Engine, Transmission, wheels/Tyres and Heating/Cooling
- Browse Modified, Uprated & Alternative Parts
- CLICK TO VIEW
MODIFIED PARTS - Browse Original Triumph Catalogue Plates
TR250 Plate N - CLUTCH
Plate No. | Part No. | Description and Comments | No Per Unit | Price | Add to Cart | |
---|---|---|---|---|---|---|
N1AA | 214321 |
CLUTCH COVER ASSEMBLY-BORG AND BECK |
1 | |||
N1 | 515635 |
Cover and straps, sub assemblyRevington TR information: Not available. Use GCC228 |
1 | |||
N2 | 517084 |
Spring, diaphragm |
1 | |||
N3 | 515638 |
Ring, diaphragm spring fulcrum |
2 | |||
N4 | S15634 |
Rivet, shouldered |
9 | |||
N5 | Not serviced |
Plate, pressure |
1 | |||
N6 | 515637 |
Clip, retaining diaphragm spring on pressure plate |
3 | |||
N7 | 514735 |
Rivet, clip and strap to pressure plate |
3 | |||
Not serviced |
Rivet, balance weight to cover |
|||||
Not serviced |
Weight, balance, clutch cover |
|||||
N8 | 148146 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: B & B clutch only |
1 | |||
GCP143 |
CLUTCH PLATE TR4A-6 B&BRevington TR information: Whist this Driven Plate is available new, Revington TR prefer due to varying quality of newly manufactured parts, often having fewer rivets holding them together than were present in the original equipment, to supply an... READ MORE |
1 |
£122.28 Ex VAT @ 20% |
|||
N8A | 517281 |
Facing, packageTriumph Catalogue Remarks: B & B clutch only |
1 | |||
N8B | 214388 |
CLUTCH COVER ASSEMBLY-LAYCOCK |
1 | |||
N9 | 517085 |
Spring, diaphragm |
1 | |||
N10 | 512343 |
Ring, retaining |
1 | |||
N11 | 512344 |
Clip, spring, anti-rattle |
2 | |||
N12 | Not serviced |
Cover, inner |
1 | |||
N13 | Not serviced |
Cover, outer |
1 | |||
N14 | Not serviced |
Plate, pressure |
1 | |||
N15 | 148402 |
DRIVEN PLATE ASSEMBLYTriumph Catalogue Remarks: Laycock clutch only |
1 | |||
N16 | DP0411 |
Dowel, locating clutch cover on flywheel |
3 | |||
N17 | HU0856 |
Screw, set, clutch cover to flywheel |
6 | |||
N18 | WL0208 |
Washer, lock, on set screwThis item has been superceded by WS105090853 - see below |
6 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
6 |
£0.25 Ex VAT @ 20% |
|||
N19 | 142465 |
CLUTCH THROW-OUT BEARINGThis item has been superceded by GRB211 - see below |
1 | |||
GRB211 |
RELEASE BEARINGRevington TR information: Release Bearing TR4A-6. Consider heavy-duty product GRB211HD |
1 | ||||
N20 | 147858 |
Sleeve, clutch throw-outRevington TR information: RTR recommend 147858PB made from very high grade phosphor bronze, which has no small pin preventing rotation and as a result no grooves are made by the operating pins. The original TR4A part was made from... READ MORE |
1 |
£29.09 Ex VAT @ 20% |
||
N21 | 106022 |
CLUTCH OPERATING FORKRevington TR information: The operating pins are included in this part number. If just the operating pins are required, these can be bought separately under part number 100164. Revington TR recommend drilling through this fork, through the shaft and... READ MORE |
1 |
£67.82 Ex VAT @ 20% |
||
N22 | 100164 |
Pin, for fork |
2 |
£3.97 Ex VAT @ 20% |
||
N23 | 056965 |
Pin, taper, fork to clutch shaftThis item has been superceded by 158777HD - see below |
1 | |||
158777HD |
PIN TAPER CLUTCH HEAVY DUTYRevington TR information: This is a hardened taper pin holding the fork to the cross shaft. This help overcome the frequent failure of this pin. Revington TR recommend drilling through the fork, through the shaft and out the other... READ MORE |
1 |
£17.27 Ex VAT @ 20% |
|||
N24 | 030047 |
Wire, locking taper pinThis item has been superceded by RTR5285-2M - see below |
1 | |||
RTR5285-2M |
LOCKING WIRE 1.02mm/MRevington TR information: Locking wire stainless steel 1.02mm dia. per meter |
1 |
£1.45 Ex VAT @ 20% |
|||
N25 | 136354 |
CLUTCH OPERATING SHAFT ASSEMBLYRevington TR information: Consider second hand part 136354SH. TR 2, 3, 4 and 4A use a slightly different shaft 108887. Use roll pin RPS230331 to securely pin the fork to the cross shaft at 90° and to one side... READ MORE |
1 |
£44.33 Ex VAT @ 20% |
||
N25A | 144578 |
Spring, clutch shaft |
1 |
£6.68 Ex VAT @ 20% |
||
N26 | 211060 |
CLUTCH SLAVE CYLINDER ASSEMBLY (1")This item has been superceded by UKC8677 - see below |
1 | |||
UKC8677 |
CLUTCH SLAVE CYLINDER TR250, 5, 6Revington TR information: Clutch slave cylinder TR250, 5 and 6. This part is 1" diameter. A repair kit is available part number GRK4007. GSY129 is a similar cylinder with a smaller bore.109746 is the TR2 part which can... READ MORE |
1 |
£43.90 Ex VAT @ 20% |
|||
Not serviced |
Body, slave cylinder |
1 | ||||
N27 | 513954 |
Spring, return |
1 | |||
N28 | 513952 |
Cup, filler |
1 | |||
N29 | 513951 |
Piston, slave cylinder |
1 | |||
N29A | 513953 |
Cup, spreader |
1 | |||
N30 | 513390 |
Service kit |
1 | |||
N31 | 501207 |
Screw, bleed |
1 |
£3.62 Ex VAT @ 20% |
||
N31A | 513955 |
Boot |
1 | |||
N32 | 138572 |
Rod, push, assemblyRevington TR information: Slave cylinder push rod non-adjustable, TR250, 5, 6 measuring 145mm (5.70") from the C/L of the clevis pin hole to the end. Consider our adjustable rod kit RTR1111K or second hand part 138572SH. |
1 |
£23.57 Ex VAT @ 20% |
||
N33 | 136353 |
Bracket, mountingRevington TR information: Not available new, use Second Hand part 136353SH. |
1 | |||
N34 | HB0813 |
Bolt - Mounting bracket to gearbox and rear engine plate |
2 |
£0.46 Ex VAT @ 20% |
||
N35 | HN2008 |
Nut - Mounting bracket to gearbox and rear engine plate |
2 | |||
N36 | WL0208 |
Washer, lock - Mounting bracket to gearbox and rear engine plateThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
N37 | HB0809 |
Bolt - Slave cylinder to mounting bracket |
2 | |||
N38 | HN2008 |
Nut - Slave cylinder to mounting bracket |
2 | |||
N39 | WL0208 |
Washer, lockThis item has been superceded by WS105090853 - see below |
2 | |||
WS105090853 |
WASHER SPRING 5/16" ID RECT SECTION |
2 |
£0.25 Ex VAT @ 20% |
|||
N40 | PJ8808 |
Pin, clevis - Slave cylinder push rod to clutch operating lever |
1 |
£1.96 Ex VAT @ 20% |
||
N41 | WP0008 |
Washer, plain - Slave cylinder push rod to clutch operating leverThis item has been superceded by WP10510075 - see below |
1 | |||
WP10510075 |
WASHER PLAIN 5/16" x 5/8" x 0.075" |
1 |
£0.44 Ex VAT @ 20% |
|||
N42 | P00009 |
Pin, cotter - Slave cylinder push rod to clutch operating lever |
1 |