Choose Car Type


then
Search for parts
or
Browse for parts

Home  »  Fuel and braking systems  »  METERING UNITS AND INJECTORS  »  METERING UNITS  »  METERING UNIT TR6CP SCREW ON (Exchange)

Exchange METERING UNIT TR6CP SCREW ON

Part No:
312529EX
Price
£451.90
Price Ex VAT @ 20%
£376.58
Deposit *
£100.00

IN STOCK This part is immediately available

* Deposit Required: A deposit is required for this part. This will be refunded in full or in part on receipt of exchange item, depending on the condition of the part received. Vat at the prevailing rate will be added to the deposit if applicable.

This Metering Unit, sold on an exchange basis, suits CP commission numbered TR6's where the tick over adjustment is by an air bleed valve at the front of the first inlet manifold. The spill return has a screw on connection. Originally fitted from CP75315 to CR1

This Exchange Metering Unit attracts a deposit until a reconditionable unit is returned for credit. This cost is shown with the displayed price. The unit returned must be complete and with plastic side cover and cap fitted. Units that have been dismantled or are seized may result in loss of refund in part or full of the deposit depending on what is found when the unit is dismantled.

As many TR's these days have been rebuilt and modified it is essential to order the correct Metering Unit for your car. We have listed below all 4 TR variations. There were in fact 8 different metering units fitted to the entire TR range, however 4 of them had such minor calibration variations that the list has been condensed to 4 that cover all models.
Having chosen the correct Metering Unit for your car, the unit may well still need further tuning to suit the exact parameters of your car. Over boring, head work, exhaust options and inlet filtering will all influence the fueling required; notwithstanding the change in fuel available today being quite different to that available in the 1970's.
RevingtonTR can help here as we offer a bespoke tuning service using our 800Hp rolling road and our unique metering unit fuel modelling software. Please ring for more information.
 
The following Metering Units are offered on an exchange basis and cover all usual applications: -
308205EX Metering Unit TR5, Non Air Bleed type
309154EX Metering Unit TR6CP Air Bleed type with Push On return pipe
312529EX Metering Unit TR6CP Air Bleed type with Screw On return pipe
RKC0220EX Metering Unit TR6CR Air Bleed type with Screw On return (Triumph referred to this unit as Home Market only - We supply it now for all CR applications)

Other Metering Units listed in original parts books (reference only): -
312070 TR6 fitted from CP52534 to CP53160
312097 TR6 fitted from CP53161 to CP75314
RKC0094 TR6 CR Export only
RKC0095 TR6 CR High altitude only.
 
Note: - If you are using your PI TR at high altitude then special additional tuning will definitely be required otherwise the engine will run constantly rich

Fuel and braking systems

To view the Triumph Catalogue Plates, please pick a car type