Choose Car Type

Search for parts
for parts

Our phone systems are currently down, please email


Part No:
Price Ex VAT @ 20%

IN STOCK This part is immediately available

This wheel stud which is 32mm long (measured from under the head), presses into the hub and is used at the front of TR3 (Disc brake cars) throughout the range to TR6 fitted with steel wheels.

Stud 114282 is specifically intended for the front only and has a flat face under the head. The studs fitted to the rear hubs of TR4A-6 have a conical face under the head.
Consider second hand original part 114282SH
See also RTR1219 and RTR1220 if longer studs are required.

Full list of original applications: -
TR2-3 Drum brake cars Front; wire wheels. No studs; spline integral with the hub
TR2-3 Drum brake cars Front; steel wheels. 100869
TR3 (Disc brake cars)-6 Front; wire wheels. 114281
TR3 (Disc brake cars)-6 Front; steel wheels. 114282

TR2-3 Lockheed axle; wire wheels. No studs; spline integral with the hub
TR3 (Girling axle)-4 and TR4A rigid axle Rear; wire wheels. 110365
TR2-4 and TR4A rigid axle Rear; steel wheels. 100869
TR4A-6 independent suspension; wire wheels. 142799
TR4A-6 independent suspension; steel wheels. 132317

Please note that short studs intended for wire wheel applications should NEVER be used with steel wheels or aftermarket alloy wheels. ALWAYS use the longer studs.

To view the Triumph Catalogue Plates, please pick a car type