B | 030123 |
Wire (lead) under nut |
A/R | |||
A52C | 121231 |
Eye, lifting, assembly, frontRevington TR information: lifting Eye, front of the engine, TR2-TR4A and any other car with a 4 cylinder TR or vanguard type engine. This part has been remanufactured to the original design in stainless steel and is supplied unpainted.... READ MORE |
1 |
£60.80 Ex VAT @ 20% |
||
A52D | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A53 | 107626 |
Valve, InletRevington TR information: Inlet Valve standard TR2-4A. We have good stock of second hand valves too for those wanting either a cheaper or an original part. in addition we have tow valves available with larger heads. ... READ MORE |
4 |
£14.42 Ex VAT @ 20% |
||
A54 | 108806 |
Valve, exhaust |
4 |
£21.86 Ex VAT @ 20% |
||
A55 | 107492 |
Spring, valve, outer |
8 |
£5.90 Ex VAT @ 20% |
||
A56 | 107493 |
Spring, valve, InnerRevington TR information: Our stock are genuine Leyland parts |
8 |
£3.66 Ex VAT @ 20% |
||
A57 | 102564 |
Spring, auxiliary, exhaust valveRevington TR information: This valve spring is suitable for TR5 and TR6PI up to engine number CP54584 when used with an outer spring 149633 on all valves. Consider spring set RTR1175 |
4 |
£5.71 Ex VAT @ 20% |
||
A58 | 105803 |
Collar, valve springRevington TR information: TR2-4 valve spring Cap. As this part does not wear out, RevingtonTR prefer to supply original second hand parts which can be guaranteed to be the correct shape and material specification. Order 105803SH below. This part... READ MORE |
8 |
£8.10 Ex VAT @ 20% |
||
A59 | 106663 |
Cone, split, retaining collar on valveRevington TR information: There are two collet halves per valve. This part number is for two halves therfore 2 pieces are supplied and priced as 1 collet = 2 halves. Note - Some suppliers sell just 1 half. |
8 prs. |
£4.03 Ex VAT @ 20% |
||
A60 | 057933 |
VALVE TAPPETRevington TR information: Revington TR recommends using an uprated cam follower in favour of the standard part. These are tuftrided and have a drain hole to allow oil to dribble onto the cam lobe. Order part number RTR1024 below.... READ MORE |
8 |
£9.83 Ex VAT @ 20% |
||
A61 | 106968 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 1 |
8 |
£23.94 Ex VAT @ 20% |
||
A61A | 114035 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 12961E |
8 | |||
A61B | 106968 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 55691E |
8 |
£23.94 Ex VAT @ 20% |
||
A61C | 108616 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 1 |
8 | |||
A61D | 114048 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 12961E |
8 | |||
A61E | 108616 |
Push rod assemblyTriumph Catalogue Remarks: From Engine No. 55691E |
8 | |||
A62 | 111064 |
ROCKER SHAFTRevington TR information: Consider tuftrided part RTR1103. |
1 |
£49.22 Ex VAT @ 20% |
||
A63 | 055822 |
Pedestal, rocker, drilledTriumph Catalogue Remarks: From Engine No. ______ |
1 | |||
112545 |
Pedestal, rocker, drilledRevington TR information: Not available new singularly. Order second hand part 112545SH or new set 112545X. The non-drilled part is 112546SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
1 | ||||
A63A | 112545 |
Pedestal, rocker, drilledTriumph Catalogue Remarks: From Engine No. 12564E |
1 | |||
A64 | 042880 |
Screw, locking, pedestal to shaft |
1 | |||
A64A | 052337 |
Washer, shakeproof, on screwThis item has been superceded by WK7607 - see below |
1 | |||
WK7607 |
LOCK WASHER CUPPED 1/4" |
1 |
£0.94 Ex VAT @ 20% |
|||
A65 | 055823 |
Pedestal, rocker, plainTriumph Catalogue Remarks: From Engine No. ______ |
3 | |||
112546 |
Pedestal, rocker, plainRevington TR information: Not available new singularly. Order second hand part 112546SH or new set 112545X. The drilled part is 112545SH. Consider also improved Aluminium rocker pedestal set 112545X which includes front and rear pedestals with end... READ MORE |
3 | ||||
A65A | 112546 |
Pedestal, rocker, plainTriumph Catalogue Remarks: From Engine No. 12564E |
3 | |||
A66 | HN2009 |
Nut, rocker, pedestal to combustion headThis item has been superceded by NP606111 - see below |
4 | |||
NP606111 |
NUT PLAIN 3/8 UNF X 11/32" (STD) |
4 |
£0.14 Ex VAT @ 20% |
|||
A67 | WL0209 |
Washer, spring, under nutTriumph Catalogue Remarks: Used with steel Rocker Pedestals only. Use WP009 with aluminium Rocker Pedestals |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
A68 | 108012 |
Rocker, No. 1 assembly |
4 |
£18.50 Ex VAT @ 20% |
||
A68A | 044370 |
Bush, rocker |
8 |
£3.68 Ex VAT @ 20% |
||
A69 | 108014 |
Rocker, No. 2 assembly |
4 |
£12.31 Ex VAT @ 20% |
||
A69A | 044370 |
Bush, rocker |
8 |
£3.68 Ex VAT @ 20% |
||
A70 | 109495 |
Ball-pin (adjustable) in rockersRevington TR information: All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now superceded to 51K1178). TR250 and TR6CC... READ MORE |
8 |
£7.02 Ex VAT @ 20% |
||
A71 | 057110 |
Nut, locking ball-pinThis item has been superceded by 51K1178 - see below |
8 | |||
51K1178 |
LOCKNUT ROCKER ADJ.Revington TR information: 5/16" UNF locknut rocker adjusting TR2-6 All TR2-6 use a similar rocker adjusting screw and nut principle. In fact all TR2-4A and TR5, TR6CP, CF and CR use the same screw 109495 and nut 057110 (now... READ MORE |
8 |
£0.65 Ex VAT @ 20% |
|||
A72 | 056434 |
Spring, rocker, centreTriumph Catalogue Remarks: From Engine No. _______ |
1 | |||
A72A | 128074 |
Spring, rocker, centreTriumph Catalogue Remarks: From Engine No. _______ |
1 | |||
A73 | 055873 |
Spring, rocker, intermediateTriumph Catalogue Remarks: From Engine No. _______ |
2 | |||
A73A | 128075 |
Spring, rocker, intermediateTriumph Catalogue Remarks: From Engine No. _______ |
2 | |||
A74 | 044630 |
Spring, rocker, outerThis item has been superceded by WT11016 - see below |
2 | |||
WT11016 |
WASHER THACKERY 5/8 INCHRevington TR information: No longer available |
2 | ||||
A75 | 060733 |
Collar, on ends of shaft |
2 | |||
A76 | 058334 |
Pin (Mills), securing collarThis item has been superceded by 500975 - see below |
2 | |||
500975 |
MILLS PIN 1/8"x1" |
2 |
£1.63 Ex VAT @ 20% |
|||
A77 | 302157 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
A77A | 302610 |
ROCKER COVER ASSEMBLYTriumph Catalogue Remarks: From Engine No. 18230E |
1 | |||
A78 | 106386 |
Cap, oil filler and breather assemblyTriumph Catalogue Remarks: From Engine No. 1 |
1 | |||
113569 |
Cap, oil filler and breather assemblyRevington TR information: consider Second hand part 113569SH |
1 |
£61.80 Ex VAT @ 20% |
|||
A78A | 113569 |
Cap, oil filler and breather assemblyTriumph Catalogue Remarks: From Engine No. 17372E |
1 |
£61.80 Ex VAT @ 20% |
||
A79 | 055943 |
Washer, joint, cover to combustion head (Alternative to Part No. 121219)This item has been superceded by GEG437 - see below |
1 | |||
GEG437 |
GASKET ROCKER COVER TR2-4ARevington TR information: Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess. |
1 |
£7.45 Ex VAT @ 20% |
|||
A79A | 121219 |
Washer, joint, cover to combustion head (Alternative to Part No. 55943)This item has been superceded by GEG437 - see below |
1 | |||
GEG437 |
GASKET ROCKER COVER TR2-4ARevington TR information: Our gasket is approx 6mm thick. Beware of thinner alternatives that are not as thick as the rocker cover recess. |
1 |
£7.45 Ex VAT @ 20% |
|||
A79B | 121752 |
Bracket, lifting, rearRevington TR information: Engine Lifting Eye rear TR4A. Use our improved part 121752-1 which fits without the need to remove a head stud nut. Consider second hand part 121752SH. |
1 |
£17.04 Ex VAT @ 20% |
||
A80 | YN2908 |
Nut, nyloc, rocker cover attachmentThis item has been superceded by NY605141 - see below |
2 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
2 | ||||
A80A | WP0008 |
Washer, plain, under nutThis item has been superceded by WP10510075 - see below |
2 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
2 |
£0.44 Ex VAT @ 20% |
|||
A80B | WF0508 |
Washer, fibre, under nutThis item has been superceded by WF10510056 - see below |
2 | |||
WF10510056 |
WASHER FIBRE 5/16 I/D X 5/8 OD |
2 |
£0.80 Ex VAT @ 20% |