Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR4A Plate U - RIGID REAR AXLE.
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
![]() |
U1AA | 514601 |
REAR AXLE ASSEMBLY (3.7 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: USE 514754 |
1 | ||
![]() |
U1BB | 514754 |
REAR AXLE ASSEMBLY (3.7 to 1 Ratio) (Less Half Shafts and Brake Units)Triumph Catalogue Remarks: Reconditioned Unit |
1 |
£1053.06 Ex VAT @ 20% |
|
![]() |
U1CC | 514602 |
REAR AXLE ASSEMBLY (4.1 to 1 Ratio) (Less Half Shafts and Brake Units)Revington TR information: USE 514755 |
1 | ||
![]() |
U1DD | 514755 |
REAR AXLE ASSEMBLY (4.1 to 1 Ratio) (Less Half Shafts and Brake Units)Triumph Catalogue Remarks: Reconditioned Unit |
1 |
£1053.06 Ex VAT @ 20% |
|
![]() |
U1 | 307147 |
AXLE CASING ASSEMBLY |
1 | ||
![]() |
U2 | 125361 |
Nipple, grease, axle tube ends |
2 |
£2.11 Ex VAT @ 20% |
|
![]() |
U3 | 013599 |
Screw, set Bearing cap to casing |
4 | ||
![]() |
U4 | WL0209 |
Washer, lock Bearing cap to casingThis item has been superceded by WS106111243 - see below |
4 | ||
![]() |
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
4 |
£0.37 Ex VAT @ 20% |
||
![]() |
U5 | 056894 |
Breather Fitted in housing |
1 | ||
![]() |
U6 | 056895 |
Washer, fibre Fitted in housingThis item has been superceded by WF509 - see below |
1 | ||
![]() |
WF509 |
FIBRE WASHER 3/8 |
1 |
£1.22 Ex VAT @ 20% |
||
![]() |
U6A | 113193 |
Bracket, compensator and boss sub assembly |
1 | ||
![]() |
U6B | 125362 |
Nipple, grease, compensator bracketThis item has been superceded by RTR5079 - see below |
1 | ||
![]() |
RTR5079 |
GREASE NIPPLE STRAIGHT 1/4 UNFRevington TR information: 1/4" UNF straight short |
1 |
£1.49 Ex VAT @ 20% |
||
![]() |
U7 | 058800 |
Seal, oil, axle tube endsThis item has been superceded by GHS185 - see below |
2 | ||
![]() |
GHS185 |
SEAL OIL AXLE TUBE TR3G-4 |
2 |
£13.90 Ex VAT @ 20% |
||
![]() |
U8 | 110515 |
Bearing, between differential unit and casing |
2 |
£62.52 Ex VAT @ 20% |
|
![]() |
U8A | 100894 |
Shim, bearing adjusting .003" |
£3.11 Ex VAT @ 20% |
||
![]() |
U9 | 100895 |
Shim, bearing adjusting .005"This item has been superceded by 100895/5 - see below |
as req'd | ||
![]() |
100895/5 |
SHIM-DIFF PINION 0.005 |
as req'd |
£4.08 Ex VAT @ 20% |
||
![]() |
U9A | 100896 |
Shim, bearing adjusting .010"This item has been superceded by 100896/10 - see below |
|||
![]() |
100896/10 |
SHIM-DIFF PINION 0.010 |
£1.39 Ex VAT @ 20% |
|||
![]() |
DIFFERENTIAL UNIT ASSEMBLY |
|||||
![]() |
U10 | 302155 |
Casing, differentialRevington TR information: TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use Second Hand part 302155SH or complete carrier with second hand... READ MORE |
1 | ||
![]() |
302155SH |
Second Hand DIFF. CARRIER TR3-6Revington TR information: Second hand TR3-6 Girling only diff Carrier which uses thick 153385 planet gears and accommodates TR3-4A Girling half shafts and TR5-6 independent side shafts. Not available new use this Second Hand part 302155SH or complete carrier... READ MORE |
1 |
£156.60 Ex VAT @ 20% |
||
![]() |
U11 | 113187 |
Gear, side, differentialThis item has been superceded by 153384 - see below |
2 | ||
![]() |
153384 |
SIDE GEAR DIFF TR3G-6 16 TEETHRevington TR information: This part is not available new, please consider second hand part number 153384SH or complete differential carrier assemblies 302155X and 302155XSH |
2 |
£124.64 Ex VAT @ 20% |
||
![]() |
U12 | 102801 |
Washer, thrust, differential gear |
2 |
£4.22 Ex VAT @ 20% |
|
![]() |
U13 | 113188 |
Gear, pinion, differentialThis item has been superceded by 153385 - see below |
2 | ||
![]() |
153385 |
GEAR DIFF PLANET TR3-6Revington TR information: 10 tooth pinion gear 15.5mm thick. This part is not available new, please consider second hand part number 153385SH or complete differential carrier assemblies 302155X and 302155XSH. . All TR s from Girling TR3-TR6 use... READ MORE |
2 |
£53.32 Ex VAT @ 20% |
||
![]() |
U13A | 056793 |
Washer, thrust, differention gear .0465"/.0495'This item has been superceded by 139951 - see below |
|||
![]() |
139951 |
Washer, thrust, differention gear .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
|||
![]() |
U13B | 139951 |
Washer, thrust, differention gear .057"/.059"Revington TR information: Thrust washer 0.052" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£9.07 Ex VAT @ 20% |
||
![]() |
U13C | 139952 |
Washer, thrust, differention gear .061"/.063"Revington TR information: Thrust Washer 0.056" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£8.70 Ex VAT @ 20% |
||
![]() |
U14 | 139953 |
Washer, thrust, differention gear .065"/.067"Revington TR information: Thrust Washer 0.060" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
2 |
£11.57 Ex VAT @ 20% |
|
![]() |
U14A | 139954 |
Washer, thrust, differention gear .069"/.071'Revington TR information: Thrust Washer 0.064" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
as req'd |
£15.88 Ex VAT @ 20% |
|
![]() |
U14B | 139955 |
Washer, thrust, differention gear .073"/.075"Revington TR information: Thrust Washer 0.068" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
||
![]() |
U14C | 139956 |
Washer, thrust, differention gear .072"/.074"Revington TR information: Thrust Washer 0.072" thick. These thrust washers are dished, have an internal diameter of 16.26mm, an outside diameter of 33.24mm and are dished by approximately 2.68mm. A selection of various thicknesses of cupped washer are available... READ MORE |
£7.60 Ex VAT @ 20% |
||
![]() |
U15 | 100844 |
Pin, cross, pinion gear |
1 |
£43.52 Ex VAT @ 20% |
|
![]() |
U16 | 111215 |
Pin, locating, cross pin in differential casingRevington TR information: not available new, use second hand part 111215SH |
1 |
£9.07 Ex VAT @ 20% |
|
![]() |
111215SH |
LOCATING PIN SECOND HAND |
1 |
£1.50 Ex VAT @ 20% |
||
![]() |
U17 | 109566 |
Button, thrust, on cross pinRevington TR information: Call for price and availability |
1 | ||
![]() |
U18 | 502127 |
Crown wheel and pinion (3.7 to 1 ratio)Revington TR information: CWP 3.7:1 ratio TR2-4. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£529.28 Ex VAT @ 20% |
|
![]() |
502127SH |
Second Hand CWP 3.7:1 TR2-6 |
1 pair |
£266.09 Ex VAT @ 20% |
||
![]() |
U18 | 505014 |
Crown wheel and pinion (4.1 to 1 ratio)Revington TR information: CWP 4.1:1 ratio TR2-6. This crown wheel and pinion set is available from time to time for TR2-6. When used with the appropriate bearings, TR2-4 will fit TR4AIRS-6 and vice versa. |
1 pair |
£403.88 Ex VAT @ 20% |
|
![]() |
505014SH |
Second Hand CWP 4.1:1 TR4-6 |
1 pair |
£317.58 Ex VAT @ 20% |
||
![]() |
U19 | 110737 |
Bolt Crown wheel to differential casing |
10 |
£2.12 Ex VAT @ 20% |
|
![]() |
U20 | 118977 |
Washer, lock Crown wheel to differential casingThis item has been superceded by WS106111243 - see below |
10 | ||
![]() |
WS106111243 |
WASHER SPRING 3/8" RECT SECTION |
10 |
£0.37 Ex VAT @ 20% |
||
![]() |
U21 | 100897 |
Bearing, pinion headThis item has been superceded by 100897A - see below |
1 |