Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate P - GEARBOX: CASING, TOP COVER AND MOUNTING.
Also in this listing
Gear lever grommet item P75APlate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
P1AA | 510920 |
GEARBOX UNIT (less Gear Lever)Revington TR information: Not available new use our gearbox exchange/rebuild service detailed under part number G/BOXEX |
1 | |||
P1BB | 511499 |
GEARBOX UNIT (less Gear Lever)Triumph Catalogue Remarks: Reconditioned Unit |
1 | |||
G/BOXEX |
obsolete use RTR1066EXRevington TR information: This part number covers all TR2-6 gearboxes on an exchange basis like for like. Conditions under which Revington TR supply outright or exchange gearboxes and overdrives, or work on customers units We have a strict warranty policy... READ MORE |
1 | ||||
P1CC | 510921 |
GEARBOX UNIT (OVERDRIVE) (less Gear Lever)Revington TR information: Not available new use our gearbox and overdrive exchange/rebuild service detailed under part number G/BOXEX and O/DEXA |
1 | |||
P1DD | 511500 |
GEARBOX UNIT (OVERDRIVE) (less Gear Lever)Triumph Catalogue Remarks: Reconditioned unit |
1 | |||
RTR1066EX |
TR2-6 GEARBOX REBUILD LIKE for LIKERevington TR information: This part number covers all TR2-6 Gearboxes on an exchange basis like for like as well as rebuilding customers units and the rebuilding of our core units when we supply outright. Special terms apply. As Revington... READ MORE |
1 |
£2000.71 Ex VAT @ 20% |
|||
Comprising: Top Cover Assembly No. 511027, Mainahaft No. 208052 and all other details in Gearbox Section less Gearbox Extension No. 305048 |
||||||
P1 | 210622 |
GEARBOX AND CLUTCH HOUSINGRevington TR information: TR4A-6 (all models) Bell Housing & Gear Case. Only two types of gear case were used on TR4-6. The TR4 being the first model used a gear casing (part number 304692) where the bell housing flange... READ MORE |
1 | |||
P2 | 137651 |
Bush, clutch shaft housingRevington TR information: These bearings are narrow and give rise to excessive cross shaft wear. Consider using bronze bush RTR1204 that gives a larger support area |
1 |
£9.08 Ex VAT @ 20% |
||
P2A | 060420 |
Plug, core, front end of gearbox |
1 | |||
P3 | 114774 |
Plug, oil level, in side of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
P4 | 114774 |
Plug, drain, in bottom of gearboxRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
P5 | 100157 |
FRONT END COVERRevington TR information: TR2-6 Gearbox nose with 1.66" (42.61mm) diameter sliding section to accommodate standard 31.75mm (1.25") diameter input shaft and standard release carrier. Consider original second hand part number 100157SH or where necessary Triumph 2000/2500 gearbox Nose... READ MORE |
1 |
£63.24 Ex VAT @ 20% |
||
P6 | 060215 |
Seal, in front end coverThis item has been superceded by 141756 - see below |
1 | |||
141756 |
SEAL OIL GEARBOX FRONT TR2-6Revington TR information: Gearbox nose seal TR2-6 and all similar gearboxes, T2000, T2500, Dolomite, Stage ,etc. Our seal stock is genuine Leyland new old stock, not cheap reproductions. |
1 |
£14.42 Ex VAT @ 20% |
|||
P7 | 059537 |
Washer, joint Front end cover to gearboxRevington TR information: Consider gasket kit RTR1003 |
1 |
£1.39 Ex VAT @ 20% |
||
P8 | WU3857 |
Screw, wedglok Front end cover to gearboxThis item has been superceded by 155542 - see below |
4 | |||
155542 |
WEDGLOK SCREW 5/16 |
4 |
£2.32 Ex VAT @ 20% |
|||
P9 | 114034 |
Washer, plain Front end cover to gearboxThis item has been superceded by WC10510050 - see below |
4 | |||
WC10510050 |
WASHER COPPER 5/16 X 5/8 X .050 |
4 |
£1.30 Ex VAT @ 20% |
|||
P10 | 055773 |
Cover, countershaft end |
1 |
£10.01 Ex VAT @ 20% |
||
P11 | 055774 |
Gasket Countershaft end cover to Pit gearbox |
1 |
£1.80 Ex VAT @ 20% |
||
P11A | WU3857 |
Screw, wedglok Countershaft end cover to Pit gearboxThis item has been superceded by 155542 - see below |
2 | |||
155542 |
WEDGLOK SCREW 5/16 |
2 |
£2.32 Ex VAT @ 20% |
|||
P13 | 114034 |
Washer, plain Countershaft end cover to Pit gearboxThis item has been superceded by WC10510050 - see below |
2 | |||
WC10510050 |
WASHER COPPER 5/16 X 5/8 X .050 |
2 |
£1.30 Ex VAT @ 20% |
|||
P14 | 305048 |
GEARBOX EXTENSIONRevington TR information: Gearbox extension ( none overdrive. Not available new, use 305048SH |
1 | |||
P15 | 058958 |
Seal, oil, rear of extensionThis item has been superceded by 146129 - see below |
1 | |||
146129 |
OIL SEAL REAR GEAR BOX & A TYPE O/D |
1 |
£12.26 Ex VAT @ 20% |
|||
P16 | 132465 |
Washer, paper Extension to gearbox |
1 |
£2.42 Ex VAT @ 20% |
||
P17 | HU0858 |
Screw, set Extension to gearboxThis item has been superceded by SH505081 - see below |
5 | |||
SH505081 |
SCREW 5/16 UNC X 1" |
5 |
£0.82 Ex VAT @ 20% |
|||
P17A | HB0866 |
Bolt Extension to gearboxThis item has been superceded by BH505161 - see below |
1 | |||
BH505161 |
BOLT 5/16 UNC X 2" |
1 |
£1.78 Ex VAT @ 20% |
|||
P18 | WL0208 |
Washer, lock Extension to gearboxThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
P18A | 107749 |
SPEEDO DRIVEN GEAR AND BEARING ASSEMBLYRevington TR information: Consider part 146542 |
1 |
£126.67 Ex VAT @ 20% |
||
P19 | 058969 |
Gear, speedo drivenRevington TR information: Steel TR2-4A speedometer drive gear Not available new. Use 058969SH TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes... READ MORE |
1 | |||
P20 | 107747 |
Bearing, speedo driven gearRevington TR information: Brass speedometer drive bearing TR2-4A TR2-4A Gearboxes without overdrive and overdrives used a brass bearing and a steel gear with 15 teeth 107747 Brass Bearing Housing 058969 Steel Gear 15 tooth TR5-6 Gearboxes without overdrive and 'A' type... READ MORE |
1 | |||
P21 | 060247 |
Seal, oil, between screwed end and bearing |
1 |
£6.00 Ex VAT @ 20% |
||
P22 | 060246 |
End, screwed |
1 |
£4.14 Ex VAT @ 20% |
||
P23 | 107750 |
Ring, sealThis item has been superceded by 147751 - see below |
1 | |||
147751 |
O RING |
1 |
£1.38 Ex VAT @ 20% |
|||
P24 | 107746 |
Screw, locking Bearing to extensionRevington TR information: Special Pinch Bolt holding the speedometer drive into the gearbox casing. Not available new. Use 107746SH or modify Screw SH505121 as described in 'More About This Part'. This special bolt has an overall length of... READ MORE |
1 | |||
P25 | WL0208 |
Washer, lock Bearing to extensionThis item has been superceded by WS105090853 - see below |
1 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
1 |
£0.25 Ex VAT @ 20% |
|||
P25A | 509852 |
TOP COVER ASSEMBLY |
1 | |||
P26 | 511027 |
Cover, top, complete with plugsThis item has been superceded by TKC1000 - see below |
1 | |||
TKC1000 |
TOP COVER |
1 | ||||
P27 | 108114 |
Plug, fitted In coverTriumph Catalogue Remarks: (2 off not required with Overdrive fitted, 1 off not required with Reverse Light fitted) |
3 |
£3.47 Ex VAT @ 20% |
||
P28 | 501258 |
Washer, copper, on plugThis item has been superceded by 6K433 - see below |
3 | |||
6K433 |
WASHER CRUSH COPPER 5/8"Revington TR information: This part is a 5/8" washer. Some on the market under this number are 3/4". |
3 |
£3.11 Ex VAT @ 20% |
|||
P29 | 104449 |
Plug, welch Interlock aperture |
1 |
£1.90 Ex VAT @ 20% |
||
P30 | 104449 |
Plug, welch selector shafts |
3 |
£1.90 Ex VAT @ 20% |
||
P31 | 054505 |
Plug, welch in sides of top cover |
2 |
£2.39 Ex VAT @ 20% |
||
P32 | 128066 |
Shaft, selector 1st and 2ndRevington TR information: Consider second hand original part 128066SH |
1 |
£21.47 Ex VAT @ 20% |
||
P33 | 129986 |
Shaft, selector 3rd and topThis item has been superceded by 156373 - see below |
1 | |||
156373 |
3/4 SELECT RODRevington TR information: No longer available use second hand part 156373SH |
1 |
£70.01 Ex VAT @ 20% |
|||
P34 | 132389 |
Shaft, selector ReverseThis item has been superceded by 209902 - see below |
1 | |||
209902 |
SELECTOR SHAFT TR6Revington TR information: Our stock is genuine Stanpart |
1 | ||||
P35 | 127386 |
Selector 1st and 2ndRevington TR information: Selector 1st and 2nd. Not currently available new (July 2018) however we usually have second hand parts for sale |
1 | |||
P36 | 127385 |
Selector ReverseRevington TR information: Selector reverse. When not available new, order second hand part 127385SH |
1 |
£75.88 Ex VAT @ 20% |
||
P37 | 128067 |
Fork, selector 1st and 2ndRevington TR information: Fork Selector 1st and 2nd. Not available new however we usually have second hand parts for sale |
1 | |||
P38 | 127387 |
Fork, selector 3rd and topRevington TR information: Not currently available. use second hand part 127387SH |
1 | |||
P39 | 129780 |
Actuator, reverse |
1 |
£15.19 Ex VAT @ 20% |
||
P40 | 128063 |
Sleeve, 1st/2nd shaftRevington TR information: Tube on 1st and 2nd shaft 74.6mm long Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm long |
1 | |||
P41 | 117811 |
Sleeve, 3rd and top shaftRevington TR information: steel tube 3/4th speed change shaft TR4-6 gearbox top cover Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft 50.4mm... READ MORE |
1 |
£9.53 Ex VAT @ 20% |
||
P42 | 129779 |
Sleeve, reverse selector shaftRevington TR information: Tube on reverse shaft 50.4mm long. Our stock is genuine Leyland Three tubes are used on the selector shafts of TR4-6 gearboxes 128063 on 1st and 2nd shaft 74.6mm long 117811 on 3rd and 4th shaft 82.2mm long 129779 on reverse shaft... READ MORE |
1 |
£2.29 Ex VAT @ 20% |
||
P43 | 122653 |
Screw, taper, securing selectors and forks to shaft |
5 |
£7.14 Ex VAT @ 20% |
||
P44 | 106050 |
Ring, sealing, selector shaftThis item has been superceded by OR1008106 - see below |
3 | |||
OR1008106 |
'O' GEARBOX SEALING RING |
3 |
£0.95 Ex VAT @ 20% |
|||
P45 | 106051 |
Plate, cover, over sealing ring |
1 |
£7.94 Ex VAT @ 20% |
||
P46 | HU0704 |
Screw, set Cover plate to top coverThis item has been superceded by SH604041 - see below |
2 | |||
SH604041 |
SCREW 1/4 UNF X 1/2 INCH |
2 |
£0.58 Ex VAT @ 20% |
|||
P47 | WL0207 |
Washer, lock Cover plate to top coverThis item has been superceded by WS104070643 - see below |
2 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
2 |
£0.20 Ex VAT @ 20% |
|||
P48 | 105788 |
Roller, interlock Fitted in top cover |
1 |
£4.58 Ex VAT @ 20% |
||
P49 | BL0024 |
Ball, interlock Fitted in top coverThis item has been superceded by BLS112 - see below |
2 | |||
BLS112 |
STEEL BALL-3/8 |
2 |
£0.59 Ex VAT @ 20% |
|||
P50 | BL0024 |
Ball, selector shaft, 1st and 2nd gearThis item has been superceded by BLS112 - see below |
1 | |||
BLS112 |
STEEL BALL-3/8 |
1 |
£0.59 Ex VAT @ 20% |
|||
P51 | 101236 |
Spring, bailThis item has been superceded by 155632 - see below |
1 | |||
155632 |
SPRING BALL G/BOX SELECTION TR6 |
1 |
£4.25 Ex VAT @ 20% |
|||
P52 | 106481 |
Plunger, selector shaft, 3rd and top |
1 |
£17.56 Ex VAT @ 20% |
||
P53 | 106489 |
Spring, plunger |
1 |
£1.04 Ex VAT @ 20% |
||
P54 | 109401 |
Piece, distance, plungerRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
P55 | 132388 |
Plunger, reverse selector |
1 | |||
P56 | 106489 |
Spring, reverse plunger |
1 |
£1.04 Ex VAT @ 20% |
||
P57 | 109401 |
Piece, distance, selector shaft plunger-ReverseRevington TR information: No longer available, use second hand part 109401SH |
1 | |||
P58 | 108166 |
Plug, retaining springRevington TR information: No longer available, we can however supply second hand parts 108166SH |
3 | |||
P59 | 105758 |
Washer, joint, top cover |
1 |
£1.73 Ex VAT @ 20% |
||
P60 | HB0873 |
Bolt Top cover attachmentThis item has been superceded by BH505241 - see below |
2 | |||
BH505241 |
BOLT 5/16 UNC X 3 INCH |
2 |
£2.28 Ex VAT @ 20% |
|||
P61 | HB0871 |
Bolt Top cover attachmentThis item has been superceded by BH505161 - see below |
2 | |||
BH505161 |
BOLT 5/16 UNC X 2" |
2 |
£1.78 Ex VAT @ 20% |
|||
P62 | 056370 |
Screw, set Top cover attachment |
4 |
£3.80 Ex VAT @ 20% |
||
P63 | WL0208 |
Washer, lock Top cover attachmentThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
P64 | 143624 |
CHANGE SPEED LEVER ASSEMBLYRevington TR information: Not available new use second hand part number 143624SH. There are 4 basic types of gear lever fitted to TR2-6, which are all interchangeable, provided the correct top cover and fixings are used. There are 4... READ MORE |
1 | |||
P65 | 112424 |
Plunger In ball end |
1 |
£5.98 Ex VAT @ 20% |
||
P66 | 137988 |
Spring In ball endThis item has been superceded by 106388 - see below |
1 | |||
106388 |
SYNCHRO/G/LEVER SPRING 3/8 |
1 |
£1.60 Ex VAT @ 20% |
|||
P67 | 109531 |
Spring Fitted under capThis item has been superceded by 145796 - see below |
1 | |||
145796 |
SPRING UNDER G/L CAPRevington TR information: Spring gear lever, TR2-6CC/CP. Whilst this spring is unavailable, consider original second hand part number 145796SH. This spring had 6 coils and has an internal diameter of 16mm where the spring fits over the gear lever.... READ MORE |
1 | ||||
P68 | 112442 |
Retainer, spring Fitted under capRevington TR information: No longer vailable, use second hand part 112442SH |
1 | |||
P69 | 131246 |
KnobRevington TR information: Fitted up to CP53853 and now available new. This knob is a plain black sphere with no logo. Consider second hand part 131246SH or you can use part number 144095 but reverse is on the left... READ MORE |
1 |
£48.46 Ex VAT @ 20% |
||
P70 | 506157 |
Nut, jamThis item has been superceded by NP505064 - see below |
1 | |||
NP505064 |
NUT PLAIN 5/16 UNC x 3/16" TALL STAINLESS STEELRevington TR information: Stainless Steel locking nut double champhered specifically intended for holding on gear lever knobs as it can be polished. |
1 |
£0.97 Ex VAT @ 20% |
|||
P71 | 105787 |
Cap, change speed leverThis item has been superceded by 140816 - see below |
1 | |||
140816 |
CAP TOP COVER EARLY 3 HOLESRevington TR information: Not available new use second hand part 140816SH. |
1 | ||||
P72 | HU0703 |
Screw, set Cap to top coverThis item has been superceded by SH604031 - see below |
1 | |||
SH604031 |
SCREW 1/4 UNF X 3/8 INCH |
1 |
£3.68 Ex VAT @ 20% |
|||
P73 | WL0207 |
Washer, lock Cap to top coverThis item has been superceded by WS104070643 - see below |
1 | |||
WS104070643 |
WASHER SPRING 1/4" RECT SECTION |
1 |
£0.20 Ex VAT @ 20% |
|||
P74 | HB0727 |
Bolt Lever to top coverThis item has been superceded by BH604261 - see below |
1 | |||
BH604261 |
BOLT 1/4 UNF X 3-1/4 INCH |
1 |
£0.74 Ex VAT @ 20% |
|||
P75 | TN3207 |
Nut, nyloc Lever to top coverThis item has been superceded by NY604101 - see below |
1 | |||
NY604101 |
NUT NYLOC 1/4 UNF X 5/16 |
1 |
£0.56 Ex VAT @ 20% |
|||
P75A | 709313 |
Grommet, gear lever UpperTriumph Catalogue Remarks: Up to Comm. No. CTC57521 |
1 | |||
709328 |
Grommet, gear lever UpperRevington TR information: This is the single grommet without the upper vinyl trim. 631881 does include both items if required. |
1 |
£8.28 Ex VAT @ 20% |
|||
P75B | 709312 |
Grommet, gear lever LowerTriumph Catalogue Remarks: Up to Comm. No. CTC57522 |
1 | |||
709329 |
Grommet, gear lever LowerRevington TR information: Upper grommet is linked below. |
1 |
£17.30 Ex VAT @ 20% |
|||
P75C | 709328 |
Grommet, gear lever UpperTriumph Catalogue Remarks: From Comm. No. CTC57522 and future |
1 |
£8.28 Ex VAT @ 20% |
||
P75D | 709329 |
Grommet, gear lever LowerTriumph Catalogue Remarks: From Comm. No. CTC57522 and future |
£17.30 Ex VAT @ 20% |
|||
Note:-When either 709313 or 709312 need renewal order 1 of each 709328 and 709329 |
||||||
GEARBOX ATTACHMENT DETAILS |
6 | |||||
P76E | HU0860 |
Screw, set Gearbox to engineThis item has been superceded by BH605101 - see below |
||||
BH605101 |
BOLT 5/16 UNF X 1-1/4 INCHRevington TR information: For dynamo mounting detail see plate M in the TR4A original parts book or web site. |
£1.37 Ex VAT @ 20% |
||||
P76F | WL0208 |
Washer, lock Gearbox to engineThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
P76G | HN2008 |
Nut Gearbox to engineThis item has been superceded by NP605081 - see below |
3 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
3 |
£0.17 Ex VAT @ 20% |
|||
P76H | WL020B |
Washer, lock Gearbox to engineThis item has been superceded by WS105090853 - see below |
3 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
3 |
£0.25 Ex VAT @ 20% |
|||
P76 | 104086 |
REAR ENGINE MOUNTINGRevington TR information: This standard Mounting supporting the gearbox or overdrive is made with 55/60 shore hardness rubber. For competition or where significantly extra torque than standard is likely to be applied to the engine mountings use uprated part... READ MORE |
1 |
£21.62 Ex VAT @ 20% |
||
P77 | 132951 |
Strap, anti-vibration Gearbox extension to top coverRevington TR information: Not available new, use second hand part 132951SH 131711 was fitted up to gearbox CT17814. 132951 was fitted from CT17815. They are identical other than part number 132951 has an extra hole just above the... READ MORE |
1 | |||
P78 | 131690 |
Washer, spacing Gearbox extension to top coverRevington TR information: This spacer 1" outside diameter, 0.53" internal diameter and 1/4" thick is used to space anti-vibration Strap 131711 off the 'A' type gearbox mounting so that it will line up with the ... gear lever... READ MORE |
1 |
£2.41 Ex VAT @ 20% |
||
P79 | WM0093 |
Washer, plain Gearbox extension to top coverThis item has been superceded by WP10410130 - see below |
1 | |||
WP10410130 |
WASHER PLAIN 1/4" x 5/8" x 0.130" |
1 |
£1.62 Ex VAT @ 20% |
|||
P79A | 144314 |
WEIGHT AND BUSH ASSEMBLY,Triumph Catalogue Remarks: Normal condition |
1 | |||
132604 |
VIBRATION DAMPERRevington TR information: Fitted to TR4 from approximately CT18000 on and retro fitted by dealers in accordance with Service Information sheet 2/53, the damper was intended to reduce any vibration that occurred between 2700 and 3000 RPM. Two types... READ MORE |
1 | ||||
P79B | 132604 |
VIBRATION DAMPERTriumph Catalogue Remarks: Overdrive condition |
1 | |||
P79C | 132607 |
Clip, vibration damperRevington TR information: This clip supports vibration damper 132604 on the back of the TR4 gearbox |
1 | |||
P79D | HB1025 |
Bolt Securing weight to clip |
1 | |||
P79E | WP1069 |
Washer, plain Securing weight to clip |
1 | |||
P79F | YN2910 |
Nut, nyloc Securing weight to clipThis item has been superceded by NY607171 - see below |
1 | |||
NY607171 |
NYLOC 7/16 UNF X 17/32" (.515")TALL 11/16"AF |
1 |
£1.49 Ex VAT @ 20% |
|||
P79G | 132608 |
Strap, vibration damperRevington TR information: This strap joins anti-vibration strap 132951 ro vibration damper 132604 131711 was fitted up to gearbox CT17814. 132951 was fitted from CT17815. They are identical other than part number 132951 has an extra hole just above... READ MORE |
1 | |||
P79H | HU0806 |
Screw, Set Securing clip to strapThis item has been superceded by SH605061 - see below |
1 | |||
SH605061 |
SCREW 5/16 UNF X 3/4 INCH |
1 |
£0.54 Ex VAT @ 20% |
|||
P79I | H80811 |
Bolt Securing clip to strapThis item has been superceded by BH605111 - see below |
1 | |||
BH605111 |
BOLT 5/16 UNF X 1-3/8 INCHRevington TR information: For dynamo mounting detail see plate M in the TR4A original parts book or web site. |
1 |
£1.08 Ex VAT @ 20% |
|||
P79J | YN2908 |
Nut, nyloc Securing clip to strapThis item has been superceded by NY605141 - see below |
1 | |||
NY605141 |
NYLOC 5/16 UNF X 7/16 THICKRevington TR information: Nyloc Nut tall version. This Nyloc nut is used in locations where extra thread depth is desirable. |
1 | ||||
P80 | H81112 |
Bolt Engine mounting to gearbox extensionThis item has been superceded by SH608121 - see below |
1 | |||
SH608121 |
SCREW 1/2 UNF X 1-1/2" |
1 |
£1.69 Ex VAT @ 20% |
|||
P81 | HB1115 |
Bolt Engine mounting to gearbox extensionThis item has been superceded by BH608161 - see below |
1 | |||
BH608161 |
BOLT 1/2 UNF X 2" |
1 |
£3.55 Ex VAT @ 20% |
|||
P82 | HN2011 |
Nut Engine mounting to gearbox extensionThis item has been superceded by NP608141 - see below |
1 | |||
NP608141 |
NUT PLAIN 1/2 UNF X 7/16 THICK |
1 |
£0.47 Ex VAT @ 20% |
|||
P83 | WL0211 |
Washer, lock Engine mounting to gearbox extensionThis item has been superceded by WS108143133 - see below |
2 | |||
WS108143133 |
WASHER SPRING 1/2" RECT SECTION |
2 |
£0.16 Ex VAT @ 20% |
|||
P84 | HN2010 |
Nut Engine mounting to crossmemberThis item has been superceded by NP607121 - see below |
2 | |||
NP607121 |
NUT PLAIN 7/16UNF X 3/8" |
2 |
£0.26 Ex VAT @ 20% |
|||
P85 | WL0210 |
Washer, lock Engine mounting to crossmemberThis item has been superceded by WS107121203 - see below |
2 | |||
WS107121203 |
WASHER SPRING 7/16" RECT SECTION |
2 |
£0.42 Ex VAT @ 20% |
|||
P85A | WP0010 |
Washer, plain Engine mounting to crossmemberThis item has been superceded by WP10716056 - see below |
2 | |||
WP10716056 |
WASHER 7/16"x 1"x 0.56 |
2 |
£0.54 Ex VAT @ 20% |
|||
P86 | 112445 |
CLUTCH HOUSING COVERRevington TR information: No longer available new. Consider original second hand part number 112445SH. . |
1 | |||
PB7 | HU0808 |
Screw, set Securing cover to gearboxThis item has been superceded by SH605081 - see below |
2 | |||
SH605081 |
SCREW 5/16 UNF X 1 INCH |
2 |
£0.79 Ex VAT @ 20% |
|||
P87A | HU0810 |
Screw, set Securing cover to gearboxThis item has been superceded by SH605101 - see below |
2 | |||
SH605101 |
SCREW 5/16 UNF X 1-1/4 INCH |
2 |
£1.04 Ex VAT @ 20% |
|||
P88 | HN2008 |
Nut Securing cover to gearboxThis item has been superceded by NP605081 - see below |
4 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
4 |
£0.17 Ex VAT @ 20% |
|||
P89 | WL0208 |
Washer, lock Securing cover to gearboxThis item has been superceded by WS105090853 - see below |
4 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
4 |
£0.25 Ex VAT @ 20% |
Also in this listing
Gear lever grommet item P75A