Home » Engine, Transmission, wheels/Tyres and Heating/Cooling » WHEELS AND TYRES » WHEELS » WHEEL NUTS, STUDS AND SPACERS

Engine, Transmission, wheels/Tyres and Heating/Cooling

WHEEL NUTS, STUDS AND SPACERS

6 results found.

	Part No.	Description and Comments	Price	Add to Cart
	RTR1338N CLICK FOR MORE INFO	WHEEL NUT FOR MINILITE WHEEL etc. 7/16UNF Revington TR information: Road wheel attachment nut with 7/16" UNF thread (standard TR2-6 wheel studs). Suits many wheels including Minilite, Compomotive and any other wheel requiring a conical seal. Sold singularly. Be sure these wheel attachment nuts... READ MORE	£4.63 Ex VAT @ 20% £3.86	Available to order
	RTR1338LKN CLICK FOR MORE INFO	NUT LOCKING ALLOYS KIT 4 Revington TR information: Set of 4 locking wheel nuts 7/16" UNF. Use this set , one for eacj wheel to secure your TR2-6 standard steel wheels and many Alloy wheels (Minilite, Compomotive etc.). This nut is used to substitute... READ MORE		No longer available
	RTR1346 CLICK FOR MORE INFO	NUT WHEEL SLEEVE TYPE 2B 5/8" Revington TR information: Wheel nut suitable for 7/16"UNF wheel studs intended for attaching aluminium wheels with a flat face (not conical) where the nut attaches, requiring a sleeve nut with a 5/8" (16mm) plain section 3/4" long where the... READ MORE	£8.77 Ex VAT @ 20% £7.31
	RTR1346SLEEVE CLICK FOR MORE INFO	SLEEVE TO CONVERT 5/8" NUT TO 11/16" Revington TR information: 'Top hat' shaped adaptor sleeve for wheels that need an 11/16" (17.5mm). This Sleeve converts an RTR1346 sleeve nut from 5/8" (16mm) to 11/16" (17.5mm). Wheel nut RTR1346 is suitable for 7/16"UNF wheel studs intended for... READ MORE	£3.90 Ex VAT @ 20% £3.25
	RTR1259 CLICK FOR MORE INFO	NUT WHEEL AMERICAN RACING SS Revington TR information: Wheel nut manufactured from stainless steel for American racing inc. wheels and other wheels requiring a sleeve nut. These nuts are of the sleeve type where the sleeve is 17.5mm diameter, 15.5mm long and the thread... READ MORE	£23.27 Ex VAT @ 20% £19.39	Available to order
	217602S CLICK FOR MORE INFO	SPACER W/W TO ST/WHEEL TR2-6 Revington TR information: TR3G-6 Accurately machined spacer approximately 6mm thick. This spacer fits behind a wire wheel adapter and enables the adapter and 4 adapter nuts to be flitted without shortening wheel studs. The spacer was designed by... READ MORE	£37.02 Ex VAT @ 20% £30.85

6 results found.

17 plates in total

ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

PLATE N - ENGINE (Petrol Injection Model): Block and Sump Engine Unit 9.5:1, Decarbonising Gasket Set, Engine Gasket Set, Cylinder Block, Cylinder Liner, Rear Oil Seal Housing, Oil Pressure Adjustment Details, Oil Pump Assembly, Oil Sump Assembly, Dipstick Assembly, Front Engine Plate, Engine Mounting Bracket Assy, Rear Engine Plate, Engine Lifting Eyes, Oil Pressure Switch

ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

PLATE Q - ENGINE (Petrol Injection Model): Crankshaft, Camshaft, Pistons and Flywheel Crankshaft Assembly, Fan Assembly, Flywheel Assembly, Camshaft, Timing Cover Assembly, COnnecting Rod Assembly, Piston Assembly, Drive Shaft Assembly, Pedestal Assembly - Distributor and Petrol Injection Metering Pump

ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

PLATE W - ENGINE (Petrol Injection Model): Oil Filter Oil Filter Assembly (Full Flow)

ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

PLATE P - ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies Cylinder Head Assembly 9.5:1, Valves, Push Rod, Tappet, Rocker Shaft, Rocker Cover Assembly

ENGINE (Petrol Injection Model): Alternator Mounting

PLATE X - ENGINE (Petrol Injection Model): Alternator Mounting

ENGINE (Petrol Injection Model): Closed Circuit Breather

PLATE T - ENGINE (Petrol Injection Model): Closed Circuit Breather

ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

PLATE R - ENGINE (Petrol Injection Model): Water Pump and Thermostat Water Pump Details, Thermostat Unit, Temperature Transmitter

ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

PLATE S - ENGINE (Petrol Injection Model): Manifolds and Heater Pipe Exhaust and Inlet Manifold, Manifold Gasket, Throttle Spindles and Butterflies, Heater Pipe-solid under manifolds

CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1

PLATE Y - CLUTCH: Clutch Assembly and Operation Clutch Cover Assembly - Borg and Beck, Driven Plate Assembly - Borg and Beck, Clutch Cover Assembly - Laycock, Driven Plate Assembly - Laycock, Clutch Throw Out Bearing, Clutch Operating Fork, Clutch Operating Shaft Assembly, Clutch Slave Cylinder Assembly (1")

GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

PLATE Z - GEARBOX: External Gearbox Unit, Gearbox Gasket Set, Gearbox and Clutch housing Assembly, Front End Cover, Gearbox Extension, Speedo Driven Gear and Bearing, Top Cover Assembly, Change Speed Lever Assembly, Gearbox Attachment Details, Rear Engine Mounting

GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

PLATE AA - GEARBOX: Internal Mainshaft, Constant Gear Train Assembly, Constant Pinion Shaft, Countershaft, Reverse Spindle, Reverse Operating Lever Assembly

OVERDRIVE: 'A' Type: Kit

PLATE CA - OVERDRIVE: 'A' Type: Kit

OVERDRIVE: 'A' Type: Unit Assembly

PLATE CB - OVERDRIVE: 'A' Type: Unit Assembly

PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

PLATE AG - PROPELLOR SHAFT AND ROAD WHEELS Propellor Shaft, Disc Road Wheel, Centre Lock Wire Wheels, Balance Weights, Wheel Trim - Road Wheels

INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

PLATE AE - INDEPENDENT REAR AXLE Rear Axle Center Assembly, Crown Wheel and Pinion Assembly, Inner Axle Shaft, Rear Axle Shaft and Hub Assembly, Outer Axle Shaft Assembly, Sleeve Yoke and Yoke Shaft Assembly, Drive Flange and Hub Assembly

RADIATOR Radiator Block Assembly, Overflow Bottle

PLATE AV - RADIATOR Radiator Block Assembly, Overflow Bottle

BODY AND FITTINGS: Heater Heater Details, Demister Outlet

PLATE BR - BODY AND FITTINGS: Heater Heater Details, Demister Outlet