Home » Suspension and steering

Suspension and steering

TR4A Plate S - FRONT SUSPENSION AND FRONT HUBS.

> Open plate

> Open plate in new window

> Print Plate

> Close plate

> Open plate in new window

> Print Plate

Plate No.	Part No.	Description and Comments	No Per Unit	Price	Add to Cart
S1AA	307503	FRONT SUSPENSION UNIT Bolt on Disc Wheels R.H.	1		No longer available
S1BB	307504	FRONT SUSPENSION UNIT Bolt on Disc Wheels L.H.	1		No longer available
S1CC	514241	FRONT SUSPENSION UNIT Centre Lock, Wire Wheels R.H.	1		No longer available
S1DD	514242	FRONT SUSPENSION UNIT Centre Lock, Wire Wheels L.H.	1		No longer available
		The above units comprise:-Upper Wishbone, Top Inner Fulcrum, Vertical Link, Stub Axle, Hub, Brake Unit, Tie Rod Lever, Bottom Trunnion, Lower Wish bone Arms and Lower Inner Fulcrum Brackets
S1	200659 CLICK FOR MORE INFO	UPPER FULCRUM PIN-INNER Revington TR information: We prefer not sell this part loose, as it is easy to fit the wrong way round. We sell 200659K, which includes a fitting instruction. Consider second hand part 200659SHK or second hand part powder coated... READ MORE	2	£50.26 Ex VAT @ 20% £41.88	Available to order
S2A	013599	Screw, set Top inner fulcrum pin to chassis frame	8		No longer available
S2B	WL0209 CLICK FOR MORE INFO	Washer, spring Top inner fulcrum pin to chassis frame This item has been superceded by WS106111243 - see below	8
	WS106111243	WASHER SPRING 3/8" RECT SECTION	8	£0.37 Ex VAT @ 20% £0.31
S2	133504 CLICK FOR MORE INFO	UPPER WISHBONE ARM ASSEMBLY - FRONT Revington TR information: Consider also second hand part 133504SH or second hand part powder coated 133504SHPC	2	£72.56 Ex VAT @ 20% £60.47
S3	133507 CLICK FOR MORE INFO	UPPER WISHBONE ARM ASSEMBLY- REAR Revington TR information: Consider also second hand part 133507SH or second hand part powder coated 133507SHPC	2	£72.56 Ex VAT @ 20% £60.47
S4	102228 CLICK FOR MORE INFO	Bush, rubber Wishbone to fulcrum pin Revington TR information: Upper inner front suspension wishbone bush, rubber TR2-6, also lower inner bush TR2-3. Our stock is genuine Leyland manufacture, the rubber is therefore significantly higher quality than aftermarket reproduction products. We offer a Superpro Polyurethane improved... READ MORE	8	£3.13 Ex VAT @ 20% £2.61
S5	WM0069 CLICK FOR MORE INFO	Washer, plain Wishbone to fulcrum pin This item has been superceded by WP10722110 - see below	4
	WP10722110	WASHER PLAIN 7/16 X 1-3/8 X .110	4	£1.76 Ex VAT @ 20% £1.47
S6	LN2210 CLICK FOR MORE INFO	Nut, slotted Wishbone to fulcrum pin This item has been superceded by NC607121 - see below	4
	NC607121	NUT CASTLE 7/16UNF x3/8"-11/16"AF	4	£2.09 Ex VAT @ 20% £1.74
S7	P00010 CLICK FOR MORE INFO	Pin, cotter Wishbone to fulcrum pin This item has been superceded by PS106071 - see below	4
	PS106071 CLICK FOR MORE INFO	PIN SPLIT 3/32" X 7/8"	4	£0.54 Ex VAT @ 20% £0.45
S8	142394 CLICK FOR MORE INFO	Ball joint assembly, upper wishbone This item has been superceded by GSJ131 - see below	2
	GSJ131 CLICK FOR MORE INFO	TOP BALL JOINT TR4-6 - High Articulation Revington TR information: High quality Top Ball Joint (TBJ) with maximum articulation. This part is a must for high performance cars, particularly TR2-4 with 3 degree caster and adjustable upper fulcrums fitted. The origin Stanpart/Leyland TBJ had 32 degrees... READ MORE	2	£90.92 Ex VAT @ 20% £75.77
S9	138509 CLICK FOR MORE INFO	Gaiter, between ball joint and vertical link	2	£9.89 Ex VAT @ 20% £8.24	Available to order
S10	138869 CLICK FOR MORE INFO	Clip, gaiter Revington TR information: This ring secures the gaiter on GSJ131 ball joint. As it is not available Revington TR recommend using lock wire. We can supply this by the meter RTR5285-16 or a full drum RTR5285-16M	2		No longer available
S11	501024 CLICK FOR MORE INFO	Nipple, grease, in top of ball joint This item has been superceded by RTR5080 - see below	2
	RTR5080	GREASE NIPPLE 1/4 UNF 45 DEGREE Revington TR information: 1/4" UNF 45º	2	£1.60 Ex VAT @ 20% £1.33
S12	112347 CLICK FOR MORE INFO	Bolt Ball joint assembly to upper wishbone arm assembly This item has been superceded by BH606211 - see below	4
	BH606211	BOLT 3/8 UNF X 2-5/8 INCH	4	£2.87 Ex VAT @ 20% £2.39
S13	YN2909 CLICK FOR MORE INFO	Nut, nyloc Ball joint assembly to upper wishbone arm assembly This item has been superceded by NY606151 - see below	4
	NY606151 CLICK FOR MORE INFO	NUT NYLOC 3/8UNF X 15/32 thick	4	£0.71 Ex VAT @ 20% £0.59
S14	WP0045 CLICK FOR MORE INFO	Washer, plain Ball joint assembly to upper wishbone arm assembly This item has been superceded by WP10612075 - see below	4
	WP10612075 CLICK FOR MORE INFO	WASHER PLAIN 3/8 X 3/4 TABLE3 Revington TR information: Washer Plain stands Table 3. in applications where a hardened washer is needed (rocker pedestal attachment for instance) us WP009	4	£0.42 Ex VAT @ 20% £0.35
S15	307215 CLICK FOR MORE INFO	VERTICAL LINK R.H. Revington TR information: Consider original second hand part number 307215SH. .	1	£191.36 Ex VAT @ 20% £159.47	Available to order
S16	307216 CLICK FOR MORE INFO	VERTICAL LINK L.H.	1	£191.36 Ex VAT @ 20% £159.47	Available to order
S17	YN2911 CLICK FOR MORE INFO	Nut, nyloc, thin Vertical link to ball joint This item has been superceded by NY608191 - see below	2
	NY608191	NYLOC 1/2 UNF X 19/32 INCH	2	£1.08 Ex VAT @ 20% £0.90
S17A	WP0011 CLICK FOR MORE INFO	Washer, plain Vertical link to ball joint This item has been superceded by WP10818093 - see below	2
	WP10818093	WASHER PLAIN 1/2 X 1-1/8 INCH OD	2	£0.58 Ex VAT @ 20% £0.48
S18	307211 CLICK FOR MORE INFO	Lever, tie rod R.H. Revington TR information: Consider original second hand part 307211SH, or original second hand part powder coated black 307211SHPC.	1		No longer available
S18A	307212 CLICK FOR MORE INFO	Lever, tie rod L.H. Revington TR information: Consider original second hand part 307212SH or original second hand part powder coated black 307212SHPC	1		No longer available
S18	133499 CLICK FOR MORE INFO	Plate, mounting, disc brake caliper R.H. Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133499SH or second hand part powder coated black 133499SHPC.	1		No longer available
S19	133500 CLICK FOR MORE INFO	Plate, mounting, disc brake caliper L.H. Revington TR information: Fitted from commission Number CT4690 (wire wheels), CT4388 (disc wheels) and future. Not currently available, use second hand part 133500SH or second hand part powder coated black 133500SHPC	1		No longer available
S20	118324 CLICK FOR MORE INFO	Bolt Mounting plates to vertical link	2	£4.58 Ex VAT @ 20% £3.82
521	113144 CLICK FOR MORE INFO	Bolt Mounting plates to vertical link This item has been superceded by SH606061 - see below	2
	SH606061	SCREW 3/8 UNF X 3/4 INCH	2	£1.08 Ex VAT @ 20% £0.90
S22	106641 CLICK FOR MORE INFO	Washer, tab Mounting plates to vertical link	4	£2.76 Ex VAT @ 20% £2.30
S23	YN2909 CLICK FOR MORE INFO	Nut, nyloc Mounting plates to vertical link This item has been superceded by NY606151 - see below	2
	NY606151 CLICK FOR MORE INFO	NUT NYLOC 3/8UNF X 15/32 thick	2	£0.71 Ex VAT @ 20% £0.59
S24	113143 CLICK FOR MORE INFO	Bolt Tie rod levers and mounting plates to vertical link This item has been superceded by BH606231 - see below	2
	BH606231	BOLT 3/8 UNF X 2-7/8 INCH Revington TR information: HT Steel Hex bolt	2	£2.51 Ex VAT @ 20% £2.09
S25	112032 CLICK FOR MORE INFO	Bolt Tie rod levers and mounting plates to vertical link This item has been superceded by BH606281 - see below	2
	BH606281	BOLT 3/8 UNF X 3-1/2 INCH	2	£2.14 Ex VAT @ 20% £1.78
S26	107106 CLICK FOR MORE INFO	Piece, distance Tie rod levers and mounting plates to vertical link Revington TR information: This spacer is 24 mm long. Consider also second hand part 107106SH or second hand part powder coated black 107106SHPC.	4	£4.25 Ex VAT @ 20% £3.54	Available to order
S27	YN2909 CLICK FOR MORE INFO	Nut, nyloc Tie rod levers and mounting plates to vertical link This item has been superceded by NY606151 - see below	4
	NY606151 CLICK FOR MORE INFO	NUT NYLOC 3/8UNF X 15/32 thick	4	£0.71 Ex VAT @ 20% £0.59
S27A	WP0045 CLICK FOR MORE INFO	Washer, plain Dust cover to vertical link This item has been superceded by WP10612075 - see below	2
	WP10612075 CLICK FOR MORE INFO	WASHER PLAIN 3/8 X 3/4 TABLE3 Revington TR information: Washer Plain stands Table 3. in applications where a hardened washer is needed (rocker pedestal attachment for instance) us WP009	2	£0.42 Ex VAT @ 20% £0.35
S27B	TN3209 CLICK FOR MORE INFO	Nut, nyloc Dust cover to vertical link This item has been superceded by NY606121 - see below	2
	NY606121 CLICK FOR MORE INFO	NUT NYLOC HALF 3/8UNF X 3/8" THIN Revington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE	2	£0.79 Ex VAT @ 20% £0.66
S28	115763 CLICK FOR MORE INFO	STUB AXLE	2	£36.31 Ex VAT @ 20% £30.26
S29	WP0011 CLICK FOR MORE INFO	Washer, plain Stub axle to vertical link This item has been superceded by WP10818093 - see below	2
	WP10818093	WASHER PLAIN 1/2 X 1-1/8 INCH OD	2	£0.58 Ex VAT @ 20% £0.48
S30	TN3211 CLICK FOR MORE INFO	Nut, thin, nyloc Stub axle to vertical link This item has been superceded by NY608151 - see below	2
	NY608151	NUT NYLOCK 1/2UNF X 15/32" deep Revington TR information: This nut is 0.468" tall and is to the correct spec. Other nuts of this number may not be to this specification.	2	£2.17 Ex VAT @ 20% £1.81
S31	107194 CLICK FOR MORE INFO	Seal, oil assembly This item has been superceded by GHS110 - see below	2
	GHS110 CLICK FOR MORE INFO	OIL SEAL FRONT HUB TR2-6 Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE	2	£4.49 Ex VAT @ 20% £3.74
S31A	100667 CLICK FOR MORE INFO	Seal, felt This item has been superceded by GHS110 - see below	1
	GHS110 CLICK FOR MORE INFO	OIL SEAL FRONT HUB TR2-6 Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE	1	£4.49 Ex VAT @ 20% £3.74
S31B	100868 CLICK FOR MORE INFO	Retainer, felt seal This item has been superceded by GHS110 - see below	1
	GHS110 CLICK FOR MORE INFO	OIL SEAL FRONT HUB TR2-6 Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE	1	£4.49 Ex VAT @ 20% £3.74
S32	100573 CLICK FOR MORE INFO	Bearing, inner, front hub This item has been superceded by GHB111 - see below	2
	GHB111 CLICK FOR MORE INFO	BEARING FR HUB TR2-6 INNER Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. see... READ MORE	2	£20.27 Ex VAT @ 20% £16.89
S33	114284 CLICK FOR MORE INFO	Hub Assembly, front Triumph Catalogue Remarks: For use with disc wheels only Revington TR information: TR3-6 (and TR2 when disc brakes have been fitted) Steel front hub. This hub, which weighs 2.262Kg, is not particularly good value when the aluminium equivalent is cheaper and lighter, order 114284AL. Second hand steel hubs,... READ MORE	2	£260.47 Ex VAT @ 20% £217.06	Available to order
S34	114282 CLICK FOR MORE INFO	Stud, wheel Triumph Catalogue Remarks: For use with disc wheels only Revington TR information: This wheel stud which is 32mm long (measured from under the head), presses into the hub and is used at the front of TR3 (Disc brake cars) throughout the range to TR6 fitted with steel wheels.... READ MORE	8	£6.53 Ex VAT @ 20% £5.44
S35	114283 CLICK FOR MORE INFO	Hub assembly, front Triumph Catalogue Remarks: For use with wire wheels only This item has been superceded by 114284 - see below	2
	114284 CLICK FOR MORE INFO	Hub Assembly, front Revington TR information: TR3-6 (and TR2 when disc brakes have been fitted) Steel front hub. This hub, which weighs 2.262Kg, is not particularly good value when the aluminium equivalent is cheaper and lighter, order 114284AL. Second hand steel hubs,... READ MORE	2	£260.47 Ex VAT @ 20% £217.06	Available to order
S36	114281 CLICK FOR MORE INFO	Stud, wheel Triumph Catalogue Remarks: For use with wire wheels only Revington TR information: This wheel stud which presses into the hub is used at the front of TR3 (Disc brake cars) throughout the range to TR6 fitted with wire wheels. Stud 114281 is specifically intended for the front only... READ MORE	8	£6.66 Ex VAT @ 20% £5.55
S36A	202446 CLICK FOR MORE INFO	Extension hub, R.H. Triumph Catalogue Remarks: For use with wire wheels only This item has been superceded by 217602 - see below	1
	217602 CLICK FOR MORE INFO	HUB ADAPTOR RH WIRE WHEEL Revington TR information: consider second hand parts 217602SH and 217603SH	1	£89.35 Ex VAT @ 20% £74.46
S37	202447 CLICK FOR MORE INFO	Extension hub, L.H. Triumph Catalogue Remarks: For use with wire wheels only This item has been superceded by 217603 - see below	1
	217603 CLICK FOR MORE INFO	HUB ADAPTOR LH WIRE WHEEL TR3-6 Revington TR information: consider second hand parts 217602SH and 217603SH	1	£89.35 Ex VAT @ 20% £74.46	Available to order
S38	110366 CLICK FOR MORE INFO	Nut, extension to hub Triumph Catalogue Remarks: For use with wire wheels only Revington TR information: Nut, wire wheels only TR2-TR6 attaching the adapter to the hub. Consider original second hand part number 110366SH. Steel wheel TR2-6 early (when covered by a wheel trim) use a larger nut 109586. Later TR6 with... READ MORE	8	£2.66 Ex VAT @ 20% £2.22
S39	100536 CLICK FOR MORE INFO	Bearing, outer This item has been superceded by GHB110 - see below	2
	GHB110 CLICK FOR MORE INFO	BEARING FR HUB TR2-6 OUTER Revington TR information: Should you require a complete wheel bearing kit for one hub comprising one each inner and outer bearing and the seal, please order GHK1021. Revington TR also offer an anti knock back kit. Order RTR3463K. See... READ MORE	2	£20.27 Ex VAT @ 20% £16.89
S40	102690 CLICK FOR MORE INFO	Washer, 'D' Front hub to stub axle	2	£5.09 Ex VAT @ 20% £4.24
S41	LN2211 CLICK FOR MORE INFO	Nut, slotted Front hub to stub axle Revington TR information: Some nuts are too thick and do not fit under the cap. We have sourced the correct height nut that fits correctly.	2	£4.38 Ex VAT @ 20% £3.65
S42	PCA020	Pin, cotter Front hub to stub axle	2		No longer available
S43	102689 CLICK FOR MORE INFO	Cap, grease retaining Revington TR information: Grease cap. consider second hand part 102689SH	2	£7.48 Ex VAT @ 20% £6.23
S43A	142377 CLICK FOR MORE INFO	BOTTOM TRUNNION ASSEMBLY R.H. Revington TR information: consider second hand part 142377SH For the trunnion seal kits see Superpro polyurethane kits below.		£112.52 Ex VAT @ 20% £93.77
S44	142378 CLICK FOR MORE INFO	BOTTOM TRUNNION ASSEMBLY R.H. Revington TR information: consider second hand part 142378SH For the trunnion seal kits see Superpro polyurethane kit below.		£112.52 Ex VAT @ 20% £93.77	Available to order
S45	142403 CLICK FOR MORE INFO	Stop, steering lock This item has been superceded by 156111 - see below	2
	156111 CLICK FOR MORE INFO	LOCKSTOP TR4A-6 Revington TR information: TR4A-6 Front Suspension lock stop. This stop is 20.56mm diameter, 14.2mm tall with an 8mm mounting hole. For wider wishbones and problems with trunnion bolts touching the discs, use Part Number 156111-22, a similar part 22mm... READ MORE	2	£6.96 Ex VAT @ 20% £5.80
S46	HU0811 CLICK FOR MORE INFO	Screw, set Stop to trunnion This item has been superceded by SH605111 - see below	2
	SH605111	SCREW 5/16 UNF X 1-3/8 INCH	2	£2.46 Ex VAT @ 20% £2.05
S47	WL0222 CLICK FOR MORE INFO	Washer, lock Stop to trunnion This item has been superceded by WS105090853 - see below	2
	WS105090853	WASHER SPRING 5/16" ID RECT SECTION	2	£0.25 Ex VAT @ 20% £0.21
S48	056934 CLICK FOR MORE INFO	Nipple, grease	2	£2.41 Ex VAT @ 20% £2.01
S49	142402 CLICK FOR MORE INFO	Seal, oil, between trunnion and vertical link Revington TR information: Use the Superpro polyurethane version SPF2253K for longer life.	2	£11.57 Ex VAT @ 20% £9.64	Available to order
S50	307210 CLICK FOR MORE INFO	LOWER WISHBONE ARM ASSEMBLY-FRONT R.H. and REAR LH. Revington TR information: Consider also second hand part 307210SH or second hand part powder coated 307210SHPC	2	£111.76 Ex VAT @ 20% £93.13
S51	307209 CLICK FOR MORE INFO	LOWER WISHBONE ARM ASSEMBLY-FRONT L H. and REAR R. H. Revington TR information: TR4A-6 Lower Wishbone, left hand front and right hand back. Original part Leyland packaged. Consider also second hand part 307209SH or second hand part powder coated 307209SHPC	2	£108.49 Ex VAT @ 20% £90.41
S52	139835 CLICK FOR MORE INFO	Bolt, pivot Lower trunnion to lower wishbone	2	£9.80 Ex VAT @ 20% £8.17
S53	139832 CLICK FOR MORE INFO	Piece, distance Lower trunnion to lower wishbone Revington TR information: Our stock of this sleeve is genuine British Leyland or stainless steel part 139832SS. Consider also trunnion bush kit FSK6TK, two required per car	4	£10.55 Ex VAT @ 20% £8.79
S54	139833 CLICK FOR MORE INFO	Bearing, nylon Lower trunnion to lower wishbone Revington TR information: This nylon bush is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too.	8	£5.36 Ex VAT @ 20% £4.47
S55	142388 CLICK FOR MORE INFO	Washer, backing Lower trunnion to lower wishbone Revington TR information: This washer is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved kit SPF1844K Full kits for the front suspension are available too.... READ MORE	8	£2.66 Ex VAT @ 20% £2.22
S56	142387 CLICK FOR MORE INFO	Ring, sealing Lower trunnion to lower wishbone Revington TR information: This ring is available separately under this part number or in trunnion bush kit FSK6TUK. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available too.	8	£3.12 Ex VAT @ 20% £2.60
S57	139834 CLICK FOR MORE INFO	Shield, water Lower trunnion to lower wishbone Revington TR information: This shield is available separately under this part number or in trunnion bush kit FSK6TUK. Our stock is genuine Leyland. Superpro Polyurethane offer an improved bush kit SPF1844K Full kits for the front suspension are available... READ MORE	8	£2.27 Ex VAT @ 20% £1.89
S58	LN2212 CLICK FOR MORE INFO	Nut Lower trunnion to lower wishbone This item has been superceded by NC609151 - see below	2
	NC609151	NUT CASTLE 9/16UNF x 15/32"- 7/8"AF	2	£4.39 Ex VAT @ 20% £3.66
S59	P00012 CLICK FOR MORE INFO	Pin, cotter Lower trunnion to lower wishbone This item has been superceded by PS108091 - see below	2
	PS108091	PIN SPLIT 1/8 X 1-1/8	2	£0.26 Ex VAT @ 20% £0.22	Available to order
S60	139715 CLICK FOR MORE INFO	Bracket assembly, lower fulcrum, inner This item has been superceded by 148691 - see below	4
	148691 CLICK FOR MORE INFO	BRACKET LWR FR SUSP TR4A-6 Revington TR information: TR4A-6 Bracket Front Suspension lower fulcrum. This part has two attachment bolts. Some aftermarket new parts are dimensionaly inaccurate. Use our powder-coated original parts, second hand parts or uprated part RTR3287. We have been... READ MORE	4	£31.50 Ex VAT @ 20% £26.25	Available to order
S61	141481 CLICK FOR MORE INFO	Bush Lower wishbone to mounting bracket Revington TR information: Superpro Polyurethane kit SPF0288K offers a much improved ride and considerably longer life. We also have 141481UK, which is a Nylatron kit	4	£2.78 Ex VAT @ 20% £2.32	Available to order
S62	HB1121 CLICK FOR MORE INFO	Bolt Lower wishbone to mounting bracket This item has been superceded by BH608221 - see below	4
	BH608221	BOLT 1/2 UNF X 2-3/4 INCH	4	£2.80 Ex VAT @ 20% £2.33
S63	YN2911 CLICK FOR MORE INFO	Nut, nylon Lower wishbone to mounting bracket This item has been superceded by NY608191 - see below	4
	NY608191	NYLOC 1/2 UNF X 19/32 INCH	4	£1.08 Ex VAT @ 20% £0.90
S64	139727 CLICK FOR MORE INFO	Shim Bracket to chassis frame Revington TR information: Shim adjusting, steel, front suspension TR4A-6. Revington suggest as an alternative, you use second hand part 139727SH or stainless steel part 139727SH .	as req'd.	£6.16 Ex VAT @ 20% £5.13
S65	YN2909 CLICK FOR MORE INFO	Nut, nyloc Bracket to chassis frame This item has been superceded by NY606151 - see below	4
	NY606151 CLICK FOR MORE INFO	NUT NYLOC 3/8UNF X 15/32 thick	4	£0.71 Ex VAT @ 20% £0.59
S66	WM0059 CLICK FOR MORE INFO	Washer, plain Bracket to chassis frame This item has been superceded by WP10614075 - see below	4
	WP10614075	WASHER PLAIN 3/8 ID X 7/8 OD X 0.075" TAB4	4	£0.38 Ex VAT @ 20% £0.32
S67	140951 CLICK FOR MORE INFO	LOWER SPRING PAN ASSEMBLY Revington TR information: This part is no longer available new. Please order second hand part 140951SH or powder coated second hand part 140951SHPC	2		No longer available
S67A	101961 CLICK FOR MORE INFO	Screw, retaining rebound abutment bracket This item has been superceded by BH606181 - see below	8
	BH606181	BOLT 3/8 UNF X 2-1/4 INCH	8	£0.56 Ex VAT @ 20% £0.47
S68	HB0916 CLICK FOR MORE INFO	Bolt Spring pan assembly to lower wishbone This item has been superceded by BH606161 - see below	8
	BH606161	BOLT 3/8 UNF X 2 INCH	8	£0.89 Ex VAT @ 20% £0.74
S69	143712 CLICK FOR MORE INFO	Stud Spring pan assembly to lower wishbone This item has been superceded by ST606121 - see below	8
	ST606121	STUD 3/8 X 1-1/2" UNF+ UNF	8	£2.09 Ex VAT @ 20% £1.74
S70	YN2909 CLICK FOR MORE INFO	Nut, nyloc Spring pan assembly to lower wishbone This item has been superceded by NY606151 - see below	12
	NY606151 CLICK FOR MORE INFO	NUT NYLOC 3/8UNF X 15/32 thick	12	£0.71 Ex VAT @ 20% £0.59
S71	WP0020 CLICK FOR MORE INFO	Washer, plain Spring pan assembly to lower wishbone This item has been superceded by WP10610057 - see below	12
	WP10610057	WASHER PLAIN 3/8 X 5/8 X 0.057"	12	£0.65 Ex VAT @ 20% £0.54
S72	211648 CLICK FOR MORE INFO	FRONT ROAD SPRING (Coil) 'Short' This item has been superceded by 213165PR - see below	2
	213165PR CLICK FOR MORE INFO	SPRING PAIR TR4A-6 FRONT STANDARD Revington TR information: This is a standard spring, supplied in pairs. When fitted to a standard weight TR4A with wheels fitted which have a 300mm rolling radius, the ground clearance will be 170mm. A TR4A with 21316PR springs... READ MORE	2	£95.22 Ex VAT @ 20% £79.35	Available to order
S72A	144910 CLICK FOR MORE INFO	Piece, packing, on top of front road spring Triumph Catalogue Remarks: Fitted from Comm. No. CTC59836 to Comm. No - Note:-Packing piece 144910 to be used with road spring 211648 only. Front road spring 213165 may be used for all replacements.	2		No longer available
S72B	213165 CLICK FOR MORE INFO	FRONT ROAD SPRING (Coil) 'Long' Triumph Catalogue Remarks: Fitted from Comm. No - and future This item has been superceded by 213165PR - see below	2
	213165PR CLICK FOR MORE INFO	SPRING PAIR TR4A-6 FRONT STANDARD Revington TR information: This is a standard spring, supplied in pairs. When fitted to a standard weight TR4A with wheels fitted which have a 300mm rolling radius, the ground clearance will be 170mm. A TR4A with 21316PR springs... READ MORE	2	£95.22 Ex VAT @ 20% £79.35	Available to order
S73	100751 CLICK FOR MORE INFO	Washer, rubber, both ends of spring Revington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. .	4	£2.76 Ex VAT @ 20% £2.30	Available to order
S74	107682 CLICK FOR MORE INFO	Piece, packing, between spring and abutment Revington TR information: Consider second hand part 107682SH	2	£37.37 Ex VAT @ 20% £31.14	Available to order
S75	100751 CLICK FOR MORE INFO	Washer, rubber, over packing piece Revington TR information: Revington TR recommends using the superior Superpro Polyurethane product SPF1028K. A thicker version SPF1028-5K is available too to enable corner height adjustments to be made. We also have second hand parts 100751SH. .	2	£2.76 Ex VAT @ 20% £2.30	Available to order

S76	139703 CLICK FOR MORE INFO	FRONT SHOCK ABSORBER This item has been superceded by GSA272 - see below
	GSA272 CLICK FOR MORE INFO	DAMPER FRONT TR4A-6 each Revington TR information: Standard front damper TR4A-6. Please call for more information on this damper before ordering. Consider second hand dampers, we have a stock of good used parts GSA272SH Uprated version is RTR3008		£23.77 Ex VAT @ 20% £19.81
S76A	143355 CLICK FOR MORE INFO	FRONT SHOCK ABSORBER-ADJUSTABLE Triumph Catalogue Remarks: Special orders only Revington TR information: TR4A-6 Front suspension Damper adjustable. This Armstrong damper offered by Triumph is no longer available. RevingtonTR offer RTR3251-1K and RTR3251-2K as suitable alternatives.	2		No longer available
S77	119450 CLICK FOR MORE INFO	Rubber, mounting Lower Revington TR information: Superpro Polyurethane offer an improved kit whic lasts much longer than rubber. Please see SPF0476K below	2		No longer available
S78	142444 CLICK FOR MORE INFO	Rubber, mounting Upper This item has been superceded by 21A860 - see below	4
	21A860 CLICK FOR MORE INFO	TOP S/ABS BUSH Revington TR information: Superpro Polyurethane offer an improved kit please see SPF0809K	4	£3.56 Ex VAT @ 20% £2.97
S79	140416 CLICK FOR MORE INFO	Washer Shock absorber upper attachment Revington TR information: Flat washer 7/16" internal diameter, 1-5/8" external diameter, 0.164" thick Can use stainless steel washer WP107261572 or cupped washer TBC	2	£1.55 Ex VAT @ 20% £1.29
S80	140479 CLICK FOR MORE INFO	Washer Shock absorber upper attachment This item has been superceded by WP10626164 - see below	2
	WP10626164	WASHER PLAIN 3/8 X 1-5/8 X .164	2	£1.38 Ex VAT @ 20% £1.15	Available to order
S81	HN2009 CLICK FOR MORE INFO	Nut Shock absorber upper attachment This item has been superceded by NP606111 - see below	2
	NP606111	NUT PLAIN 3/8 UNF X 11/32" (STD)	2	£0.14 Ex VAT @ 20% £0.12
S82	JN2109 CLICK FOR MORE INFO	Nut, jam Shock absorber upper attachment This item has been superceded by NP606071 - see below	2
	NP606071	NUT PLAIN 3/8 UNF X 7/32"	2	£0.56 Ex VAT @ 20% £0.47
S83	106843 CLICK FOR MORE INFO	Bracket, shock absorber Revington TR information: Lower damper support plain (without tube) fitted to TR2-6. Consider second hand part 106843SH or second hand part powder coated black 106843SHPC. TR2-4 utilise a cover bracket 106844 below this part to act on the rebound... READ MORE	4	£12.80 Ex VAT @ 20% £10.67
S84	HB1019 CLICK FOR MORE INFO	Bolt Shock absorber to Fulcrum brackets This item has been superceded by BH607191 - see below	2
	BH607191	BOLT 7/16UNF x 2-3/8"	2	£2.66 Ex VAT @ 20% £2.22
S85	JN3210	Nut, nyloc Shock absorber to Fulcrum brackets	2		No longer available
S86	HN2009 CLICK FOR MORE INFO	Nut Fulcrum brackets to spring pan This item has been superceded by NP606111 - see below	8
	NP606111	NUT PLAIN 3/8 UNF X 11/32" (STD)	8	£0.14 Ex VAT @ 20% £0.12
S87	WL0209 CLICK FOR MORE INFO	Washer, lock Fulcrum brackets to spring pan This item has been superceded by WS106111243 - see below	8
	WS106111243	WASHER SPRING 3/8" RECT SECTION	8	£0.37 Ex VAT @ 20% £0.31

Suspension and steering

TR4A Plate S - FRONT SUSPENSION AND FRONT HUBS.

307503

FRONT SUSPENSION UNIT Bolt on Disc Wheels R.H.

307504

FRONT SUSPENSION UNIT Bolt on Disc Wheels L.H.

514241

FRONT SUSPENSION UNIT Centre Lock, Wire Wheels R.H.

514242

FRONT SUSPENSION UNIT Centre Lock, Wire Wheels L.H.

The above units comprise:-Upper Wishbone, Top Inner Fulcrum, Vertical Link, Stub Axle, Hub, Brake Unit, Tie Rod Lever, Bottom Trunnion, Lower Wish bone Arms and Lower Inner Fulcrum Brackets

200659

013599

Screw, set Top inner fulcrum pin to chassis frame

WL0209

Washer, spring Top inner fulcrum pin to chassis frame

WS106111243

133504

133507

102228

WM0069

Washer, plain Wishbone to fulcrum pin

WP10722110

LN2210

Nut, slotted Wishbone to fulcrum pin

NC607121

P00010

Pin, cotter Wishbone to fulcrum pin

PS106071

142394

Ball joint assembly, upper wishbone

GSJ131

138509

138869

501024

Nipple, grease, in top of ball joint

RTR5080

112347

Bolt Ball joint assembly to upper wishbone arm assembly

BH606211

YN2909

Nut, nyloc Ball joint assembly to upper wishbone arm assembly

NY606151

WP0045

Washer, plain Ball joint assembly to upper wishbone arm assembly

WP10612075

307215

307216

YN2911

Nut, nyloc, thin Vertical link to ball joint

NY608191

WP0011

Washer, plain Vertical link to ball joint

WP10818093

307211

307212

133499

133500

118324

113144

Bolt Mounting plates to vertical link

SH606061

106641

YN2909

Nut, nyloc Mounting plates to vertical link

NY606151

113143

Bolt Tie rod levers and mounting plates to vertical link

BH606231

112032

Bolt Tie rod levers and mounting plates to vertical link

BH606281

107106

YN2909

Nut, nyloc Tie rod levers and mounting plates to vertical link

NY606151

WP0045

Washer, plain Dust cover to vertical link

WP10612075

TN3209