Home » Interior, Seats, Hoods Etc. » SEATS » REPLACEMENT RTR BUCKET SEATS

Interior, Seats, Hoods Etc.

REPLACEMENT RTR BUCKET SEATS

RevingtonTR supply these Classic Style Bucket Seats manufactured to their own design and suitable for fitment to many cars, TR's in particular. Our seats are built on a sturdy frame and can be supplied with a variety of optional extras; headrests, slots for harness straps, adjustable lumber support and heater mats. The RevingtonTR logo appears on the backrest of the seat, this can be omitted at customer request. These seats are suitable for TR2-8 and any other car you choose to put them in. Our seats have been successfully fitted to Mini, Spitfire, Vitesse and Austin Healey etc.

Available in a wide range of colours in vinyl and leather, these seats are built on our own steel frames powder coated for long term protection and incorporating multi point mounting plates offering a range of installation options. If you require headrests please order these separately, RTR6114, RTR6114SP. RTR6114L or RTR6114LSP. are listed below.

Please note that headrests are height adjustable and can be completely removed which is useful when a tonneau cover is fitted as the cover will fit without difficulty over the top of the seat with the headrest removed.

Our standard production seats are trimmed to a high standard by professional trimmers. As the seats have complex curves and various materials are used to customers requirements, it is possible that some creasing of the material may occur where it is required to hug tight curves. This creasing usually flattens out with use aided by warming and cooling in the sunshine.

Seat Dimensions: -

The following dimensions will enable you to ensure our seats are suitable for your application.

Width at the base of the seat cushion at the very back 350mm. Width between the hip side tubes 410mm inside, 500mm outside. The inside dimension of 410mm is the dimension important to most customers as this is the dimension that determines if you will fit in or not! This dimension can be increased by frame alteration in exceptional circumstances. we will be happy to discuss this with you. Height of the backrest 590mm. Length from front to back 460mm.

Further dimensioned photos of the side and the rear of the seat can be found in the photo gallery associated with the invidual part numbers.

Tip

If you are a person with a large frame and are concerned that the side flanks of our seat may be intrusive and uncomfortable, follow the simple procedure here to establish what will be a comfortable width for you and compare this with the dimensions listed here. If necessary the seat frame can be modified by RevingtonTR before trimming.

Before we have the seat trimmed we can ensure the seat frames we choose are wide enough for you. We suggest the following: - Get a large cardboard box to hand roughly 500mm x 500mm x 500mm. Have an assistant standing by with a tape measure. Sit on the floor against a kitchen cupboard and push the box to your hip and allow for one hands thickness between your hip and the box. Measure from box to cupboard. This will give us a good measurement to work with, to ensure the seat is not restrictive for you.

Fitting and accessories: -

These seats can be fitted directly onto TR2-3B seat runners, however if your seat runners are in poor condition or you are fitting to a TR4-6 or another marque all together, please order runner kit RTR6094K.

Our seats can now be fitted with heat mats and adjustable lumber supports. See part numbers RTR6125-1 and RTR6125-2 below.

Ordering: -

Standard seats in black with black piping or white piping can be simply ordered by part number. When special colours or materials are required, part numbers suffixed SP for seats and headrests will need to be ordered as listed below. The price shown applies to coloured materials that are readily available to our trimmers. A surcharge may apply should materials to meet customers specification have to be bought in especially.

When we supply seats and headrests in special colours, vinyl, leather or another material of the customers choice, we need to be sure the material used meets our customers approval. The choice of colour is usually a matter of personal choice when the whole car is being re-trimmed (a service we are happy to undertake) but is often governed bu the need for the seats to match existing interior. If you have nothing at all but have an idea of colour, you might choose to send us something close to you preferred colour. This has in the past been as simple as a piece of cereal cardboard box!

If you are attempting to match an existing interior please send us a sample of the interior and piping. This can be cut from a piece of trim with excess material. A good place to look is the base of the quarter panels behind the seats.

We will then see what material samples we have that closely match your samples and if there are shade differences, we will send you a range of colours to choose from. Once you have chosen we will find what is available currently and get samples to you for approval. Finally once the material is with the trimmer we will send you a sample of the actual material the seats will be trimmed from for approval so you can be 100% sure of the exact colour and shade.

This might seem rather long winded but as the seats will be unique to you and you will have paid for them up front, we do not wish to leave anything to chance. It is worth mentioning that choice of vinyl is rather more limited than leather as vinyl is made on massive rolls, not necessarily for the classic car trade, where as leather is dyed by a myriad of leather hide producers in small batches so the available range is huge.

Testimonial

One recent happy customer wrote to us with the following kind words: -

Regarding the pneumatic lumber support for the seats. Having recently made a few longer journey's, e.g. back from Plymouth over Dartmoor, I can advise that the new lumber supports have made a huge difference. Whereas such a journey would have resulted in back problems for days afterwards, with the modified seats there were no ill effects. From my point of view I would consider it as an essential fitment. Overall, a great success. G. J. Somerset.

13 results found.

< Back

Part No.	Description and Comments	Price	Add to Cart
RTR6125 CLICK FOR MORE INFO	SEAT BUCKET VINYL BLACK Revington TR information: RevingtonTR classic bucket style seat trimmed in Black Vinyl material and either black or white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the... READ MORE	£1563.24 Ex VAT @ 20% £1302.70	Available to order
RTR6125SP CLICK FOR MORE INFO	RTR SEAT SPECIAL COLOUR VINYL Revington TR information: RevingtonTR classic bucket style seat trimmed in Vinyl coloured material with black, white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin size... READ MORE	£1702.99 Ex VAT @ 20% £1419.16	Available to order
RTR6125L CLICK FOR MORE INFO	SEAT BUCKET LEATHER BLACK RTR STYLE Revington TR information: RevingtonTR classic bucket style seat trimmed in Black Leather with either black or white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin... READ MORE	£2117.54 Ex VAT @ 20% £1764.62	Available to order
RTR6125LSP CLICK FOR MORE INFO	SEAT BUCKET LEATHER SPECIAL COLOUR Revington TR information: RevingtonTR classic bucket style seat trimmed in coloured Leather with vinyl piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin size of a... READ MORE	£2311.19 Ex VAT @ 20% £1925.99
RTR6114 CLICK FOR MORE INFO	HEAD REST BLACK VINYL BUCKET SEAT Revington TR information: Headrest in black vinyl for RevingtonTR seat RTR6125. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE	£226.20 Ex VAT @ 20% £188.50	Available to order
RTR6114SP CLICK FOR MORE INFO	HEADREST SPECIAL COLOUR VINYL Revington TR information: Headrest in coloured vinyl for RevingtonTR seat RTR6125SP. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE	£259.62 Ex VAT @ 20% £216.35	Available to order
RTR6114L CLICK FOR MORE INFO	HEADREST LEATHER BLACK Revington TR information: Headrest in black leather for RevingtonTR seat RTR6125L. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE	£267.10 Ex VAT @ 20% £222.58
RTR6114LSP CLICK FOR MORE INFO	HEADREST LEATHER SPECIAL COLOUR Revington TR information: Headrest in coloured leather for RevingtonTR seat RTR6125LSP. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE	£301.43 Ex VAT @ 20% £251.19
RTR6094K CLICK FOR MORE INFO	RUNNER KIT FOR 2 SEATS TR2-6 Revington TR information: TR2-6 seat runner kit for 2 seats including all screws etc. required. The kit is supplied with the layout diagram for the holes that need to be drilled in the floor to fit the kit. This... READ MORE	£302.10 Ex VAT @ 20% £251.75	Available to order
RTR6115 CLICK FOR MORE INFO	COST TO SLOT SEAT 2 or 3 slots Revington TR information: Cost to include slots for seat belts (2 or 3 as required) in our RevingtonTR RTR6125 series bucket seats. two are required one each side to accommodate harness type belts. If a crutch strap is to... READ MORE	£128.27 Ex VAT @ 20% £106.89	Available to order
RTR6125-1 CLICK FOR MORE INFO	LUMBER SUPPORT ADD COST Revington TR information: Cost to add adjustable lumber support to our bucket seats in the part number series RTR6125. The adjustment is effected by a air pressure bulb which is tucked away when not in use. Cost is per... READ MORE	£168.85 Ex VAT @ 20% £140.71	Available to order
RTR6125-2 CLICK FOR MORE INFO	HEATER MAT ADD COST Revington TR information: Heated seat option. This part number covers the cost to add a heater mat kit to a Revington TR bucket seat. This sophisticated kit adds a touch of luxury to your new seats. This part... READ MORE		No longer available
RTR6116 CLICK FOR MORE INFO	UNIVERSAL SEAT RUNNER Revington TR information: All cars Universal seat runner, which allows seat to tip. Can be used in TR2-6 for standard seats. Cheaper that standard runner part number 821137. 2 required per car. The floor will need to be... READ MORE	£129.24 Ex VAT @ 20% £107.70	Available to order

Part No.

Description and Comments

Price

Add to Cart

RTR6125

CLICK FOR
MORE INFO

SEAT BUCKET VINYL BLACK

Revington TR information: RevingtonTR classic bucket style seat trimmed in Black Vinyl material and either black or white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the... READ MORE

£1563.24

Ex VAT @ 20%
£1302.70

RTR6125SP

CLICK FOR
MORE INFO

RTR SEAT SPECIAL COLOUR VINYL

Revington TR information: RevingtonTR classic bucket style seat trimmed in Vinyl coloured material with black, white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin size... READ MORE

£1702.99

Ex VAT @ 20%
£1419.16

RTR6125L

CLICK FOR
MORE INFO

SEAT BUCKET LEATHER BLACK RTR STYLE

Revington TR information: RevingtonTR classic bucket style seat trimmed in Black Leather with either black or white piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin... READ MORE

£2117.54

Ex VAT @ 20%
£1764.62

RTR6125LSP

CLICK FOR
MORE INFO

SEAT BUCKET LEATHER SPECIAL COLOUR

Revington TR information: RevingtonTR classic bucket style seat trimmed in coloured Leather with vinyl piping to customer choice, Designed by RevingtonTR, this seat provides comfort and security whilst being as wide as possible given the cabin size of a... READ MORE

£2311.19

Ex VAT @ 20%
£1925.99

RTR6114

CLICK FOR
MORE INFO

HEAD REST BLACK VINYL BUCKET SEAT

Revington TR information: Headrest in black vinyl for RevingtonTR seat RTR6125. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE

£226.20

Ex VAT @ 20%
£188.50

RTR6114SP

CLICK FOR
MORE INFO

HEADREST SPECIAL COLOUR VINYL

Revington TR information: Headrest in coloured vinyl for RevingtonTR seat RTR6125SP. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE

£259.62

Ex VAT @ 20%
£216.35

RTR6114L

CLICK FOR
MORE INFO

HEADREST LEATHER BLACK

Revington TR information: Headrest in black leather for RevingtonTR seat RTR6125L. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE

£267.10

Ex VAT @ 20%
£222.58

RTR6114LSP

CLICK FOR
MORE INFO

HEADREST LEATHER SPECIAL COLOUR

Revington TR information: Headrest in coloured leather for RevingtonTR seat RTR6125LSP. Our headrests incorporate grooved locking rings on one of the two support legs and a locking mechanism in the grommet which is fitted into the top of the... READ MORE

£301.43

Ex VAT @ 20%
£251.19

RTR6094K

CLICK FOR
MORE INFO

RUNNER KIT FOR 2 SEATS TR2-6

Revington TR information: TR2-6 seat runner kit for 2 seats including all screws etc. required. The kit is supplied with the layout diagram for the holes that need to be drilled in the floor to fit the kit. This... READ MORE

£302.10

Ex VAT @ 20%
£251.75

RTR6115

CLICK FOR
MORE INFO

COST TO SLOT SEAT 2 or 3 slots

Revington TR information: Cost to include slots for seat belts (2 or 3 as required) in our RevingtonTR RTR6125 series bucket seats. two are required one each side to accommodate harness type belts. If a crutch strap is to... READ MORE

£128.27

Ex VAT @ 20%
£106.89

RTR6125-1

CLICK FOR
MORE INFO

LUMBER SUPPORT ADD COST

Revington TR information: Cost to add adjustable lumber support to our bucket seats in the part number series RTR6125. The adjustment is effected by a air pressure bulb which is tucked away when not in use. Cost is per... READ MORE

£168.85

Ex VAT @ 20%
£140.71

RTR6125-2

CLICK FOR
MORE INFO

HEATER MAT ADD COST

Revington TR information: Heated seat option. This part number covers the cost to add a heater mat kit to a Revington TR bucket seat. This sophisticated kit adds a touch of luxury to your new seats. This part... READ MORE

RTR6116

CLICK FOR
MORE INFO

UNIVERSAL SEAT RUNNER

Revington TR information: All cars Universal seat runner, which allows seat to tip. Can be used in TR2-6 for standard seats. Cheaper that standard runner part number 821137. 2 required per car. The floor will need to be... READ MORE

£129.24

Ex VAT @ 20%
£107.70

13 results found.