Engine, Transmission, wheels/Tyres and Heating/Cooling

RTR1338N

CLICK FOR
MORE INFO

WHEEL NUT FOR MINILITE WHEEL etc. 7/16UNF

Revington TR information: Road wheel attachment nut with 7/16" UNF thread (standard TR2-6 wheel studs). Suits many wheels including Minilite, Compomotive and any other wheel requiring a conical seal. Sold singularly. Be sure these wheel attachment nuts... READ MORE

£4.63

Ex VAT @ 20%
£3.86

RTR1338LKN

CLICK FOR
MORE INFO

NUT LOCKING ALLOYS KIT 4

Revington TR information: Set of 4 locking wheel nuts 7/16" UNF. Use this set , one for eacj wheel to secure your TR2-6 standard steel wheels and many Alloy wheels (Minilite, Compomotive etc.). This nut is used to substitute... READ MORE

RTR1338LKN7

LOCKING WHEEL NUT SET TR7

Revington TR information: TR7-8 Locking wheel nut set standard and Compomotive wheels set of 4 locking wheel nuts M12 x1.5

£96.07

Ex VAT @ 20%
£80.06

RTR1346

CLICK FOR
MORE INFO

NUT WHEEL SLEEVE TYPE 2B 5/8"

Revington TR information: Wheel nut suitable for 7/16"UNF wheel studs intended for attaching aluminium wheels with a flat face (not conical) where the nut attaches, requiring a sleeve nut with a 5/8" (16mm) plain section 3/4" long where the... READ MORE

£8.77

Ex VAT @ 20%
£7.31

RTR1346SLEEVE

CLICK FOR
MORE INFO

SLEEVE TO CONVERT 5/8" NUT TO 11/16"

Revington TR information: 'Top hat' shaped adaptor sleeve for wheels that need an 11/16" (17.5mm). This Sleeve converts an RTR1346 sleeve nut from 5/8" (16mm) to 11/16" (17.5mm). Wheel nut RTR1346 is suitable for 7/16"UNF wheel studs intended for... READ MORE

£3.90

Ex VAT @ 20%
£3.25

RTR1259

CLICK FOR
MORE INFO

NUT WHEEL AMERICAN RACING SS

Revington TR information: Wheel nut manufactured from stainless steel for American racing inc. wheels and other wheels requiring a sleeve nut. These nuts are of the sleeve type where the sleeve is 17.5mm diameter, 15.5mm long and the thread... READ MORE

£23.27

Ex VAT @ 20%
£19.39

RTR1385

CLICK FOR
MORE INFO

STUD WHEEL REPAIR TR2-4

Revington TR information: TR2-4 (and TR4A Live Axle) Repair screw-in type Wheel Stud.TR2-4(and TR4A Live Axle) Wheel stud rear axle, with oversize thread into the hub. This stud enables torn out threads to be repaired. It is not... READ MORE

£19.32

Ex VAT @ 20%
£16.10

RTR1385+10

CLICK FOR
MORE INFO

STUD WHEEL REPAIR+10mm TR2-4

Revington TR information: TR2-4 (and TR4A Live Axle) Repair screw in type Wheel Stud 10mm longer than standard. It is not uncommon for this type of stud to pull out of the hub, if this happens Revington TR are... READ MORE

£19.58

Ex VAT @ 20%
£16.32

RTR1379

CLICK FOR
MORE INFO

TAP M12 X 1.25 2ND

Revington TR information: Special tap used with stud RTR1385 and RTR1385+10.

£52.22

Ex VAT @ 20%
£43.52

217602S

CLICK FOR
MORE INFO

SPACER W/W TO ST/WHEEL TR2-6

Revington TR information: TR3G-6 Accurately machined spacer approximately 6mm thick. This spacer fits behind a wire wheel adapter and enables the adapter and 4 adapter nuts to be flitted without shortening wheel studs. The spacer was designed by... READ MORE

£37.02

Ex VAT @ 20%
£30.85