- Part Detail
- CLICK TO VIEW
TRIUMPH PLATES - Browse Original Triumph Catalogue Plates
This part appears on the following Triumph Catalogue Plates
| Car Type | Plate | Plate Title | Plate No. | Triumph Part Description | No per Unit |
| TR2 | A | ENGINE: CYLINDER BLOCK AND HEAD | A80A | Washer, plain, under nut | 2 |
| TR2 | G | ENGINE: 1-1/2" SU CARBURETTORS. | G82 | Washer, plain, between lever and split pin From Engine No. 1 |
1 |
| TR2 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR2 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31A | Washer, plain, on bolt From Comm. No. TS1 |
1 |
| TR2 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31AO | Washer, plain | I |
| TR2 | GS | ENGINE: 1-3/4" SU CARBURETTORS. | GS80 | Washer, plain, between lever and split pin From Engine No. 8997E |
1 |
| TR2 | T | PEDALS: ACCELERATOR, CLUTCH AND BRAKE. | T35 | Washer, plain, between spring washer and cotter pin From Comm. No. TS1 |
2 |
| TR2 | C | ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). | C26L | Washer, plain, dynamo to bracket From Engine No. 10346E |
A/R |
| TR2 | C | ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). | C26U | Washer, plain, on setscrew From Engine No. 1 |
1 |
| TR2 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR2 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR2 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR2 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S26 | Washer, plain, between cotter pin and fork-end | 1 |
| TR2 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S47 | Washer, plain, between cotter pin and fork-end | 2 |
| TR2 | K | GEARBOX: CASING, TOP COVER AND MOUNTING. | K13 | Washer, plain, on screws From Comm. No. TS1 |
2 |
| TR2 | W | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | W26AH | Washer, plain, under nut From Comm. No. TS13046 |
1 |
| TR2 | AW | OVERDRIVE UNIT DETAILS. | AW45 | Washers, plain, on setscrew | 2 |
| TR2 | AW | OVERDRIVE UNIT DETAILS. | AW45 | Washers, plain, on setscrew | 2 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X17B | Washer, plain, on bolt | 2 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X17B | Washer, plain, on bolt | 2 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X20A | Washer, plain, on bolt | 2 |
| TR2 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X20A | Washer, plain, on bolt | 2 |
| TR3 | A | ENGINE: CYLINDER BLOCK AND HEAD | A80A | Washer, plain, under nut | 2 |
| TR3 | G | ENGINE: 1-1/2" SU CARBURETTORS. | G82 | Washer, plain, between lever and split pin From Engine No. 1 |
1 |
| TR3 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR3 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31A | Washer, plain, on bolt From Comm. No. TS1 |
1 |
| TR3 | R | STEERING: STEERING UNIT, IDLER, TIE RODS AND STEERING WHEEL. | R31AO | Washer, plain | I |
| TR3 | GS | ENGINE: 1-3/4" SU CARBURETTORS. | GS80 | Washer, plain, between lever and split pin From Engine No. 8997E |
1 |
| TR3 | T | PEDALS: ACCELERATOR, CLUTCH AND BRAKE. | T35 | Washer, plain, between spring washer and cotter pin From Comm. No. TS1 |
2 |
| TR3 | C | ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). | C26L | Washer, plain, dynamo to bracket From Engine No. 10346E |
A/R |
| TR3 | C | ENGINE: WATER PUMP ASSEMBLY AND DYNAMO MOUNTING (Not illustrated). | C26U | Washer, plain, on setscrew From Engine No. 1 |
1 |
| TR3 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR3 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR3 | AN | BODY AND FITTINGS: STEERING COLUMN MOUNT, FACIA PANEL, CUBBY BOX AND INSTRUMENT PANEL. | AN14 | Washer, plain, under nut | 2 |
| TR3 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S26 | Washer, plain, between cotter pin and fork-end | 1 |
| TR3 | S | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | S47 | Washer, plain, between cotter pin and fork-end | 2 |
| TR3 | K | GEARBOX: CASING, TOP COVER AND MOUNTING. | K13 | Washer, plain, on screws From Comm. No. TS1 |
2 |
| TR3 | W | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | W26AH | Washer, plain, under nut From Comm. No. TS13046 |
1 |
| TR3 | AW | OVERDRIVE UNIT DETAILS. | AW45 | Washers, plain, on setscrew | 2 |
| TR3 | AW | OVERDRIVE UNIT DETAILS. | AW45 | Washers, plain, on setscrew | 2 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X17B | Washer, plain, on bolt | 2 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X17B | Washer, plain, on bolt | 2 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X20A | Washer, plain, on bolt | 2 |
| TR3 | X | EXHAUST SYSTEM, RADIATOR AND MISCELLANEOUS CHASSIS DETAILS. | X20A | Washer, plain, on bolt | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z11 | Washer, plain Silencer to tail pipe | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z11 | Washer, plain Silencer to tail pipe | 2 |
| TR4 | Z | EXHAUST SYSTEM, RADIATOR, TOOLS AND SERVICE KITS. | Z11 | Washer, plain Silencer to tail pipe | 2 |
| TR4 | N | CHASSIS FRAME AND RADIATOR SKID SHIELD. | N28 | Washer, plain Rebound brackets to front spring abutment bracket | 4 |
| TR4 | A | ENGINE: CYLINDER BLOCK AND HEAD. | A90 | Washer, plain Rocker cover attachment | 2 |
| TR4 | H | ENGINE: 1-3/4" SU CARBURETTORS. | H76 | Washer, plain, between lever and split pin Fitted up to Engine No. CT168DOE and from CT16901E up to CT only |
1 |
| TR4 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR4 | JA | ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | J9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR4 | BB | OVERDRIVE: OVERDRIVE UNIT DETAILS | BB54 | Washer, plain Attaching Solenoid bracket to front casing | 2 |
| TR4 | BB | OVERDRIVE: OVERDRIVE UNIT DETAILS | BB54 | Washer, plain Attaching Solenoid bracket to front casing | 2 |
| TR4 | HS | ENGINE: 1-3/4" STROMBERG CARBURETTORS. | HS70 | Washer, plain Lever to manifold Fitted from Engine No. CT16801E up to CT16900E and from CT and future |
1 |
| TR4 | W | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. | W10 | Washer, plain Master cylinder fork ends to pedals | 2 |
| TR4 | U | HANDBRAKE: LEVER, CABLES AND COMPENSATOR. | U47 | Washer, plain, between cotter pin and fork-end | 2 |
| TR4 | Y | HYDRAULIC PIPES, PETROL PIPES, PETROL TANK AND SENDER UNIT. | Y24 | Washer, plain, under nut | 1 |
| TR4 | AW | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | AW27 | Washer, plain Support tubes to overiders | 2 |
| TR4 | AW | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | AW66 | Washer, plain Tie rods to overiders | 2 |
| TR4A | A | 83 m.m. and 86 m.m. ENGINE: BLOCK AND HEAD | A82 | Washer, plain Rocker cover attachment | 2 |
| TR4A | M | 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | M9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR4A | M | 83 m.m. and 86 m.m. ENGINE: DYNAMO MOUNTING AND IGNITION (Not illustrated). | M9 | Washer, plain Dynamo to bracket rear | as req'd. |
| TR4A | K | 83 m.m. and 86 m.m. ENGINE: 1-3/4" STROMBERG CARBURETTORS. | K70 | Washer, plain manifold Fitted up to Engine No only |
1 |
| TR4A | KS | 83 m.m. and 86 m.m. ENGINE: 1-3/4" SU CARBURETTORS. | KS74 | Washer, plain Securing bellcrank lever to support bracket Fitted from Engine No and future |
1 |
| TR4A | L | 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. | L4 | Washer, plain Air cleaner to carburettor Normal Fitment |
4 |
| TR4A | L | 83 m.m. and 86 m.m. ENGINE: AIR CLEANERS. | L17 | Washer, plain Air cleaner to carburettors Special orders only |
4 |
| TR4A | BJ | OVERDRIVE: OVERDRIVE UNIT DETAILS (Rigid axles only). | BJ54 | Washer, plain Attaching Solenoid bracket to front casing | 2 |
| TR4A | BK | OVERDRIVE: OVERDRIVE UNIT DETAILS (independent rear axles only). | BK53 | Washer, plain Attaching solenoid bracket to front casing | 2 |
| TR4A | AG | RADIATOR AND OVERFLOW BOTTLE. TOOLS AND SERVICE KITS (Not illustrated). | AG12 | Washer, plain Stay to front suspension box | 4 |
| TR4A | AB | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS AND SUPPORT BRACKET. | AB10 | Washer, plain Master cylinder fork ends to pedals | 2 |
| TR4A | AFS | EXHAUST SYSTEM: SINGLE REAR TRANSVERSE SILENCER TYPE. | AFS27 | Washer Securing silencer to rear end of Intermediate pipe and mounting bracket Fitted from Comm. No and future |
1 |
| TR4A | AQ | BODY AND FITTINGS: BODY COMPLETE, BODY MOUNTINGS. | AQ38 | Washer, plain Body mounting spare wheel pan | 1 |
| TR4A | AT | BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. | AT7 | Washer, plain Bonnet hinge to closing panel | 4 |
| TR4A | AT | BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER DETAILS, MEDALLION. | AT9 | Washer, plain Bonnet hinge to front stiffener assembly | 8 |
| TR4A | AW | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. | AW68 | Washer, plain Support bracket to fixing bracket | 2 |
| TR4A | AW | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX AND SWITCH PLINTH. | AW68 | Washer, plain Support bracket to fixing bracket | 2 |
| TR4A | BD | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS. | BD60 | Washer, plain Tie rods to overiders | 2 |
| TR250 | AE | ELECTRICAL EQUIPMENT: Distributor and Ignition Coil | AE31 | Washer, plain - Ignition coil attachment | 2 |
| TR250 | B | ENGINE: Cylinder Head | B51 | Washer, plain - Rocker cover to cylinder head studs | 3 |
| TR250 | V | STEERING | V22 | Washer, plain - Securing joint to columns | 2 |
| TR250 | V | STEERING | V61 | Washer, plain - Rack and pinion body to frame | 4 |
| TR250 | AQ | BODY FITTINGS: Body Shell to Chassis Mountings | AQ44 | Washer, plain - Body mounting spare wheel pan | 1 |
| TR250 | M | ENGINE: Alternator Mounting | M5 | Washer, plain Alternator to mounting bracket | 1 |
| TR250 | M | ENGINE: Alternator Mounting | M5 | Washer, plain Alternator to mounting bracket | 1 |
| TR250 | X | ACCELERATION CONTROL | X20 | Washer, plain - Bell crank lever to support bracket | 1 |
| TR250 | AT | BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies | AT7 | Washer, plain - Bonnet hinge to closing panel | 4 |
| TR250 | AT | BODY AND FITTINGS: Radiator Grille and Bonnet Assemblies | AT10 | Washer, plain - Bonnet hinge to front stiffener assembly | 8 |
| TR250 | AW | BODY AND FITTINGS: Facia Panel Assembly | AW66 | Washer, plain - Support bracket to fixing bracket | 2 |
| TR250 | AW | BODY AND FITTINGS: Facia Panel Assembly | AW66 | Washer, plain - Support bracket to fixing bracket | 2 |
| TR250 | Y | BRAKE CONTROLS: Clutch and Brake Pedal, and Master Cylinder | Y14 | Washer, plain - Master cylinder fork ends to pedals | 2 |
| TR250 | N | CLUTCH | N41 | Washer, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR250 | N | CLUTCH | N41 | Washer, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR250 | W | HANDBRAKE | W27 | Washer, plain - Fork end to wheel cylinder lever and cable | 2 |
| TR250 | BC | BODY AND FITTINGS: Bumpers | BC60 | Washer, plain - Tie rods to overriders | 2 |
| TR250 | AC | EXHAUST SYSTEM | AC23 | Washer - Flexible strip to bracket and chassis frame | 1 |
| TR5 | AF | ELECTRICAL EQUIPMENT: DISTRIBUTOR AND IGNITION COIL | AF33 | Washer, plain Ignition coil attachment | 2 |
| TR5 | U | STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS | U22 | Washer, plain Securing joint to columns | 2 |
| TR5 | U | STEERING: STEERING WHEEL, STEERING COLUMN, RACK AND PINION AND MOUNTINGS | U61 | Washer, plain Rack and pinion body to frame | 4 |
| TR5 | AR | BODY AND FITTINGS: COMPLTE BODY AND BODY MOUNTINGS | AR44 | Washer, plain Body mounting spare wheel pan | 1 |
| TR5 | B | ENGINE: CYLINDER HEAD | B51 | Washer, plain Rocker cover to cylinder head studs | 3 |
| TR5 | K | ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS | K5 | Washer, plain Alternator to mounting bracket | 1 |
| TR5 | K | ENGINE: ALTERNATOR MOUNTING, SPARK PLUGS AND HT LEADS | K5 | Washer, plain Alternator to mounting bracket | 1 |
| TR5 | AU | BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION | AU7 | Washer, plain Bonnet hinge to closing panel | 4 |
| TR5 | AU | BODY AND FITTINGS: GRILL, BONNET AND BONNET FASTENER AND RELEASE DETAILS, MEDALLION | AU10 | Washer, plain Bonnet hinge to stiffener front assembly | 8 |
| TR5 | X | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT | X9A | Washer, plain Pedal box to dash-R.H.S. only | 2 |
| TR5 | X | CLUTCH AND BRAKE PEDALS: MASTER CYLINDERS, SUPPORT BRACKET AND SERVO UNIT | X14 | Washer, plain Master cylinder fork ends to pedals | 2 |
| TR5 | AX | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME | AX66 | Washer, plain Support bracket to fixing bracket | 2 |
| TR5 | AX | BODY AND FITTINGS: METAL AND VENEERED FACIA PANELS, CUBBY BOX , SWITCH PLINTH AND H FRAME | AX66 | Washer, plain Support bracket to fixing bracket | 2 |
| TR5 | L | CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER | L41 | Washer, plain Slave cylinder push rod to clutch operating lever | 1 |
| TR5 | L | CLUTCH: COVER, PLATE, RELEASE MECHANISM AND SLAVE CYLINDER | L41 | Washer, plain Slave cylinder push rod to clutch operating lever | 1 |
| TR5 | V | HANDBRAKE: LEVER AND CABLES | V27 | Washer, plain Fork end to wheel cylinder lever and cable | 2 |
| TR5 | BJ | OVERDRIVE: ASSEMBLY DETAILS | BJ53 | Washer, plain Attaching solenoid bracket to front casing | 2 |
| TR5 | BD | BODY AND FITTINGS: FRONT AND REAR BUMPERS AND OVERRIDERS | BD60 | Washer, plain Tie rods to overriders | 2 |
| TR5 | AC | EXHAUST SYSTEM AND MOUNTINGS | AC26 | Washer Strip to brackets and chassis | 1 |
| TR6CP | AX | ELECTRICAL EQUIPMENT: Distributor and Coil | AX33 | WASHER, plain - Ignition coil attachment | 2 |
| TR6CP | P | ENGINE (Petrol Injection Model): Cylinder Head and Rocker Assemblies | P51 | WASHER, plain -Rocker cover to cylinder head studs | 3 |
| TR6CP | AH | STEERING | AH59 | WASHER, plain - Rack and pinion body to frame | 4 |
| TR6CP | BH | BODY AND FITTINGS: Body Shell Complete and Mounting | BH44 | WASHER, plain - Body mounting spare wheel pan | 1 |
| TR6CP | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP66 | WASHER, plain - Support bracket to fixing bracket | 2 |
| TR6CP | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP66 | WASHER, plain - Support bracket to fixing bracket | 2 |
| TR6CP | AL | ACCELERATION CONTROL (PETROL INJECTION MODEL) | AL56W | WASHER, plain, fast idle cam to mounting bracket Fitted from Engine No. CF1 HE |
1 |
| TR6CP | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CP | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CP | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CP | BL | BODY AND FITTINGS: Radiator Grill and Bonnet Assembly | BL7 | WASHER, plain - Bonnet hinge to bonnet | 8 |
| TR6CP | BS | BODY AND FITTINGS: Boot Assembly and Rear Decals | BS4 | WASHER, plain - Hinges to trunk lid | 6 |
| TR6CP | CB | OVERDRIVE: 'A' Type: Unit Assembly | CB53 | WASHER, plain — Attaching solenoid bracket to front casing | 2 |
| TR6CP | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM9B | WASHER, plain - Pedal box to dash - R.H.S. only | 2 |
| TR6CP | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM14 | WASHER, plain - Master cylinder fork ends to pedals | 2 |
| TR6CP | Y | CLUTCH: Clutch Assembly and Operation | Y41 | WASHER, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR6CP | Y | CLUTCH: Clutch Assembly and Operation | Y41 | WASHER, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR6CP | BV | BODY AND FITTINGS: Bumpers | BV6 | WASHER, plain - Front bumper side fixing Fitted up to Comm. No. CF1 |
2 |
| TR6CP | BV | BODY AND FITTINGS: Bumpers | BV39 | WASHER, plain — Securing bumper to side bracket Fitted up to Comm. No. CP26933 and CC31778 |
2 |
| TR6CP | AJ | HANDBRAKE | AJ27 | WASHER, plain - Fork end to wheel cylinder lever and cable | 2 |
| TR6CP | AU | EXHAUST SYSTEM (PETROL INJECTION MODEL) | AU26 | WASHER - Strip to brackets and chassis | 1 |
| TR6CC | AX | ELECTRICAL EQUIPMENT: Distributor and Coil | AX33 | WASHER, plain - Ignition coil attachment | 2 |
| TR6CC | B | ENGINE (Carburettor Model): Cylinder and Rocker Assemblies | B51 | WASHER, plain -Rocker cover to cylinder head studs | 3 |
| TR6CC | AH | STEERING | AH59 | WASHER, plain - Rack and pinion body to frame | 4 |
| TR6CC | BH | BODY AND FITTINGS: Body Shell Complete and Mounting | BH44 | WASHER, plain - Body mounting spare wheel pan | 1 |
| TR6CC | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP66 | WASHER, plain - Support bracket to fixing bracket | 2 |
| TR6CC | BP | BODY AND FITTINGS: Dashboard, Scuttle & 'H' Frame | BP66 | WASHER, plain - Support bracket to fixing bracket | 2 |
| TR6CC | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CC | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CC | BQ | BODY AND FITTINGS: Steering Outer Column | BQ34D | WASHER,plain-Securing upper clamp to lower Fitted from Body No. 50,001 wherever lock type steering is fitted |
2 |
| TR6CC | BL | BODY AND FITTINGS: Radiator Grill and Bonnet Assembly | BL7 | WASHER, plain - Bonnet hinge to bonnet | 8 |
| TR6CC | BS | BODY AND FITTINGS: Boot Assembly and Rear Decals | BS4 | WASHER, plain - Hinges to trunk lid | 6 |
| TR6CC | CB | OVERDRIVE: 'A' Type: Unit Assembly | CB53 | WASHER, plain — Attaching solenoid bracket to front casing | 2 |
| TR6CC | AK | ACCELERATION CONTROL (CARBURETTOR MODEL) | AK20 | WASHER, plain - Bell crank lever to support bracket | 1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR10AQ | WASHER, plain - Securing bracket assembly canister mounting Fitted from Body No. CC62448 up to ............ |
1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR10AQ | WASHER, plain - Securing bracket assembly canister mounting Fitted from Body No. CC62448 up to ............ |
1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR11BH | WASHER, plain - Securing bracket assembly canister mounting | 1 |
| TR6CC | AR | PETROL SYSTEM (CARBURETTOR MODEL) | AR11BH | WASHER, plain - Securing bracket assembly canister mounting | 1 |
| TR6CC | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM9B | WASHER, plain - Pedal box to dash - R.H.S. only | 2 |
| TR6CC | AM | CLUTCH, BRAKE PEDALS & MASTER CYLINDER | AM14 | WASHER, plain - Master cylinder fork ends to pedals | 2 |
| TR6CC | Y | CLUTCH: Clutch Assembly and Operation | Y41 | WASHER, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR6CC | Y | CLUTCH: Clutch Assembly and Operation | Y41 | WASHER, plain - Slave cylinder push rod to clutch operating lever | 1 |
| TR6CC | BV | BODY AND FITTINGS: Bumpers | BV6 | WASHER, plain - Front bumper side fixing Fitted up to Comm. No. CF1 |
2 |
| TR6CC | BV | BODY AND FITTINGS: Bumpers | BV39 | WASHER, plain — Securing bumper to side bracket Fitted up to Comm. No. CP26933 and CC31778 |
2 |
| TR6CC | AJ | HANDBRAKE | AJ27 | WASHER, plain - Fork end to wheel cylinder lever and cable | 2 |
| TR6CC | AT | EXHAUST SYSTEM (CARBURETTOR MODEL) | AT23 | WASHER - Flexible strip to bracket and chassis frame ALL MARKETS up to Comm. No. CC67893 |
1 |
| TR6CF | 20-32 | ENGINE (CARB MODELS) | 20-32 | WASHER PLAIN 5/16 X 5/8 X .075 | 3 |
| TR6CF | 20-32 | ENGINE (CARB MODELS) | 20-32 | WASHER PLAIN 5/16 X 5/8 X .075 | 3 |
