Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR6 CF Plate 20-65 - CLUTCH RELEASE
Also in this listing
Cross Shaft, Slave Cylinder and Clutch Operation details| Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
|---|---|---|---|---|---|---|
 |
20-65 | 030047 |
WIREThis item has been superceded by RTR5285-2M - see below |
1 | ||
|
RTR5285-2M
|
LOCKING WIRE 1.02mm/MRevington TR information: Locking wire stainless steel 1.02mm dia. per meter |
1 |
£1.45 Ex VAT @ 20% |
||
|
20-65 | 100164 |
PIN |
1 |
£3.97 Ex VAT @ 20% |
|
|
20-65 | 106022 |
CLUTCH OPRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
|
|
20-65 | 136353 |
BRACKET MOUNTINGRevington TR information: Not available new, use Second Hand part 136353SH. |
1 | ||
|
20-65 | 136354 |
CLUTCHRevington TR information: Consider second hand part 136354SH. TR 2, 3, 4 and 4A use a slightly different shaft 108887. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side... READ MORE |
1 |
£44.33 Ex VAT @ 20% |
|
|
20-65 | 138572 |
ROD PUSH ASSYRevington TR information: Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K or second hand part 138572SH. |
1 |
£23.57 Ex VAT @ 20% |
|
|
20-65 | 147858 |
SLEEVERevington TR information: RTR recommend 147858PB made from very high grade phosphor bronze, which has no small pin preventing rotation and as a result no grooves are made by the operating pins. The original TR4A part was made from... READ MORE |
1 |
£29.09 Ex VAT @ 20% |
|
|
20-65 | 158777 |
PIN TAPERThis item has been superceded by 158777HD - see below |
1 | ||
|
158777HD |
PIN TAPER CLUTCH HEAVY DUTYRevington TR information: This is a hardened taper pin holding the fork to the cross shaft. This help overcome the frequent failure of this pin. Revington TR recommend drilling through the fork, through the shaft and out the other... READ MORE |
1 |
£17.27 Ex VAT @ 20% |
||
|
20-65 | 211060 |
CLUTCH SLAVE CYLINDER ASSYThis item has been superceded by UKC8677 - see below |
1 | ||
|
UKC8677 |
CLUTCH SLAVE CYLINDER TR250, 5, 6Revington TR information: Clutch slave cylinder TR250, 5 and 6. This part is 1" diameter. A repair kit is available part number GRK4007. GSY129 is a similar cylinder with a smaller bore.109746 is the TR2 part which can... READ MORE |
1 |
£43.90 Ex VAT @ 20% |
||
|
20-65 | 501207 |
SCREW BLEED |
1 |
£3.62 Ex VAT @ 20% |
|
|
20-65 | 513390 |
SERVICE K I TThis item has been superceded by GRK4007Z - see below |
1 | ||
|
GRK4007Z |
SEALS SLAVE TR5/6 |
1 |
£8.86 Ex VAT @ 20% |
||
|
20-65 | 513951 |
PISTON |
1 | ||
|
20-65 | 513952 |
CUP |
1 | ||
|
20-65 | 513954 |
SPRINGThis item has been superceded by 606731 - see below |
1 | ||
|
606731 |
SPRING IN SLAVE CYL |
1 | |||
|
20-65 | GRB211 |
RELEASE BEARINGThis item has been superceded by GRB211HD - see below |
1 | ||
 |
GRB211HD |
BEARING CLUTCH RELEASE H/DUTYRevington TR information: TR4A-6 Release bearing, heavy duty. The introduction of this bearing has been prompted by the recent poor quality of the original style bearing. GRB211HD is a modern bearing which is much more reliable than the original... READ MORE |
1 |
£77.89 Ex VAT @ 20% |
||
|
20-65 | HB0809 |
SCREW 5/16 UNF X 1-1/8 INCHThis item has been superceded by SH605091 - see below |
2 | ||
|
SH605091 |
SCREW 5/16 UNF X 1-1/8 INCH |
2 |
£1.22 Ex VAT @ 20% |
||
|
20-65 | HB813 |
BOLT 5/16 UNF X 1-5/8 INCHThis item has been superceded by BH605131 - see below |
2 | ||
|
BH605131 |
BOLT 5/16 UNF X 1-5/8 INCH |
2 |
£1.21 Ex VAT @ 20% |
||
|
20-65 | HN2008 |
NUT PLAIN 5/16 UNFThis item has been superceded by NP605081 - see below |
4 | ||
|
NP605081 |
NUT PLAIN 5/16 UNF |
4 |
£0.17 Ex VAT @ 20% |
||
|
20-65 | PC9 |
PIN SPLIT 3/32 X 7/8"This item has been superceded by PS106071 - see below |
1 | ||
|
PS106071 |
PIN SPLIT 3/32" X 7/8" |
1 |
£0.54 Ex VAT @ 20% |
||
|
20-65 | PJ8808 |
PIN CLEVIS 5/16 x 9/16 x 3/32This item has been superceded by PC1201771 - see below |
1 | ||
|
PC1201771 |
PIN CLEVIS 5/16 X 17/32 X 7/64 |
1 |
£1.55 Ex VAT @ 20% |
||
|
20-65 | WL208 |
WASHER SPRING 5/16" ID RECT SECTIONThis item has been superceded by WS105090853 - see below |
4 | ||
|
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
4 |
£0.25 Ex VAT @ 20% |
||
|
20-65 | WP8 |
WASHER PLAIN 5/16 X 5/8 X .075This item has been superceded by WP10510075 - see below |
1 | ||
|
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
1 |
£0.44 Ex VAT @ 20% |
Also in this listing
Cross Shaft, Slave Cylinder and Clutch Operation details