Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate T - INDEPENDENT REAR AXLE: DIFFERENTIAL UNIT, REAR AXLE SHAFTS AND HUB UNITS.
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
T1AA | 514608 |
REAR AXLE CENTRE ASSEMBLY-3.7 to 1 ratioRevington TR information: New differential centre ssections are not available new. We do however have second hand parts available from time to time and offer this part on an exchange basis under the originnal service exhange number 514752. See... READ MORE |
1 | |||
T1BB | 514752 |
REAR AXLE CENTRE ASSEMBLY-(3.7 to 1 ratio) Reconditioned UnitRevington TR information: TR4A 3.7:1 IRS axle Reconditioned using second hand crown wheel and pinion. |
1 |
£1169.23 Ex VAT @ 20% |
||
T1CC | 514609 |
REAR AXLE CENTRE ASSEMBLY-4.1 to 1 ratio |
1 | |||
T1DD | 514753 |
REAR AXLE CENTRE ASSEMBLY-(4.1 to 1 ratio) Reconditioned UnitRevington TR information: TR4A 4.1:1 IRS axle |
1 | |||
T1 | 141360 |
Cover assembly-rearRevington TR information: not available new. Use 141360SH |
1 | |||
T2 | 143472 |
Stud, mounting bracketThis item has been superceded by ST606121 - see below |
4 | |||
ST606121 |
STUD 3/8 X 1-1/2" UNF+ UNF |
4 |
£2.09 Ex VAT @ 20% |
|||
T3 | 013599 |
Plug, core, breather hole |
1 | |||
T4 | 510408 |
Pin, cotter, breatherThis item has been superceded by PS106121 - see below |
1 | |||
PS106121 |
SPLIT PIN 3/32 X 1-1/2 INCH |
1 |
£0.26 Ex VAT @ 20% |
|||
15 | 212047 |
Bracket, axle mounting, rearRevington TR information: Not available new, use second hand part 212047SH. |
1 | |||
T6 | YN2909 |
Nut, mounting bracket to rear coverThis item has been superceded by NY606151 - see below |
4 | |||
NY606151 |
NUT NYLOC 3/8UNF X 15/32 thick |
4 |
£0.71 Ex VAT @ 20% |
|||
T7 | 211793 |
Plate, axle mounting, frontRevington TR information: Consider second hand part 211793SH or reinforced second hand part 211793EX. |
1 |
£327.08 Ex VAT @ 20% |
||
T8 | 132856 |
Bolt Mounting plate to hypoid housing |
4 |
£10.80 Ex VAT @ 20% |
||
T9 | WN0710 |
Washer, shakeproof Mounting plate to hypoid housingThis item has been superceded by WS107120301 - see below |
4 | |||
WS107120301 |
WASHER 7/16" STAR INT |
4 |
£0.19 Ex VAT @ 20% |
|||
T10 | 305815 |
Housing assembly, hypoid |
1 | |||
T11 | 140419 |
Dowel, locating rear coversThis item has been superceded by DP508 - see below |
2 | |||
DP508 |
DOWEL |
2 |
£2.18 Ex VAT @ 20% |
|||
Not serviced |
Cap, Bearing |
|||||
T12 | 100878 |
Screw, set Bearing caps to hypoid housing |
4 | |||
T13 | WL0209 |
Washer, lock Bearing caps to hypoid housingThis item has been superceded by WS106111243 - see below |
4 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
|||
T14 | 114774 |
Plug, oil levelRevington TR information: The original square headed taper plug 114774 is used as an axle filler, drain plug and as a blank in the cooling system when a heater is not fitted. Revington TR recommend using a magnetic drain... READ MORE |
1 |
£5.87 Ex VAT @ 20% |
||
T15 | 302155 |
Case, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | |||
T16 | 110515 |
Bearing, differential casing to hypoid housing |
2 |
£62.52 Ex VAT @ 20% |
||
T16A | 100894 |
Shim, adjusting differential bearing .003 |
£3.11 Ex VAT @ 20% |
|||
T17 | 100895 |
Shim, adjusting differential bearing .005This item has been superceded by 100895/5 - see below |
as req'd. | |||
100895/5 |
SHIM-DIFF PINION 0.005 |
as req'd. |
£4.08 Ex VAT @ 20% |
|||
T17A | 100896 |
Shim, adjusting differential bearing .010This item has been superceded by 100896/10 - see below |
||||
100896/10 |
SHIM-DIFF PINION 0.010 |
£1.39 Ex VAT @ 20% |
||||
T18 | 502127 |
Crown wheel and assembly 3.7 to 1 ratioRevington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1pr |
£529.28 Ex VAT @ 20% |
||
T18A | 505014 |
Crown wheel and assembly 4.1 to 1 ratioRevington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
£403.88 Ex VAT @ 20% |
|||
T19 | 110737 |
Bolt Crown wheel to differential case. |
10 |
£2.12 Ex VAT @ 20% |
||
T20 | 118977 |
Washer, lock Crown wheel to differential case.This item has been superceded by WS106111243 - see below |
10 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
10 |
£0.37 Ex VAT @ 20% |
|||
T21 | 113187 |
Gear, side, differential-16 teethThis item has been superceded by 153384 - see below |
2 | |||
153384 |
SIDE GEAR DIFF TR3G-6 16 TEETHRevington TR information: This part is not available new, please consider second hand part number 153384SH or complete differential carrier assemblies 302155X and 302155XSH |
2 |
£124.64 Ex VAT @ 20% |
|||
T22 | 102801 |
Washer, thrust, differential side gear |
2 |
£4.22 Ex VAT @ 20% |
||
T23 | 113188 |
Pinion, differential-10 teethThis item has been superceded by 153385 - see below |
2 | |||
153385 |
GEAR DIFF PLANET TR3-6Revington TR information: 10 tooth pinion gear 15.5mm thick. This part is not available new, please consider second hand part number 153385SH or complete differential carrier assemblies 302155X and 302155XSH. . All TR s from Girling TR3-TR6 use... READ MORE |
2 |
£113.32 Ex VAT @ 20% |
|||
T23A | 056793 |
Washer, thrust, differential pinion .0465This item has been superceded by 139951 - see below |
||||
139951 |
Washer, thrust, differential pinion .057Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
||||
T23B | 139951 |
Washer, thrust, differential pinion .057Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|||
T23C | 139952 |
Washer, thrust, differential pinion .061Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£8.70 Ex VAT @ 20% |
|||
T24A | 139954 |
Washer, thrust, differential pinion .069Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£15.88 Ex VAT @ 20% |
|||
T24B | 139955 |
Washer, thrust, differential pinion .073Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
T24C | 139956 |
Washer, thrust, differential pinion .077Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
|||
T25 | 100844 |
Pin, cross, differential |
1 |
£43.52 Ex VAT @ 20% |
||
T26 | 111215 |
Pin, locating cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
||
T27 | 100897 |
Bearing, roller, pinion headThis item has been superceded by 100897A - see below |
1 | |||
100897A |
DIFF BEARING PIN BIG TR2-4Revington TR information: The outer diameter is 72.6mm The bore size is 31.72mm Overall height 30.4mm |
1 |
£46.30 Ex VAT @ 20% |
|||
T27A | 100965 |
Shim, adjusting pinion head bearing .003This item has been superceded by 100965/3 - see below |
||||
100965/3 |
SHIM PINION BEARING .003 |
|||||
T28 | 100966 |
Shim, adjusting pinion head bearing .005This item has been superceded by 1009665 - see below |
as req'd. | |||
1009665 |
SHIM BRG 0.005 |
as req'd. |
£1.73 Ex VAT @ 20% |
|||
T28A | 100967 |
Shim, adjusting pinion head bearing .010 |
£1.72 Ex VAT @ 20% |
|||
T29 | 100846 |
Spacer, between bearings |
1 |
£19.32 Ex VAT @ 20% |
||
T30 | 100422 |
Bearing, roller, pinion shank |
1 | |||
T31 | 100562 |
Shim, adjusting pinion shank bearing .003Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375"... READ MORE |
£2.14 Ex VAT @ 20% |
|||
T31A | 100563 |
Shim, adjusting pinion shank bearing .005"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
as reqd. |
£2.86 Ex VAT @ 20% |
||
T31B | 100564 |
Shim, adjusting pinion shank bearing .010"Revington TR information: Outer pinion shim Two outer axle pinion shim part numbers are similar in size but not quite the same. 100562 (0.003" thick) 100563 (0.005" thick) and 100564 (0.010" thick) are 1.10" internal diameter and 1.375" external diameter. 140793... READ MORE |
£1.84 Ex VAT @ 20% |
|||
T32 | 140337 |
Seal, oil, pinionRevington TR information: TR4A-6. Independent axle nose seal. Not shown in late TR6 parts book. The Original Triumph TR4A parts catalogue does not list the Axle Pinion Seal correctly in so far as seal 140337 is listed for both... READ MORE |
1 |
£12.88 Ex VAT @ 20% |
||
T33 | 138105 |
Flange, pinionRevington TR information: Round Differential input flange, TR4A (both Live axle and IRS) to TR6 CP52867/CC61570. Consider original second hand part 138105SH. |
1 |
£84.07 Ex VAT @ 20% |
||
T34 | 013599 |
Washer Flange to pinion |
1 | |||
T35 | 112635 |
Nut, slotted Flange to pinionThis item has been superceded by NY610163 - see below |
1 | |||
NY610163 |
NUT NYLOC 5/8UNF x ½" TALL 1-1/8" AFRevington TR information: Nyloc Nut 5/8" UNF, ½" tall and 1-1/8" AF, grey protective coating. This is a special heavy duty nut which is actually Leyland original part number 159394 (TR7 4 speed axle). Our stock is original Leyland... READ MORE |
1 | ||||
T36 | RTR5285-2 |
Wire, soft iron, 14G x 4Triumph Catalogue Remarks: or split pin PC0045 |
as reqd. |
£37.79 Ex VAT @ 20% |
||
T37 | 134480 |
Washer, Joint Hypoid housing to cover |
1 |
£2.23 Ex VAT @ 20% |
||
T38 | HU0808 |
Screw, set Hypoid housing to coverThis item has been superceded by SH605081 - see below |
8 | |||
SH605081 |
SCREW 5/16 UNF X 1 INCH |
8 |
£0.79 Ex VAT @ 20% |
|||
T39 | WL0208 |
Washer, lock Hypoid housing to coverThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
T40 | 134235 |
Rubber, mounting, upper and lower rearRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
4 |
£4.75 Ex VAT @ 20% |
||
T41 | 134235 |
Rubber, mounting, upper frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£4.75 Ex VAT @ 20% |
||
T42 | 134236 |
Rubber, mounting, lower frontRevington TR information: These bushes are very soft and can allow too much axle movement. We recommend using the following Superpro polyurethane bush kits: - SPF0138AVK TR4A IRS: Road use. SPF0138AK TR4A IRS: Fast Road and Rally use. SPF0138A-90K... READ MORE |
2 |
£3.48 Ex VAT @ 20% |
||
T43 | 134234 |
Washer, special Mounting bracket and plate to chassis frameThis item has been superceded by WP106381571 - see below |
4 | |||
WP106381571 |
WASHER DIFF MOUNT 3/8" X 2-3/8" X 0.157"Revington TR information: Revington TR recommend using Stainless Steel Washer WP106381572 |
4 |
£3.46 Ex VAT @ 20% |
|||
T44 | TN3209 |
Nut, nyloc Mounting bracket and plate to chassis frameThis item has been superceded by NY606121 - see below |
4 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
4 |
£1.44 Ex VAT @ 20% |
|||
T45 | 134441 |
INNER AXLE SHAFT R.H.This item has been superceded by 149379 - see below |
1 | |||
149379 |
AXLE SHAFT RH TR4A-6Revington TR information: RH Axle Shaft for TR4A-6 differentials. This is the short shaft 157mm long including the thread. Not available new. Use second hand part 149379SH. |
1 | ||||
T46 | 134440 |
INNER AXLE SHAFT L.H.This item has been superceded by 149378 - see below |
1 | |||
149378 |
AXLE SHAFT LHRevington TR information: LH Axle Shaft for TR4A-6 differentials. This is the long shaft, 178mm long including the thread. Whilst we have new parts available we also keep second hand part 149378SH. |
1 | ||||
T47 | 134465 |
Bearing, ball, axle shaft |
2 |
£26.95 Ex VAT @ 20% |
||
T48 | 128638 |
Housing, bearing retaining |
2 |
£26.92 Ex VAT @ 20% |
||
T49 | HU0806 |
Screw, set Bearing housing to hypoid housingThis item has been superceded by SH605061 - see below |
8 | |||
SH605061 |
SCREW 5/16 UNF X 3/4 INCH |
8 |
£0.54 Ex VAT @ 20% |
|||
T50 | WL0208 |
Washer, lock Bearing housing to hypoid housingThis item has been superceded by WS105090853 - see below |
8 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
8 |
£0.25 Ex VAT @ 20% |
|||
T51 | 138523 |
Seal, oil, fitted in bearing housing |
2 |
£6.49 Ex VAT @ 20% |
||
T52 | 138726 |
Flange, driving, assembly, innerRevington TR information: Drive Flange differential TR4A. This drive flange is not available new, we can however supply second hand parts where needed. Be aware that this part is not the same as the later flange 149409 as the... READ MORE |
2 | |||
T53 | 136842 |
Key Inner driving flange to inner axle shaft |
2 |
£4.38 Ex VAT @ 20% |
||
T54 | 139043 |
Washer, plain Inner driving flange to inner axle shaftThis item has been superceded by WP11020164 - see below |
2 | |||
WP11020164 |
WASHER PLAIN 5/8" x 1-1/4" x 0.164"Revington TR information: WASHER PLAIN 5/8" X 1-1/4" X 0.164" Commonly used for TR4A-6 Differential Pinion attachment. Our stock is original Leyland part number 142333 |
2 |
£7.94 Ex VAT @ 20% |
|||
T55 | 138563 |
Nut, nyloc Inner driving flange to inner axle shaftThis item has been superceded by NY610243 - see below |
2 | |||
NY610243 |
NUT NYLOC 5/8UNF x ¾" TALL 1-1/8" AFRevington TR information: Nut 5/8" UNF ¾" tall and 1-1/8" AF. This nut is horrendously expensive; it was originally part number 138563 used on TR4A-6 differential Axle Shafts. See 'MORE' for a list of other special duty nuts for... READ MORE |
2 |
£21.72 Ex VAT @ 20% |
|||
T55A | 402347 |
REAR OUTER AXLE SHAFT AND HUB ASSEMBLY (Comprising items T56 to T83 inclusive)This item has been superceded by 137496NEW - see below |
2 | |||
137496NEW |
REAR HUB ASSY. TR4A-6 NEWRevington TR information: TR4A-6 new-build standard rear Hub assembly. This unit is not currently available, consider rebuilt original part 137496EX or uprated version 137496-1. Whist the standard hub unit to the standard specification is not available, we... READ MORE |
2 |
£303.92 Ex VAT @ 20% |
|||
T55B | 212293 |
OUTER AXLE SHAFT ASSEMBLYRevington TR information: Triumph sold the TR4A drive shafts as a complete assembly including all parts from the hub to the flange connected to the differential unit. Today we sell the drive shafts separately from the hub. See Drive... READ MORE |
2 | |||
T56 | 211137 |
Flange, yokeRevington TR information: TR4A-6 drive flange for standard drive shafts. |
2 |
£110.80 Ex VAT @ 20% |
||
T57 | Not serviced |
Joint, slip, assembly |
||||
T58 | 134778 |
Joint, universalThis item has been superceded by GUJ116HD - see below |
4 | |||
GUJ116HD |
UNIVERSAL JOINT HEAVY DUTY TR2/6Revington TR information: Heavy duty greasable Universal Joint (UJ) which is a direct replacement for the standard TR2-6 UJ. This UJ has stronger, larger diameter and longer rollers, the caps are longer on inboard end to accommodate the longer... READ MORE |
4 |
£48.19 Ex VAT @ 20% |
|||
T59 | Not serviced |
Shaft, sliding half |
||||
T59A | 140750 |
End cups Fitted to outer axle shaft yoke assembly |
2 | |||
T59B | 140751 |
Washer, steel Fitted to outer axle shaft yoke assembly |
2 | |||
T59C | 140752 |
Washer, cork Fitted to outer axle shaft yoke assembly |
2 | |||
T60 | 140753 |
Boot, rubber |
2 |
£9.12 Ex VAT @ 20% |
||
T61 | 140606 |
Clip, gaiter, largeThis item has been superceded by EAW4321 - see below |
2 | |||
EAW4321 |
WIRE TIE |
2 |
£0.58 Ex VAT @ 20% |
|||
T62 | 140607 |
Clip, gaiter, small |
2 | |||
T63 | 137478 |
Shaft, axle outerThis item has been superceded by UKC643 - see below |
2 | |||
UKC643 |
SHAFT AXLE OUTER TR4A-6 |
2 |
£165.24 Ex VAT @ 20% |
|||
T64 | 107960 |
Bolt, Outer Axle shaft assembly to inner driving flangeRevington TR information: This bolt is used for other applications but primarily the propshaft. Also used in the axle. |
8 |
£4.25 Ex VAT @ 20% |
||
T65 | TN3209 |
Nut, nyloc Outer Axle shaft assembly to inner driving flangeThis item has been superceded by NY606121 - see below |
8 | |||
NY606121 |
NUT NYLOC HALF 3/8UNF X 3/8" THINRevington TR information: For propshaft and driveshaft applications or where heat might be an issue for nyloc nuts we recommend a stiff nut which is all metal and has a deformed thread to lock it in place. This nut... READ MORE |
8 |
£1.44 Ex VAT @ 20% |
|||
T66 | 137496 |
REAR HUB HOUSINGRevington TR information: This part is a bare hub bearing housing only. Consider also second hand part 137496SH. If you are looking for a complete hub assembly with the flange and central shaft with the universal joint yoke, these... READ MORE |
2 |
£204.70 Ex VAT @ 20% |
||
T67 | HN2008 |
Nut Securing hub housing and brake block plate to trailing armThis item has been superceded by NP605081 - see below |
12 | |||
NP605081 |
NUT PLAIN 5/16 UNF |
12 |
£0.17 Ex VAT @ 20% |
|||
T68 | WN0708 |
Washer, shakeproof Securing hub housing and brake block plate to trailing armThis item has been superceded by WS106111243 - see below |
12 | |||
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
12 |
£0.37 Ex VAT @ 20% |
|||
T69 | 138089 |
Seal, oil, innerThis item has been superceded by GHS131 - see below |
2 | |||
GHS131 |
SEAL INNER REAR HUB TR6 small |
2 |
£5.62 Ex VAT @ 20% |
|||
T70 | 132066 |
Bearing, innerThis item has been superceded by GHB101 - see below |
2 | |||
GHB101 |
BEARING REAR HUB TR4A/6Revington TR information: Also fits GT6 and Dolomite inner front hub |
2 |
£19.01 Ex VAT @ 20% |
|||
T71 | 138272 |
Spacer, collapsible, bearings |
2 | |||
T72 | 013599 |
Bearing, outer |
2 | |||
T73 | 138090 |
Seal, oil, outerThis item has been superceded by GHS133 - see below |
2 | |||
GHS133 |
SEAL REAR HUB OUTER TR4A-6 large |
2 |
£9.59 Ex VAT @ 20% |
|||
T74 | 134584 |
AdjusterThis item has been superceded by ULC2188 - see below |
2 | |||
ULC2188 |
ADJUSTER |
2 |
£27.02 Ex VAT @ 20% |
|||
T75 | 137497 |
Stoneguard |
2 |
£8.71 Ex VAT @ 20% |
||
T76 | 138861 |
Nut, adjusting |
2 |
£16.08 Ex VAT @ 20% |
||
T77 | 139057 |
Washer, tab |
2 |
£5.09 Ex VAT @ 20% |
||
T78 | 134585 |
Nut, lock |
2 |
£9.55 Ex VAT @ 20% |
||
T79 | 210979 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: For use with Disc Wheels only |
2 |
£172.48 Ex VAT @ 20% |
||
T80 | 132317 |
Stud, wheelTriumph Catalogue Remarks: For use with Disc Wheels only |
8 |
£6.11 Ex VAT @ 20% |
||
T80A | 212403 |
DRIVING FLANGE AND HUB ASSEMBLYTriumph Catalogue Remarks: For use with Wire Wheels only |
2 |
£273.07 Ex VAT @ 20% |
||
T80B | 142799 |
Stud, wheelTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£7.43 Ex VAT @ 20% |
||
T80C | 202446 |
Hub, extension R H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
217602 |
HUB ADAPTOR RH WIRE WHEELRevington TR information: consider second hand parts 217602SH and 217603SH |
1 | ||||
T80D | 202447 |
Hub, extension L H.Triumph Catalogue Remarks: For use with Wire Wheels only |
1 | |||
217603 |
HUB ADAPTOR LH WIRE WHEEL TR3-6Revington TR information: consider second hand parts 217602SH and 217603SH |
1 |
£89.35 Ex VAT @ 20% |
|||
T80E | 110366 |
Nut, extension to hubTriumph Catalogue Remarks: For use with Wire Wheels only |
8 |
£2.66 Ex VAT @ 20% |
||
T81 | 134591 |
Key Driving flange to outer axle shaft |
2 |
£5.41 Ex VAT @ 20% |
||
T82 | WM0063 |
Washer, plain Driving flange to outer axle shaft |
2 |
£2.05 Ex VAT @ 20% |
||
T83 | 138563 |
Nut, nyloc Driving flange to outer axle shaftThis item has been superceded by NY610243 - see below |
2 | |||
NY610243 |
NUT NYLOC 5/8UNF x ¾" TALL 1-1/8" AFRevington TR information: Nut 5/8" UNF ¾" tall and 1-1/8" AF. This nut is horrendously expensive; it was originally part number 138563 used on TR4A-6 differential Axle Shafts. See 'MORE' for a list of other special duty nuts for... READ MORE |
2 |
£21.72 Ex VAT @ 20% |